Your video should show both vacuum and your drum are empty, then use the saw, then show the insides of vacuum and drum.
@AlanCase-qn3tw
2 ай бұрын
I’ve got a very similar setup in my garage/workshop. I use a manifold feeding 3 zones . Works GREAT!
@dougpeterson5186
6 ай бұрын
They work even when plumbed backwards like I did. They work better when plumbed right
@joedance14
Жыл бұрын
It will work better if the drum is emptied before it approaches full. I remember reading about this a few years ago, but don’t recall the exact amount where performance dropped off rapidly - meaning less separation and more dust getting pulled through. I generally try to empty the drum when it’s about 1/3 full.
@crimsonwoodworking9609
Жыл бұрын
Thanks, good info
@wmiller7208
Жыл бұрын
You can't breathe in those big chips. It's the stuff that you don't see that is dangerous. Put a air quality meter in your shop and you will think otherwise of your system.
@AaronGeller
10 ай бұрын
But that’s NOT the point of the separator. It separates chips from fine particulates so that your fine filter doesn’t get clogged and is more effective.
@Red989
6 ай бұрын
How does that shopvac work with the table saw? I've read that they're not as effective as an actual dust collector but seems to be working well enough for you.
@crimsonwoodworking9609
6 ай бұрын
It works great for the chips a table saw generates. Removing the fine dust is tough without a true dust collector. If you have a small shop, use this method and a dust mask. Makes clean up a breeze. The shopvac I use was bought at a yard sale for 5 bucks because the wheels were missing. Give it a try.
@suzannehofer2541
8 ай бұрын
Wish I knew how to do this sort of stuff! Instead, I am at the mercy of HD. Just trying to find out what size shop vac I need for a small shop to attach to tools like a chop saw or table saw?
@crimsonwoodworking9609
7 ай бұрын
You can buy one of these already made. It's called Dust Deputy. Works great
@mavirek
11 ай бұрын
Couldn't a pillow case, plastic milk jug or some other common item be secured to the circular saw tube attachment to collect dust blown out?
@bishop5166
9 ай бұрын
Sounds feasible but it's going to pass thru the little holes in the fabric. You can only filter out so much before it becomes ineffective.
@andrewr2650
3 ай бұрын
if its a bag that will let air pass through it will collect some, a plastic jug would collect very little because the air moved by the saw will have to go somewhere else and the chips will follow the air. table saws are not very good about dust collection to begin with, they tend to fling stuff everywhere so having suction is a huge help.
Пікірлер: 14