I dont mean to be so off topic but does any of you know a trick to log back into an instagram account..? I stupidly lost the password. I would appreciate any help you can give me
@reecekairo4493
3 жыл бұрын
@Zachary Cohen instablaster ;)
@zacharycohen183
3 жыл бұрын
@Reece Kairo I really appreciate your reply. I got to the site thru google and im trying it out now. I see it takes quite some time so I will reply here later when my account password hopefully is recovered.
@zacharycohen183
3 жыл бұрын
@Reece Kairo it did the trick and I finally got access to my account again. Im so happy:D Thanks so much you saved my ass!
@reecekairo4493
3 жыл бұрын
@Zachary Cohen Glad I could help :)
@thecodedperk2829
18 күн бұрын
this was i think the best guide to this I could've asked for, love your energy
@rajmalik3855
3 жыл бұрын
Your reviews of audio equipment are the most honest. Thank you and keep up the good work; from USA.
@jogjones
3 жыл бұрын
I love this channel, yeah.
@careystuart
Ай бұрын
Veddy Good,Yeah?
@cameronkrause4712
3 жыл бұрын
thanks for bringing some common sense back into audio- I wish a lot of younger folks would listen to what u have to say. I have a friend that recently bought a big Mcintosch and he spent a lot of money on it, and he is puzzled as to why it does not sound as good as the Creek amp that he wanted to replace. Big watts-Big money does not always equal great sound.
@stereoreviewx
3 жыл бұрын
Wow that sounds like a costly disappointment how much is the Macintosh can I ask
@rationalmartian
3 жыл бұрын
Sounds like a bit of a mismatch in tackle. Or possibly expectation. Either way that's gott'a be a right pisser when you've lashed out McIntosh money.
@MichaelYates
3 жыл бұрын
Excellent Video, very well explained. A lot of people think more watts equals better sound.
@drs-Rigo-Reus
3 жыл бұрын
It might be Calvin..
@MichaelYates
3 жыл бұрын
@@drs-Rigo-Reus Thanks Bob, I think I will play safe and edit post
@stereoreviewx
3 жыл бұрын
It’s Kelvin actually with a K bar long since stopped caring 😀
@MichaelYates
3 жыл бұрын
@@stereoreviewx Thanks Kelvin, did not want to offend. I know some people take it personally, but like you never worried me. Have a nice Christmas & New Year, long may the music play.
@zindahoon
3 жыл бұрын
Cheers Michael and Kelvin , you both of you are doing excellent work for newbies like me , I think everyone all your subscribers appreciate your approach to Vintage Hifi stuff .
@Polytechnic1977
3 жыл бұрын
In the 1970 's I seem to remember power output was often quoted as Say 25 watts RMS and sometimes 25 watts peak. 25watts RMS was about 40 watts peak peak.
@Serlothewizkid
Ай бұрын
Your right
@rossparry3168
3 жыл бұрын
I had as sansui au101for 30 years and never questioned the sound ever. Never got sick of listening to it with my vinyl. Great amplifier.
@stereoreviewx
3 жыл бұрын
The total joy that Amp
@grantbassett2048
3 жыл бұрын
Hi Kelvin, I love the information, and the way you come across, you get the point out in a way people want to listen. And the Amplifier/Speaker combo is the key. Thanks for been a good teacher & having a "pleasant Rant" to get the point across. I was a teenager in the 90s, so 50w Amplifiers & floor standing speakers 100ish w handing seemed to work for years. As time goes on I changed houses, Rooms, music tastes. That all has an impact on witch hifi to use as you said. But likeing music from Don Williams - Queen - Motorhead...so on, getting a system that plays them all to your ears is another thing! 😄 haha!!! Cheers For Reading this. I Subscribed to you. Have a Good Christmas, 🍻 Cheers Grant, West Yorkshire 👍.
@JohnnyMotel99
3 жыл бұрын
I worked at a post production house, we had those Rogers speakers in the edit suites and racks of HH 100watt amps.
@aihuateoh3447
3 жыл бұрын
Another enjoyable and informative video Kevin. Because of your review that I got myself the Sansui AU-101, and you are right, this 15 watts Sansui sounds just delightful. No problem whatsoever driving my different bookshelf speakers (they are not hard to push anyway) compare to my other amps with 30-40 watts in a small room. I came to realise and appreciate that room size and gears matching are more important than just watts. My late father has a mono Sansui PM880 valve receiver (manufactured in 1958 but no info on wattage) which can fill up the living room with ease with a three way speakers which consist of a 12 inch woofer. Just got it serviced after staying dormant for almost 40 years. Can't wait to test it out. Thank you once again for this great review.
@astolatpere11
3 жыл бұрын
Bet it will sound amazing.
@aihuateoh3447
3 жыл бұрын
@@astolatpere11 I I'm really excited. Looking forward to testing it during the Christmas holidays - a Christmas present for me. :-)
@astolatpere11
3 жыл бұрын
@@aihuateoh3447 I believe that the reason Sansui receivers from early 70s sound so good is that their engineers used the voice of their tube amps as a guide. Good luck.
@aihuateoh3447
3 жыл бұрын
@@astolatpere11 Cheers! Merry Christmas!
@newpath.newpath2010
3 жыл бұрын
I have a Crest 300wpc amp in my place. No fans. I run it with the gain knobs way down, keep it in class A and it sounds really good no matter the speaker.
@crisquimicafacil1886
18 күн бұрын
I really like very much of your videos! Congratulations because they are very simple to understand and you always say the truth about that is the most important: the sound!!! Not trademarks and values are the part more important! Congratulations again!
@stereoreviewx
17 күн бұрын
Thank you very much!
@thisisnev
3 жыл бұрын
Couldn't agree more, Kelvin! To this day the receiver wars of the late 70s have a lot to answer for - American audiophiles in particular seem to think that anything under 100W is 'mid-fi'. I have amps rated from 18W to 80W, driving fairly inefficient speakers in a smallish room, and the amp power rating makes no difference whatsoever. Even in my living room, a 38W Luxman L-113A driving Monitor Audio MA16 speakers could fill the room nicely at around 10 o'clock on the volume dial. The great leveller in vintage amps is headphone listening, where the power rating of the amp makes no difference!
