Beautiful tunes man, very relaxing compared to others that have annoying loud music. Thanks for the vid.
@snezzysonazi2851
3 жыл бұрын
Finally got this usefull video... Thx bro
@clmfilms8103
2 жыл бұрын
How does the rebound and compression adjustment work?
@matthewwatkins9971
3 жыл бұрын
Thanks for the useful video, I'm really struggling to find out what the ifp level should be at, it looks like you used 28mm from the video, could you clarify what depth you used and if it works well like that?
@yongchannel6212
3 жыл бұрын
is DNM RCP 2s good and durable ..?
@jerryx2000
2 жыл бұрын
Is this shock any good?
@rIP2693.
5 ай бұрын
what is the size of the shrader valve that you used for the air cap?
@joeycottontail943
11 ай бұрын
My rcp-2 just blew apart completely. Had to zip tie to make it home 7 miles on my Motoped. Should I grab a rcp2s or find something a little beefier? I’m 170 pounds but often ride with heavy backpack.
@user-jw4hq6uz1v
6 ай бұрын
whta type of fluid is used to fill the damper ?
@Kroviakjm
4 ай бұрын
How many inches did you push the plastic plunger in?
@hunterwright386
4 жыл бұрын
Ah the tingling feeling again...
@fabiotorre178
2 жыл бұрын
Non ci sono ricambi da sostituire? Era senza olio di serie?
@dahr21
3 жыл бұрын
Bro, what is the oring ? Valvule compression?
@MADMTB9
Жыл бұрын
Hiii. Do you know how to service a DNM Backdraft A0-1 rear shock? Its an old shock.. please
@pauljaven9458
3 жыл бұрын
Hey man. How much pressure did u add?
@kostaachin4428
3 жыл бұрын
What tool do use to tighten the shock spring preload lock ring? You don't show that last step in your video. Thank you.
@rondg2
3 жыл бұрын
just hand tight. i'm not putting a lot of preload
@shubhammathur4118
4 жыл бұрын
@rondg2 I have been working on a project for maintenance of dampers. Can I use snaps from your video?
@rondg2
4 жыл бұрын
Sure
@edisoncarlosmagallon2561
2 жыл бұрын
What model DNM?I want buy DNM for my dh bike 240mm
@alireza071
3 жыл бұрын
Good video but does it make any different to the shock like make stiffer or anything as my new rcp-2s very soft anything i can do to stop that or has to upgrade the 550lb coil to 750lb?
@rondg2
3 жыл бұрын
shallower IFP depth makes it more progressive. if 550 too soft then move the shock to a different mounting point if your frame allows it, if not then you gotta get a stiffer spring
@lambertricalde1218
2 жыл бұрын
How has the shock been working for your since the service?
@rondg2
2 жыл бұрын
it's been working perfectly. and it's on an electric dirt bike, a lot more stress than a bicycle
@ivan_di_dio97
Жыл бұрын
Hi , what's the distance of IFP piston in the piggy back ? In the video with the caliper you don't see the depth measurement.
@rondg2
Жыл бұрын
don't worry it's not critical. this isn't for a space mission
@surronzak8154
2 жыл бұрын
Is this the same as the one on the sur ron ? I think I need to service mine cause I have no more compression or rebound dampening any more
@rondg2
2 жыл бұрын
Yes same model
@jblbassslayer3108
4 ай бұрын
What oil did you use for it? The whole process is clear to me besides that.
@rondg2
4 ай бұрын
now using putoline 2.5wt
@dagconst1
3 жыл бұрын
Killer tune
@basticf
2 жыл бұрын
Ifp height?
@markcm
Жыл бұрын
Thanks for sharing the video. I am wondering how you established 200psi for your fill? I watched your video on the Schrader valve mod and was thinking if the factory uses a rubber plug and fills by poking a needle through the plug, would that rubber plug even hold 200psi? I have no idea myself, I'm asking incase you have any additional insight.
@paulpags1256
4 жыл бұрын
Where di you get the spacers?
@rondg2
4 жыл бұрын
What spacers?
@MrAnd-YK
2 жыл бұрын
What kind fluid you use to fill the tube??
@rondg2
2 жыл бұрын
putoline 2.5wt
@n8_vel868
Жыл бұрын
I use the cheapest dnm air shock they sell and had it for about 2 years, do you know if it can be serviced, since I can't find anything or any service manuals for it. Thanks!
@rondg2
Жыл бұрын
just download pretty much any air shock service manual. they're all very much similar. just do an air can service, don't go looking for trouble inside the damper
@n8_vel868
Жыл бұрын
@@rondg2 yeah the damper I heard is sealed an non serviceable but I'm trying to take the air can off, and it's a pain. Even wrapping a tube around didn't help😂
@cameronwells5648
2 жыл бұрын
Been looking around to find the dimensions of the spring! I want to swap it out for a 450-475lb rather than that whopping 550! How long is the spring?
