I love the klinking as you rummaged for a tool! Made my day!
@amd65ak47
2 жыл бұрын
I changed out the internal guts on mine to another brand a higher end brand starts with F ends with X internals. The only thing it had to be machined custom was where the air valve cap in a couple other little things because even though it's a DNM fork it is way overbuilt extremely strong and I run it on a 2008 Kona stinky coil deluxe now it's 160 in the front and 160 in the rear The best all-around bike I have and I've had this fork about 5 to maybe 8 years and have never had an issue after changing internals
@DryftKult
2 жыл бұрын
Which cartridges did you use? 36, or 38?
@SebastianNaOsle
Жыл бұрын
thank you mon! How did you choose what to change?
@amd65ak47
Жыл бұрын
It's been a long time but I use 36 and 38 parts mix match clips from 38 bushing piston from the 36
@brianpham2584
Ай бұрын
@amd65ak47 did you have to adapt an RC2 damper onto it somehow? The nut on top is way bigger, but I want to do similar.
@no_Ray_bang
3 жыл бұрын
I'm really excited about the double disc brake possibilities... I think you should rig up a set of cantis for it as well for UNLIMITED STOPPING POWER!
@olegpetelevitch4443
3 жыл бұрын
I have the same forks ! I added 15mils of oil through the rebound switch take off nob move to side inject in space between then put back ! also stanchen fork seals undo then pack with sram butter !
@DryftKult
2 жыл бұрын
I have the early usd120 coil forks with the billet crown on my 2002 Kona Stuff, this video is the closest thing I can find to a service manual.
@SebastianNaOsle
2 жыл бұрын
Many thanks for showing the disassembly! It's been more than 1 year since the "preview", any impression on the performance? How often should it be serviced? Any weak points? Why don't you post a short review?
@TryboBike
2 жыл бұрын
I can't. I had to make some tough decisions when I was off KZitem. One of them was selling off the bike with this fork. For what I had it was ... average at best. Not very sensitive and overdamped.
@SebastianNaOsle
2 жыл бұрын
@@TryboBike thank you!
@patchesthejaybird8431
3 жыл бұрын
Carry the small hammer in your bike pack, LOL! Looking forward to the review of this fork. I don't doubt the chainsaw bar lube, or whatever you used is better than nothing.
@mtbboy1993
3 жыл бұрын
No long travel single crown fork is perfect as they will creak due to the load, but bow I am trying Ext Era, the Fox 36 creaked and made snapping sounds, it was horrible noises, now I will see how Era does, it has a straight steerer but a beefy crown that has the taper instead of steerer.
@lucideuphoria7092
Жыл бұрын
I had the dreaded steerer creak on a 32 talas and 34 float. Horrid stuff. From day one which pissed me off. They replaced the crown and steerer like three times under warranty and ended up giving me an entire new fork as I was not happy but It reappeared again within a week. Especially considering my suntour raidons don't make any noise. Crazy shit though, I have a 32 Van here with 9mm QR and it was making the same click/creak especially when clamping the brakes and rocking the bike back and forth. For some reason on the qr fork a bolt up solid axle completely got rid of the cracking sound. Still don't know why. Moved back to qr a few times and its back immediately.
@matess3655
Жыл бұрын
I love how the sander just says ''ass''
@mtbboy1993
3 жыл бұрын
Great content. Thx for sharing the less common stuff.
@timjohns3743
2 жыл бұрын
You need a repair stand. Clamp the steerer tube and assemble one let at a time!
@spaunfalkore
2 жыл бұрын
Если в ногу с воздушным картриджем заливать масло еще допустимо, т.к он разборной, то в ногу, где закрытый масляный картридж - нет, либо нужно быть крайне аккуратным с его количеством, т.к через уплотнитель картриджа масло может попасть в сам картридж и в итоге заблокироваться. If it is still permissible to fill the leg with the air cartridge, because it is collapsible, then it is not possible to fill in the leg where the oil cartridge is closed, or you need to be extremely careful with its quantity, because oil can get into the cartridge itself through the cartridge seal and eventually get blocked.
@modestmullet
3 жыл бұрын
looking forward to the review
@freerideisnotdead655
Жыл бұрын
Could you contact me please? This is strange, because on my fork there is no bolt at the bottom and there is no cartridge in the air leg.. Its just a poor valve or something that i cant get out.. the fork dont work at all.
@tougeattack123
3 жыл бұрын
im having hard time to install the bottom alen bolt i removed to add some oil becouse it was empty an cant screw it back
@mrupholsteryman
3 жыл бұрын
USD...was excited thinking it was US dollar 6. Was thinking wow! What a deal! Haha! I'll watch to see the unboxing now... 😇😎😀
@IVAN19882705
8 ай бұрын
Hello dear friend is there an open damper oil bath in the plug?
@TryboBike
8 ай бұрын
Cartridge.
@IVAN19882705
8 ай бұрын
@@TryboBike is there an open damper oil bath in the plug?
@TryboBike
8 ай бұрын
@@IVAN19882705 Not really. It was solid lubricated. I added some oil but it quickly spat it out.
@-IE_it_yourself
3 ай бұрын
can someone please link me a video where someone rides the fork?
@mdraihan1067
3 жыл бұрын
can you give review with himalo 36mm fork??
@mtbboy1993
3 жыл бұрын
The issue Fox has is too much suspension grease resulting in reduced performance.
@lucideuphoria7092
Жыл бұрын
fox doesn't and hasn't used grease in any of their forks. They use 20wt gold as bath oil and 5-10wt fork oil in the damper. The Air Spring uses slick honey/slickoleum on the seals and fox float fluid which is basically gear oil in the air chamber. The only grease is a slither on the dust seals and the orings in the air chamber.
@sklivello
2 жыл бұрын
I'm disappointed with this fork. Poor seals - oil leaks through legs. Oil also leaks through bolts. Fork stacked sometimes. So I slightly modified the damper. Works somehow but screams on bottom out...
@SebastianNaOsle
2 жыл бұрын
why don't you post a review on it?
@dasauto7346
3 жыл бұрын
09:43 "After finishing work put on underwear" :D
@VerySoggyBread
3 жыл бұрын
Is it boosted?
@TryboBike
3 жыл бұрын
Nope. Just 15x100mm
@3pedalpodcast
2 жыл бұрын
Yes it’s 15x110* not 100
@ghafoori.
2 жыл бұрын
Use 15 ml of atf llD or lllH
@pakdmkr5532
3 жыл бұрын
Top.review stancion size
@TryboBike
3 жыл бұрын
35mm
@MegaMitrandir
3 жыл бұрын
and the crown from suntourmanitoudnmretc - all the same, shame ((
@TryboBike
3 жыл бұрын
DNM is doing their own thing. They have been since at least 2007. That was when i first saw those.
@nobrakes7247
3 жыл бұрын
@@TryboBike earlier bro I have dubble crown USD 180s from early 2000
Пікірлер: 47