@hugobloemers4425
3 жыл бұрын
I have a Luxman L210 (about 2 X 50W) paired with vintage Magnat Pro-15 speakers, The combination cost me less than 300 Euro and it goes much louder than my room (and neighbors) can handle. And it sounds musical.
@ptangyangkipperbang3295
3 жыл бұрын
Thanks Kelvin, always a pleasure.
@hugobloemers4425
3 жыл бұрын
We are going round and round in circles, these discussions where already there 40 years ago. But it is good to hear this again from somebody who has been involved with it for this long.
@stereoreviewx
3 жыл бұрын
Hugo I’m going to make a prediction here and now to you just because I have to say this What’s going to happen is manufacturers are going to come out with thin-walled speakers that are very sensitive and low power amplifiers And they’re gonna say it’s a new brilliant idea. I think this might happen because it will also save them a lot of money which is their major concern. Thanks K
@natanpierce495
3 жыл бұрын
Good point. I have some vintage Bang & Olufsen Beovox (1971) 15w, and have been running 150- 300 watts to them through a NAD amp. No issues, sound amazing. Been doing this for over 30 years. Of course I never go above half volume either.
@chinmeysway
2 ай бұрын
yah it really just depends on watts actually used. 15wpc is pretty damn loud from 10 ft away
@26Jorgeb
3 жыл бұрын
Thanks as always Kelvin.This gives me more confidence with my 2015 Baby Marantz.
@zer0dave
9 ай бұрын
I'm late to the party but this is a great video, thanks for making it. I ended up getting a Vista Audio Spark 2 (20 WPC) for my Elac Debut 5.2's and I was initially worried that it wouldn't be enough power. However, I was quite surprised when I plugged my Schiit Modi Multibit 2 into the Spark, hit play on the CD player and turned the volume to 9 o'clock on the Spark. It was actually extremely loud and when I turned it halfway, it was so loud that I had to back away from the speakers and go to the other side of the room. A lot of people dissed the Spark for being "low power" but that was not my experience at all! Nice channel, subscribed!
@francescotenti193
3 жыл бұрын
Excellent video, as usual. My listening room is just shy of 25 square meter and my 20 wpc Pioner SX550 has more than enough power to feed the RP-600M speakers, the volume knob it rarely needed above 4-5.
@jmad627
2 жыл бұрын
The room I use for my SX 780 is about the same size and I have plenty of power as well.
@chinmeysway
2 ай бұрын
4 or 5 ? not sure what that means noon ish or 9am ish
@francescotenti193
2 ай бұрын
@@chinmeysway half way up, so it would be noon or just below but bever above.
@Drivehead103
3 жыл бұрын
Well done, glad I subscribed. Extra watts are nice to have for the added Headroom . And of course they need to be clean Watts . 30 watts of clean power sounds better than 500 watts of flea market power, learned that a long time ago. I think it is better to have too many watts than not enough. Speaker damage can occur whenever the amplifier is asked to play louder then it can handle.
@jasonahdjfhsdfg
3 жыл бұрын
I have numerous integrated and power amps rated from 12W to 140W, they all will drive any speakers I own to neighbour annoying levels. In fact one power amp I own has VU metres and I was surprised to see that even at quite loud volumes I rarely went over 0.5 to 1 watt with quite sensitive speakers. It was quite surprising to me that you see all these amps with huge power ratings and most people will rarely get past probably 5 watts of the output. I mean I have a QUAD 520C which literally was used in a cinema so if it can power a cinema at a high volume I’m certain I will never get near its peak output.
@rayfordham9230
3 жыл бұрын
Many years ago at a Hi-Fi exhibition I had a conversation with Jim Rogers, an audio pioneer and of JR 149 fame ( LS 35a clone, same drivers slightly different crossover ), he told me the 149 and the 35a needed a minimum of about 35 watts 50 watts being preferable more if you wanted to avoid running the amp into peak distortion and frying the T27 tweeter. That does not mean huge volume levels it means having the headroom to deliver a peak power requirement momentarily without running into distortion, the death nell for tweeters. It is surprising how much power is needed even at modest levels to hit a peak cleanly when driving a fairly difficult load
@Radfordperson
3 жыл бұрын
I knew Jim, was a great guy and his knowledge of Hi Fi was incredible. I still have some speakers made from units recommended by him and supplied by him. That would be about 1968. EMI 13"x8" with massive magnet, plus Celestion HF1300 and STC (now Coles) 4001G. I built those speakers and they were very good. Soon after, B&W brought out the DM3 which was almost the same. My speakers still work and sound excellent.
@stereoreviewx
3 жыл бұрын
Yes well I don’t really wanna argue with Jim Rogers ,but . Well I’m just loving the LS35A is with the 15 what Sansui or even the 12 what Sansui receiver it just sounds so good and the bass just feels a bit clogged with more power. Now I’m not super technical person but my impression is that Sansui is have the headroom for peaks is kind of why I like them . Thanks For the feedback though great story all information is good when I fry my tweeters I will know why. Cheers K
@rayfordham9230
3 жыл бұрын
@@Radfordperson Hi, casting my memory back again I think I remember a friend of mine at the time building virtually the same thing. He used an EMI bass driver and the Celestion but wasn't really happy so after a few phone calls rebuilt them with the addition of the 4001 ( super tweeter?). I can't remember what he did with the crossover, I didn't know about the DM3s close relationship. Thanks for the reply please feel free to correct me if I'm wrong about the 4001 being a super tweeter it was 50 years ago afterall
@Radfordperson
3 жыл бұрын
@@rayfordham9230 Hi Ray, yes, the 4001G is a supertweeter. The main difference between my home constructed speakers and the B&W DM3's, is that mine use the Celestion HF1300, the DM3's use the HF1400. The 1400 is just a 1300 with a slightly larger magnet. Back to Jim Rogers, I used to get some of his prototype speakers for home trial, not one was bad. I was particularly impressed by his Wafer speakers, so much so, I built clones of them.