@dhicon45
2 жыл бұрын
I just bought a foxshox steel coil spring 450x2.0-2.25. It all depends on your shock strokes and your recommended spring rate
@Cpt_zheng
2 жыл бұрын
@@dhicon45 can i know what exactly spring did you order? i’m searching for one too, thanks
@MadGQ
7 ай бұрын
@@Cpt_zhengit depends what the eye to eye length is, just check with the seller you brought from what the stroke is, then convert from mm to inches and you’ll get the right spring dimensions
@HuberhRodri
4 жыл бұрын
Hi, how are you, what an excellent and interesting video, I liked it a lot in the way I explain it, only I have some questions, it can help me, the first is how he got the cover to inflate it with air or where I got the shock absorber, because it is pressurized with nitrogen and you did it with air how you did it or how you modified it I await your response, thank you
@rondg2
4 жыл бұрын
Hi pls see my other video about Schrader valve mod
@anicalmech3285
3 жыл бұрын
Hi. Would you tell me where to buy that adapter? Or how can i find it?
@rondg2
3 жыл бұрын
what adapter?
@anicalmech3285
3 жыл бұрын
@@rondg2 Thanks for replying. A bolt which attached to gas tank. maybe flange?
@rondg2
3 жыл бұрын
@@anicalmech3285 attach a shrader valve so you can pump it up w/ a shock pump
@toddmargeson3330
3 жыл бұрын
So how deep into the reservoir does the IFP go? I see you measure it with the vernier caliper, but where did you set it? (And where did you find that info?) Thanks.
@rondg2
3 жыл бұрын
I don't remember specifically but the shallower it is the more progressive
@mrmanny
5 жыл бұрын
What weight shock oil did you use? Thx
@rondg2
5 жыл бұрын
Stock oil is probably 3wt
@hunterwright386
4 жыл бұрын
rondg2 do you know where I can find the exact weight?? What weight did u use??
@mrmanny
4 жыл бұрын
@@hunterwright386 Check your local motorcycle shops...they may carry 3wt oil.
@paulerickson4656
4 жыл бұрын
Diff question - where did you get replacement o-rings/seals?
@egiepratama3735
4 жыл бұрын
please input for the frame only 165mm rear shock, for the 190mm dnm burner to be 165mm, can it be tricked? Please help
@Muraatdeekur
3 жыл бұрын
Did you found a solution? Otherwise it can be done by adding 25mm washers between piston and the cap to make it shorter. Bu you will reduce your travel go for ao 38 instead?
@cristobalcortes5422
3 жыл бұрын
Wich oíl use in the shock?, good video!
@rondg2
3 жыл бұрын
2.5wt fork oil
@Cornel1001
3 жыл бұрын
I wish to know if DNM has maintenance parts for sale !
@rondg2
3 жыл бұрын
contact DNM directly in taiwan
@CesarFrancisStaMaria
2 жыл бұрын
How to fix compression hub wont turn? Thanks
@surronzak8154
2 жыл бұрын
WD 40 and plaing with has solved the issue for me
@rewind9536
4 жыл бұрын
Doesn't it work better if you fill it with nitrogen instead of air?
@davewalkerden
4 жыл бұрын
Regular air is 70% nitrogen anyway so unless you're racing at the World cup you won't notice the difference
@kenferguson3349
3 жыл бұрын
Air is 79% Nitrogen, 21% O2.
@rewind9536
3 жыл бұрын
It was something about longevity and oxydation? Can't remember, so must not be important.
@alejandropedraza9911
4 ай бұрын
The difference between O and N is that Nitrogen is less sensitive to temperature, so it does not varies its pressure with temperature changes. As he said, if you're not an expert rider running a world cup, you won't notice any difference. (And if you are, you wouldn't have this beautyfull budget piece of crap jajaja)
@mhrepoman
2 жыл бұрын
Holy crap you wasted a lot of oil!
@MarcosPaulo-lg9ce
2 жыл бұрын
Qual óleo devo usar?
@dionereisdasilva9673
2 жыл бұрын
Coloquei um da motul SAE 7.5W sintético dando manutenção nele agora qualquer coisa te falo como ficou
@khdjas7214
10 ай бұрын
Are these DNM good ?
@ozanhsyns7715
4 жыл бұрын
Oil w ?
@adriaan3649
4 жыл бұрын
probably W5 like most suspension...?
@rondg2
4 жыл бұрын
2.5wt
@ahmedsakr7196
3 ай бұрын
0 experience you add so much oil OMG
@rondg2
3 ай бұрын
correct that was the first time i ever did that
@jeremyorellana5079
3 жыл бұрын
No lleva nitrógeno el shock
@rondg2
3 жыл бұрын
air is fine, it's mostly nitrogen anyway
@ronbradshaw7404
2 жыл бұрын
Someone should make a video on the right way to fill and bleed a shock, you are not doing it right :( . Been there, done that thrust me!.
@synthlaab
4 жыл бұрын
not correct procedure
@rondg2
4 жыл бұрын
Probably why it worked so well LOL
@Vginoda
5 жыл бұрын
Why? 🐅
@mrmanny
5 жыл бұрын
Maybe oil leaked past the seals? Didn't see where oil was removed...only added.
Пікірлер: 88