@rayfordham9230
3 жыл бұрын
@@Radfordperson Hi' me and my friend went to a Hi-Fi exhibition in a hotel at Heathrow, It was when the JR 149 came out so a few years later. We headed for the JR room as I was interested in the 149s ( which I bought some weeks later), that was where I discussing power requirements with Mr Rogers as per my original post, when I had finished I took a closer look at the speakers leaving my friend and Mr Rogers heads down over a table, my friend came away grinning from ear to ear Mr Rogers had drawn two crossover diagrams on a hotel menu for him to try in his speakers to integrate the two tweeters better. A very nice man. I really envy you getting access to that equipment back then, and then building your own version. I couldn't afford to do such things having been recently married, buying a house and everything that entails. I had to make a very long distance call to check my facts, we are both now in our 70s but I got there in the end. Thanks for the chat, yet again I've proved your never to old to learn.
@symonjames2657
3 жыл бұрын
Fantastic another video been waiting for the next video from Kevin - keep them coming mate Loving your channel.Have a great Xmas.cheers from Oz.
@hrvojekant9415
3 жыл бұрын
Very nice expained ...Kevin...as always...It is a pleasure listen to You...Regards and Happy Holidays !
@dj_paultuk7052
3 жыл бұрын
My Amp in my home studio is an old Denon PMA 100m. I got it new ex stock a few years back for very cheap. Only 65 watts RMS per channel, but by gee is it loud. The sound feels so powerful and has great clarity. So its definitely not always about more power is better.
@stereoreviewx
3 жыл бұрын
Yeah 65 W is fine for most rooms most speakers
@archiemacdonald553
3 жыл бұрын
Love your videos Kevin ,down to basics ,honest ,interpretation ,merry Christmas from perth scotland. 😊😊😊
@stereoreviewx
3 жыл бұрын
Thanks mate Merry Christmas to you too K
@MrTommygm
3 жыл бұрын
Great Explanation Kelvin, I to was sucked into the big power trap with a massive Yamaha power amp, with the speakers I was using at my normal listening levels the meter's rarely peaked above 5watts. This also did not make them any more enjoyable, needless to say its long gone now & an expensive lesson learned. Which is the favoured amp with the LS 35A you were talking about .
@stereoreviewx
3 жыл бұрын
Are use the Sansui are you 101 amplifier 15 W or the Sansui 331 receiver which I think is only 12 watts . K
@MatijaVabec
3 жыл бұрын
it all started in 80's; cheap plastic, a lot of watts, big numbers, flashy colors.. in 70's you had 50w speakers with 30w amp and you got a powerful system. today people laugh at those numbers but hey.. my philips 457's still sound amazing :)
@hugobloemers4425
3 жыл бұрын
Philips vintage audio is the secret tip (not all products though). Much hated by many but often very good.
@MatijaVabec
3 жыл бұрын
@@hugobloemers4425 I heard that many times, that's why I grabbed them. they are extreeemly musical, not the best by modern standards, far from it, but they sing like a bird in the spring field covered with fresh flowers lol
@snap-off5383
3 жыл бұрын
"Hoffman's Iron Law" "You can have low end extension, high efficiency, or small enclosure size. Pick two." In the 70s they went with the first two, and sold speakers the size of basketballs inside enclosures the size of small dressers or shelves. Later they wanted smaller enclosures to stay competitive in an environment of under-educated customers who were misled by "Bose" small systems simply stating they sound good with enough money behind it. They chose to trade out the efficiency, meaning they HAD to crank up more power to the less efficient speakers.
@axelknutt5065
3 жыл бұрын
@@snap-off5383 I was thinking the same thing as I watch this episode. I recall the first time I heard the tiny Bose speakers - the sound out of those little cubes was amazing - when really cranking but if you want to listen to something mellow, the cones are so tight you miss so much. Give me my floppy basketball size, small dresser type speakers any day .. they can handle the mellow times and pump it when needed.
@jonfoss3437
Ай бұрын
I feel high current is better
@nyccrcsx
3 жыл бұрын
Ah I see you have elac debut 6.2 in walnut I have them too the look is amazing and the sound is even better
@nyccrcsx
3 жыл бұрын
@@sloveloguy I have listened to all 3 and found out the 6,2 and reference sounded about the same to me and unfi 2.0 with good highs but didn’t feel the bass from them so I stuck with 6.2 with the walnut cabinet and plus $300 cheaper than the other two
@nyccrcsx
3 жыл бұрын
@@sloveloguy glad i can help
@deputy3690
3 жыл бұрын
Excellent video!
@renebels7896
2 жыл бұрын
How right you are (as always). Here I am, late in my office at work, alone (no wife/kid=music). My little 15-watt amp driving two Beovox CX50. Plenty of nice sounding volume !
@me_watch_youtube
3 жыл бұрын
I recall Nelson Pass said in relation to his First Watt amp: it's about the quality of the first few watts. And I'm not entirely sure why, but amps with smaller wattage somehow manage to deliver that intimate magic within the confines of those humble watts - something most amps with megawatts fail to achieve; perhaps it's to do with amp design in general? I can't put my finger on it as I'm not a technician but my ears say so.
@stereoreviewx
3 жыл бұрын
Yes I understand what you’re saying and I think you’re right No idea what the technical explanation would be Maybe we’re are just missing a new technical analysis K
@AudioElectronicsChicago
3 жыл бұрын
Well explained! Thank you
@csabakereszturi945
3 жыл бұрын
This is how I like an audiophile teacher sound.
@MichaelBeeny
3 жыл бұрын
A few things many people do not understand. 20watts is NOT twice as loud as 10 watts. Turning the volume pot 50% of it's travel is NOT 50% of the available power. Many BBC monitors, LS35A etc are a nominal 15 ohms impedance, with a 25 watt nominal rating. With most transistor (none valve) amplifiers you will need at least 50 watts output to drive the 15 ohm impedance at 25 watts. As the maximum power of ANY amplifier is approached distortion begins to rise until it clips. So by using a more powerful amplifier under most conditions you will never have peaks that approach or entre clipping, keeping the sound always clean and fatigue free. Many amplifiers made for a nominal 8 ohm speaker do not perform well at 4 ohms, to prevent overheating and keeping costs down they use current limiting on peeks, not good. Always buy 8 ohm speakers and buy an amplifier where the power doubles into 4 ohms. Simply because many 8 ohm speaker may well drop to 4 ohms or less. Such a speaker always sound best with such an amplifier. Don't use a AV amplifier for stereo music, they are all very compromised, small transformers, very under rated heatsinks, really don't like speaker where the impedance drops much below 6 ohms in places, and MANY do!!
@stereoreviewx
3 жыл бұрын
Great info thanks a lot K
@florinmoldovanu
2 жыл бұрын
"Always buy 8 ohm speakers and buy an amplifier where the power doubles into 4 ohms. Simply because many 8 ohm speaker may well drop to 4 ohms or less. " I didn't quite get that. What do you mean by "many 8 ohm speaker may well drop to 4 ohms or less"? Never had the thought that ohm could be variable or change. Also " buy an amplifier where the power doubles into 4 ohms" Don't know if you have the time, but drop a line if you will.
@MichaelBeeny
2 жыл бұрын
@@florinmoldovanu Here is the short version.. If a loudspeakers has a nominal impedance of 8 ohms, that means over a large range of frequency's it will measure 8 ohms but sadly in the real world speakers don't present a constant impedance. Mostly because it is impedance and not resistance. We are also dealing with AC and not DC. The impedance of a loudspeaker can rise up to say 15 ohms at certain frequency's or worse drop to 3 ohms or so. One reason you hear some amplifiers don't like some speakers. If the amplifier will not provide the required power at such low impedances, the results could be, amplifier blows up, power limiting, rise in distortion, and very common, overheating. This is what can and does happen at 8 ohms, imagine if you START at 4 ohms!
@florinmoldovanu
2 жыл бұрын
@@MichaelBeeny got it Michael, thank you!
@florinmoldovanu
2 жыл бұрын
@@MichaelBeeny If I'm correct damping factor is what regulates and controls that variation in impedance right?
@alanshayler941
3 жыл бұрын
Finally someone that understands that a good sensitive speaker with a nice tone with a small power will out weigh a big amp with poor tune and big low sensitive speakers The right power and ability to use it properly is the key
@dougburg3210
3 жыл бұрын
not to mention the price tag on the big power amp.
@stevegreenwood7837
3 жыл бұрын
yeah true, nice review .
@mysparkleunicorn591
3 жыл бұрын
Hi, You mentioned several times you like listening to percussion and the drums in music. I just wanted to recommend Santana’s Caravanserai and Santana 3 for your listening pleasure. Hope you like them. Happy listening! Cheers and thanks for your reviews.
@stereoreviewx
3 жыл бұрын
Yeah good I’m going to try it
@djbobby101
3 жыл бұрын
Thank you for this video.
@jameswalsh2427
Жыл бұрын
So well explained thank you. Greetings from James J in Limerick city Ireland
@paulgee6111
3 жыл бұрын
I heard a quote from an amp designer once.."The first watt is the most important"!
@sean_heisler
3 жыл бұрын
A lot of this is about an amplifiers headroom capability and an amplifiers range of linearity. Often times we only use a handful of watts when listening to our system even at higher volumes. An amplifier’s range of linearity, the range in which its performing cleanly with low distortion, is going to be smaller with a lower watt amp and larger with a higher watt amp. It doesn’t take that many watts to quickly start falling out of the amplifiers linear range. Headroom and the quality of the amplifier when being pushed greatly determines the quality of the sound you get.
@MegaTechnoteacher
3 жыл бұрын
Power is not linear
@sean_heisler
3 жыл бұрын
@@MegaTechnoteacher Sorry, I should have been more clear for those who aren’t as familiar. I’m referring to the linearity of frequency response.
@laurentzduba1298
3 жыл бұрын
Before my listening room got completely soundproofed back in the early 1990s, my neighbor threatened to call the police because my Mullard 3 watt tube amp is way to loud playing through my home-made open baffled speakers.
@dougburg3210
3 жыл бұрын
i'm having trouble believing that one.
@rodplanet5901
3 жыл бұрын
@@dougburg3210 I'd like to know why. Pls enlighten me. Thanks
@dougburg3210
3 жыл бұрын
@@rodplanet5901 with 3 watts, your neighbor must have had their ear to a glass up against your wall to even detect that the stereo was on. do you really feel that you can produce the sound levels and dynamics of a live event? there are speakers with high sensitivity ratings, but not that high. also keep in mind the db drop over distance. using the inverse square law, you would be losing 6db for every doubling of distance from the source. how far away is the neighbor?
@rodplanet5901
3 жыл бұрын
@@dougburg3210 thanks for the infos
@laurentzduba1298
3 жыл бұрын
To everyone concerned and still cares, my DIY speakers used drivers rated at 97 dB per watt at 1 meter. Though the person concerned no longer lived near me and might be already dead given his age at the tme - ptobably mid 60s - he's probably more startled at the sound quality of my rig which made Iron Maiden frontman Bruce Dickinson sound as if he was "screaming in tune" in my room without the aid of any electronic amplification. Too bad nobody makes timbrally accurate recordings of modern assault rifles on CD back then.
@Alberto7tube
3 жыл бұрын
Nice 👍 - hi from Los Ángeles CA 😃🎶🎵🎶🎵
@Modeltrainscarsstereos614
3 жыл бұрын
That’s a big reason I run klipsch speakers super easy to drive I like headroom is the only why I have a 225 wpc integrated amplifier plus when bass heavy tracks are on the amp just breezes. However I would like to own a prima Luna tube integrated amp. I have a sansui model 250 that needs restoring and a 890.
@shannonpattenthetexasbb
3 жыл бұрын
those receivers look real nice back in the day the wood on the top of them
@Modeltrainscarsstereos614
3 жыл бұрын
I know I can run my RF7II on a flea power amplifier but they love some good clean power too.
@paulgee6111
3 жыл бұрын
My everyday listen is an old Cossor valve radio I restored and added a Bluetooth adapter to so I can listen to a majestic one and a half single ended mono valve watts from my phone. Surprisingly loud due to the high efficiency speaker. Very good with old school ska and reggae, bass doesn't go low but it's there and tight, trebles sweet and vocals come over well. Spoken word was slightly unnerving tho cos it sounded like the speaker was in the room. I'd like to get another so I can try to them in stereo. Makes one want to try a stereo valve amp!
@j.t.cooper2963
Жыл бұрын
When it comes to power, it's all about headroom with a high powered amp.
@thepuma2012
3 жыл бұрын
I have small speakers now, 50 cm height barely and a 60 watt amp and it sounds great and really loud in a normal 25 /30 m2 living room. The speakers have a flat frequency output and the amp in nice, clear and detailed. I almost never go halfway the volume, it is really really loud then already.
@noble_wolf
Жыл бұрын
I have a Proton D940 ("only" 40W), and with Celestion Ditton 44s it is more than loud enough ! The volume control rarely goes past "9 o'clock"
@johnnytoobad7785
3 жыл бұрын
It also depends on the speaker "efficiency" and power handling capability. I remember many years ago I upgraded my power-amp from 60w/ch to 200w/ch. The difference was quite remarkable. More recently however, I find that having "distributed" power over several lower power amps yields better results than just using "brute force power" into two cabinets. In today's world..the only speakers than really need serious power are subs of 10 inches or greater. The point is..If you can bi-amp (or tri-amp) your system with multiple medium power (50-100 w/ch) amps...DO IT.
@stereoreviewx
3 жыл бұрын
Thanks for your info Johnny K
@ssgeek4515
3 жыл бұрын
Having now watched your video,if I may comment again. You are correct in saying-high sensitivity is the thing you need for a low power amp but there is still no sacrafice for power. TRY THIS.get a very big Amp 200 and put a 50w speaker on it..then try a 50w Amp.You should here the difference even at low vol.
@stereoreviewx
3 жыл бұрын
Yes I would say the difference I know what you’re saying and in the regard you’re saying that you’re right I would also want to put in the equation to the speaker sound good with that much power does the room work with that much power there is a lot of additional let’s say travel that could come with high power I should say I’m beginning to think and this isn’t a boast but I’m beginning to think I’m some kind of purist I don’t want anything to be not correct in scale or articulacy and the only way to do that is to not have it too loud Appreciate your comments cheers K
@MrFlint51
3 жыл бұрын
I have a background in electronics and audiology. Sound quality is entirely subjective and cannot be analysed scientifically, although it relates to frequency response, distortion and room acoustics. Loudness is a different thing entirely; all speakers have a rating for sensitivity, i.e. how many decibels of sound they produce when fed with one watt and measured at one meter distance. This will probably be in the range of 80 to 90 dB/w@1meter. However, loudness (dB) does not relate arithmetically to power in watts; it varies with 10 times the logarithm, i.e. add 10dB for every 10x power increase. Take a speaker with a sensitivity of 85 dB/w; at 1 watt, sound output is 85dB. At 10 watts it is 95 dB, at 100 watts it is 105dB and at 1000 watts it is 115dB (assuming the speaker can handle that much power). Now consider the effect of distance; loudness drops by 6dB for every doubling of distance, so the speaker with 85dB at 1 meter will give 79dB at 2 meters and 73dB at 4 meters. In stereo, 79 dB from two speakers will give a total of 83dB. Listening to more than 85 dB for prolonged periods is likely to cause permanent hearing loss; at this level , and for a 40 hour week, employers must provide ear defenders to workers. The safe limit drops by half for every 3 dB above this, so at 94 dB hearing loss is likely with exposure of 5 hours a day
@florinmoldovanu
2 жыл бұрын
very informative and makes a lot of sense. Thanks you!
@subramanianvenkatesh8838
3 ай бұрын
By my hearing experience going more watts tonality and sounds are fine tuned. Go always min 100 watts for better clarity
@markielinhart
3 жыл бұрын
Great video Kelvin. Question from the floor, what about impedance and its effect on sound quality? 🇦🇺🌹
@MichaelBeeny
3 жыл бұрын
See my comments above.
@chuckmaddison2924
2 ай бұрын
A couple of thousand watts and 2 massive plates full of Motorola piezoelectric tweeters and a few bass cabinets works well in a night club. But not at home.
@marcredford6475
2 жыл бұрын
Kelvin, loving your videos, very informative! Just wondering if my Sansui AU101 would be able to drive and sound ok on some B&W 602’s?
@christopherward5065
3 жыл бұрын
Most of the time it’s the first ten watts that are needed for music playback. Beyond that it’s the quality of the watts. Good quality and transparency are a must. Two amplifiers of the same design and different power output will differ because of headroom. We get into trouble on peaks more of the time with a low powered amplifier than a high powered one. The more powerful one will deliver more current and move the drive units more precisely. Sensitive speakers will keep the low powered amplifier out of trouble more of the time and give a similar effect to the high powered amplifier with average to low sensitivity speakers. Powerful amplifiers also give more useable bandwidth to the speakers. Matching the amplifier to your speakers by listening is therefore a must. The amplifiers that can track transients accurately with the speakers you have chosen in the room you are using will get you the possibility of good sound.
@stereoreviewx
3 жыл бұрын
Good info thanks Chris K
@ramonborreguero7765
3 жыл бұрын
Very interesting. I am measuring the place for music and will tell you about.
@garethparr9482
3 жыл бұрын
Power in reserve is great to have but most of the time you don’t need lots of power and as you say it’s all relevant to how big your room is
@chrisclose7793
Жыл бұрын
one thing i found is with my B&W dm602s when i had my old naim nait5i my naim was rated 50 watts but it powered my 602s nicely but when you got to about 10 oclock on the dial it sort of sounded the amp was running out of puff but i then switched to a yamaha ax396 it seemed my dm602s just got more livlier to listen to and more energised
@r423sdex
3 жыл бұрын
Sherlock Holmes, he needed plenty of watts.
@ruk2023--
3 жыл бұрын
Taxi for Dave G.
@robertkeefer1552
3 жыл бұрын
Dr. Wattson, quick, the amplifier game is afoot!!
@gordthor5351
Жыл бұрын
Do you realize that you can put the port plugs in the LS50s and get super tight bass in a smaller room with 15 watts. Am I the only person who get port plugs with LS 50s? Do you think KEF hasn't improved on their drivers, cabinets and technology over 40 years? Kef tunes their speakers in an anechoic chamber. Your Rogers speaker have old Kef drivers and if those more simplistic (cheaper to make) drivers sounded better in the LS50s, then they would have used them. You can't treat the LS50s like vintage speakers and just plop them down on resonating surfaces and expect them to sound good. Inert boxes are great for sound quality, but only if you decouple the resonate energy (it has to go somewhere when it isn't resonating through the boxes like 99% of speaker do) from anything touching the cabinets. You like the same things as me, sweet natural sounding midrange, very tight bass and space between everything where nothing is muddled together. The LS50 do all of it in spades, but only if set up properly. Everything need to sound right for me to enjoy music and that is why I spent a lot of time figuring out the LS50s. I plug all of the ports on my speaker because I know sealed boxes have much better bass. You haven't even tried plugging the ports on the LS50s, yet you claim the bass not tight, over powers the vocals and is "one note". No shit, all ported speakers sound like that to me and that is why I plug the ports first and foremost. I'm not trying to criticize you. I just know that the LS50s can't be treated like vintage speakers and expect them to sound good. The LS50s are a totally different design. I don't think you gave them a fair test where they can shine. Do you test the LS50s on proper stands that will decouple the resonant energy that can't dissipate through the inert box? Or do you just toss them on a wooden table that will resonant like the worlds most boomy subwoofer? It would be a waste of time decoupling most vintage boxes, because they resonate through the flimsy boxes, thus there isn't much resonant energy left to dissipate. It's a must for the inert boxes like the LS50s. The LS50s are not "overrated". They are grossly misunderstood by many people.
@stereoreviewx
Жыл бұрын
Yes this point about improvements over time is perplexing because you would imagine things should improve there is so much evidence that things don’t improve One explanation is it’s all done on my computer put simply I mean the LS358 dates to 1971 I think it’s still highly revered and I would agree with that why they can’t replicate that or just improve on it is a mystery to me On the Bassport subject I would say the circuitry is built for the port so put in a plug in the port surely will upset the designed crossover not that I’m against tweaking because you can always try things and sometimes they work great for your system and your room You’re clearly passionate Have done the work so I respect that
@gordthor5351
Жыл бұрын
@@stereoreviewx "On the Bassport subject I would say the circuitry is built for the port so put in a plug in the port surely will upset the designed crossover." On the contrary Kelvin, according to Kef. All of my Kef speakers came with a picture diagramed showing the port open with a big red X in the check box and a graph showing a big bass spike caused by the port. The diagram with the port plugs in gives a big green check mark in the box and flat frequency response graph beside it. Kef cares about tight accurate bass. Thus why they give port plugs and picture diagrams with their speakers. People of any language could easily understand that the big green checkmark (plugged ports) was how the speakers were designed to be used to sound best. I have a boat load of of speakers and they all sound better with the ports plugged. Kef at least gives me the fitted plugs so I don't have to make them. Most people are bass freaks who want bloated "one note" bass. Thus most speakers have added ports. You don't have to use the ports though. If you care about natural sound.
@sretenmladenovic
3 жыл бұрын
Really good video lot of information that are very true. I watched his review of DM4 and started watching other videos, they are very accurate, overall a good tips specially for new people coming into hi-fi world. What is important is that everything he said is true. I assume he has lot of experience with hifi so he like to share it with wider public. Amazing videos and way you are approaching to explain some components, I realy like it.
@stereoreviewx
3 жыл бұрын
Thank you K
@andrewfox1446
2 жыл бұрын
I have have an amplifier rated at 15 Watts per channel and I also have some very old 1970 goodmans speakers rated at 4 ohms but they have a very good sensitivity level 93 DB So you can see there are two things happening here when a speaker is 4 ohms it normally takes more driving but normally can give you more volume when a speaker is a higher sensitivity that's also give you more volume normally it is people buying stuff that either looks good but doesn't sound compatible I always advise people to go and buy speakers with the highest sensitivity they can actually get and also the sound has to be right above the biggest powerful amplifier normally the speakers are the most reliable part of the system anyway if you spend most of your money on your speakers they can actually last you a lifetime if driven properly instead of under driven a speaker likes to be driven I suppose it's like a human getting no exercise at all you will end up in hospital 💪💪🤗🤗
@snap-off5383
3 жыл бұрын
The relationship between speaker efficiency, low end extension (freq response, particularly bass frequencies), and speaker/enclosure size is summed up by "Hoffman's Iron Law": You can have great frequency response, low power usage, or small speaker box size. . . . *pick any two*. Obviously they're not going to leave out great frequency response, so the variables are speaker size and power consumption.
@rationalmartian
3 жыл бұрын
Yes. That is definitely one of the major trade offs. But then speakers are inherently a ruddy great boatload of trade offs. Quality, strong, stiff, dead and aesthetically pleasing cabinets cost, and it's times two. It also scales badly for the wallet. Not too great for transport either. With the advent of reasonably priced transistor based amplification, speakers were inevitably going to get smaller. But now with all this experience under the belt, it becomes easier to make the best compromises and get bloody fabulous sound, for even reasonable amounts of cash. Especially if one is extra canny and researches thoroughly. Though I still prefer a slimmish floorstander as the best compromise. BTW. Class D is now becoming very interesting too in the past few years. It is looking like there have been some breakthroughs that have thrown up some bloody impressive amps.
@FirebrandVOCALS
3 жыл бұрын
Wattts the Matter? ⚡️⚡️
@agx502
3 жыл бұрын
Modern loudspeakers trade off sensitivity for bass extension, so this allows for domestically friendly standmounts with reasonable bass extension.
@stereoreviewx
3 жыл бұрын
Good point that seems true
@msgillingham
3 жыл бұрын
Great video again, i have a Sansui 441 receiver which has taken pride of place amongst my other Amps and sounds beautiful through my three way open baffles, delivers a rich and open sound especially with vinyl. No matter whether i use the open baffles, Mordaunt Short Ms400 and one off the hifi bargains of all time, a mint pair of JPW Sonatas, the little Sansui Delivers. Kelvin your approach concerning HIFI is a breathe of fresh air. Keep the Vids coming.
@stereoreviewx
3 жыл бұрын
Thanks Anthony’ I Appreciate that there is a terrible lot of nonsense spoken out there KZitem and magazines Cheers K
@msgillingham
3 жыл бұрын
@@stereoreviewx Quite right Kelvin. in my spare time i set up Turntables and systems for friends and trying to explain to them that a good set up and platform is essential for optimum results with turntables is a must and not to listen to the nonsense on youtube etc etc is hard going but when they hear the results it makes my day. Kelvin I'm going to give you a turntable recommendation if you ever see a Sony PS-X600 Biotrace turntable for sale buy it. In my humble opinion its better than my Ariston RD11S and STd 305M turntables, and is happy playing high quality moving coil Cartridges in fact it can accommodate almost any cartridge whether it be MM/MC. Regards Anthony.
@robertballard8833
Жыл бұрын
if you have a low powered system, say a Marantz 15 watt unit, use efficient speakers, Tha tbeing said, I have driven my BIG Cerwin Vega VS 120s ( 3 way, 12 in woofer) fine with 25 wpc. You have to be careful NOT to over drive the amp and damage it. IF you need more bass in a small wattage system, consider a decent quality powered sub woofer.
@adaboy4z
11 ай бұрын
The only speakers I owned that needed big power were Kefs Q150.
@bartvanransbeeck1341
3 жыл бұрын
True , if you can find go for a electro companiet ,their first amp 25watts classA....amazing it blewe away the sansui 100watts , it was like the sansui distorted aswell mc intosh integrated ,i could hear lots of distortion in comparison of the companiet of Mati Otala...
@keithbickerdike4621
3 жыл бұрын
The old 25 watts is probably equivalent to a modern 100 watt ... The other day I bought some B&W DM 601 for £20.00 yes 20 quid and they are in mint condition...
@stereoreviewx
3 жыл бұрын
Nice
@michaelb9664
3 жыл бұрын
Not all watts are measured equally. It’s no good having a 150W amplifier which is measured at 150W peak output at 10% THD at 1KHZ at 2 ohms. 150W RMS at 000.9% THD at 20hz - 20khz at 8 ohms would be much more favourable and actually is a true measurement. Also let’s not forget that a 200W amp is only 3 db louder than a 100W amp. A 100W amp is only 3 db louder than a 50W amp. Once we do the calculations based on speaker sensitivity and room size in relation to the volume output required usually a loud volume is achieved worth only 0.5 - 1 Watts of amplifier power. Big power is all about trying to look impressive, but you’ve got to look at how those Watts were measured and be realistic about what is needed in a domestic environment. Volume dial positioning in relation to volume is more about pre amp sensitivity than power output. Most amps will reach 100% power at 1 o’clock on the dial. Again it looks impressive for the reasons stated in this video.
@kundeneun4055
3 жыл бұрын
Yes, i have rogers ls3/5a and Accuphase E-650, 30 Watt is more than enough :)
@petrileskinen4299
3 жыл бұрын
Watts really matter at least with Magnepan speakers. Or should i say current. I have two Nad 214 amps in mono producing 500 watts of power in 4 ohms. I would say that is suitable for Magnepans.
@housepumpinpc3983
3 жыл бұрын
Yep. Magnepans need juice. And more is good.
@g3rraldo
3 жыл бұрын
Watts in Amplifiers is one of most misunderstood value. If an Amp with 50W has a volume of 100%, you need one with 500W to have a volume of 200%! (So an Amp with 95W will only be 110%...). Another factor is very important too - the power supply! The better it is, the more power the Amp will have, when it's needed (bass). So weight can be an important thing, when buying an Amp. Better buy the 10kg Amp with 50W, then the 5kg one with 100W... ;)
@charlesscottkelly
Жыл бұрын
Love your stuff
@patrickmeylemans9627
3 жыл бұрын
I have a quite large room 7m x 6m and using large speakers, the VU on the amp is indicating < 1 watt. When playing very loud < 3 watt. Sensitivity speakers are 89dB... never understood the power rush, look at first watt amplifiers....
@mattycfox
Жыл бұрын
Great information sir - so based on my 18 x 25-foot room I'm looking to connect a Marantz Model 1090 Amplifier with a pair of B&W DM2 Mk2 Speakers and a Thorens TD160 turntable. what are your thoughts, please? I'm not getting you to do my setup for me, I just wanted to pick your large audio brain. Best
@stevezeidman7224
3 жыл бұрын
Kelvin, great video. Keep them coming! I like all amps of all power levels. I’ve got a few low powered receivers and a few high powered amps. I agree, Sensitivity is the key I think. I’ve got one system with a Sansui 5000 from 1970 55W and original Large Advents. Those speakers aren’t efficient but I don’t know what they were rated. They have a 12” sealed woofer (no ports) and need those 55W for the bass to come alive. When it does, it’s amazing. I have another setup with a Sherwood 7100-a 12W also 1970. It’s pushing moderately efficient 88db Wharfedale Diamond 230 and they sound great.
@jerrycalderon7930
3 жыл бұрын
I had a Sanusi 5000A purchased in 70. Thought it was rated at 180 wpc? Am I wrong about that?
@stevezeidman7224
3 жыл бұрын
I’m the second owner so I don’t know definitely but I found this at classicreceivers.com.... Here we have the Sansui 5000x receiver. It was produced in the early 70’s and was a very popular unit. It puts out 55 watts per channel and weighs in at around 40 pounds.... This one has no x designation it’s just a 5000 so this might not be totally accurate.
@Sunrayman123
2 жыл бұрын
@@stevezeidman7224 My older brother ran a Sansui 500X with Klipsch Cornwalls in our large basement and I was BLOWN AWAY with stereo...😃
@greymurdock2
3 жыл бұрын
Some of my favorite moments with my hifi our like my favorite moments with the wife, alone and quite in the dark.
@Sunrayman123
2 жыл бұрын
😂
@banginghats2
Жыл бұрын
I've always thought the ability to deliver lots of current, especially fast current, with a very low output impedance, is more important than the wattage. I'd rather have a low wattage amp designed like that than an amp that was a lot more powerful on paper that couldn't deliver current as well.
@stereoreviewx
Жыл бұрын
Sounds good to me
@markcarrington8565
3 жыл бұрын
Nice video as usual, Kelvin, thanks. I see you didn't fall in to the trap of talking about "British" watts v "Japanese" watts 😅 This was a phenomenon first demonstrated by the likes of Naim and really driven home by the famous NAD 3020 which arrived on the scene in 1980 with a gut busting 20wpc. Plenty of amps had high watts RMS into 8 ohm loads but couldn't handle anything except highly efficient speakers. As soon as the impedance dipped down to 4 ohms they lost their mojo. I think the grip the amp has over the speakers has far more impact on the sound quality and in class A and AB amps this means oversized power transformers and smoothing caps, capable of delivering big dollops of current to give transients all the impact you could want. The sound from my main system improved dramatically when I went from a 75wpc amp to a 150wpc amp from the same company. It was nothing to do with the volume, I hasten to add. It had everything to do with the ability of the amp to keep tighter control on the speakers.
@Tom-yd5lg
Жыл бұрын
Very interesting Video, I bought a Yamaha CR-420 in great mint condition, it has 2x30 Watt. My Room is 5x4meters, can you commend me some good vintage Speakers for the Yamaha ? Thanks Tom
@SGhiacy
2 жыл бұрын
hi, my av sony k990 manual says, it is a 90 watts per channel av and it gives up to 140 watts per speaker. what is the difference of per channel and per speaker?
@stereoreviewx
2 жыл бұрын
Mystery to me
@rhalfik
3 жыл бұрын
Music has a crest factor. The better the recording, the higher the crest factor. If you like audiophile recordings, than you'll benefit from more power. If you listen at, say 0.5Wrms stereo to a high quality recording with a CF of 20dB, than you need 0.5W* 2speakers*10^2=_100W_ or 2x50W of linear power to reproduce those transients accurately. One reason this may be unnoticed is because microphones compress peaks in bass region, which would otherwise eat up majority of the power. Regardless, most of us just get away with some compression and loss of dynamics. The ones that value dynamics listen to horns anyway. John Meyer has a good research on this. Check out his AES talk on M-noise,
@stereoreviewx
3 жыл бұрын
Yes my friend I will Check out John Mayer research
@Anand.Asrani
3 жыл бұрын
Wise Words ...Thanks !
@gdwlaw5549
2 жыл бұрын
We all need something really important: a loudness button!!!!!!
@stereoreviewx
2 жыл бұрын
Yes I use it too specially late at night I mean is compensation for shortfalls in the human ear So nothing to be mocked at all
@RanTausi
Ай бұрын
I prefer the 200W clean of juice my ADCOM GFA 555MK2 deliver.
@thomasward00
3 жыл бұрын
Just received a Cambridge Audio AXA 25 for christmas, that is 25WPC and it is VERY loud.
@jimeagle6636
3 жыл бұрын
Daniel Craig with another good video.
@PrezidentHughes
Жыл бұрын
Are there any examples of speakers that measure near perfect but don't sound good?
@xprcloud
2 жыл бұрын
How much is twice as aloud? in power? twice as loud of 1 watt is 10 watts(approx.), twice as loud as 10 watts is 100 watts(approx), twice as loud as 100 watts is 1KW, In addition, music is not a sine wave, (RMS power), so your average 1 watt listening level can have short millisecond peaks at +10db or 10 watts, and as a rule of thumb, to be 100% certain there is no clipping, you need +20db of headroom, so an assured distortion free 1watt average, requires a 100watt amp. remember, a 90db efficient floor stander will play twice as loud vs a low efficiency 80db bookshelf, so the bookshelf will need 10watts to sound as loud as the floor stander at 1 watt, and will produce more distortion, now twice the power ( 1 watt VS 2 watts ) is 3db.
@goonluv
Жыл бұрын
Hi can you please explain what a pre amp is and why you need it cheers. Ijust use a old 90s sony amp. Fantastic sound with plenty punch on my kef coda 8 s
@christopherhines2718
3 жыл бұрын
I dont get this ls3/5a rated at 25 watts its ok to put 100 watts in,but if you turn it up too high it makes a kind of a quack sound,no sorry this is not right,if your your speaker makes a quack sound,you just burned the voice coils,and you need a new bass driver.
@jonfoss3437
Ай бұрын
Speaker to amp.matching is key
@djvartan
3 жыл бұрын
One word Headroom.
@hugobloemers4425
3 жыл бұрын
Be ware, one word is one dimensional, there is more to the story.
@Bubba_fett
3 жыл бұрын
I learned watts a little different. Not only from audiophiles but electronics people. Back in the day, I had two amps monobloc at 500wpc. It wasn't that is got loud, any amp will get loud, its about control of the drivers through spikes like a snare pop, or canons on the 1812. A small amp can't power through those dynamics and your speakers will suffer heat fatigue because of it. I think one of the most important things you can do to improve your sound is to have your speakers, (drivers) crossed over at the proper frequency, which may require you to modify or create your own. Back in the day, I modified some Advent 6003 by removing the tweeter and mid and making a cabinet just for them. and hung them on the wall above the bass (original) cabinet. I also added another 1" dome tweeter and wired them in 16 ohm array. I then sealed the bass (original) cabinet air tight. Quite literally the best sound I've ever had in my home.
Пікірлер: 309