Thanks for making this easy to follow along. I was quoted $1300 just for the replacement and figured now would be a good time to do it myself. Wish me luck
@jeremysanderson8677
10 күн бұрын
Tell me how it went
@scottcpan68
Жыл бұрын
Great video. I'm working on a 2014 Durango but couldn't find many videos explaining the intake manifold removal. The Durango has almost the same exact set-up. Thanks
@hyr0llr
Жыл бұрын
No problem. Yeah i know the feels on that. Hope your repair goes smooth.
@reynaldomeade4797
16 күн бұрын
Blessings and great Video definitely needed this I have a code P0203 fuel injection 3 and P0303 cylinder misfire, I put in the new spark plug and coil but, same codes will change fuel injector 3 and pray and hope that fixes the problem, I did put some fuel injectors cleaner and that stop some of the rough idling and was running ok but still not a lot of acceleration, so here I go back at again doing homework lol 😂, just have to make sure that I locate fuel injector 3, any comments or help will be greatly appreciated thank you much and God Bless
@OneFunBooBoo
Жыл бұрын
You’re an absolute legend thank you so much.
@hyr0llr
Жыл бұрын
Thanks for the feedback. Goodluck on your repair.
@jstsayit9434
7 ай бұрын
You just saved me $700, thank you
@hyr0llr
7 ай бұрын
Awesome to hear! Thank you.
@swood248
Ай бұрын
Hi I have a code 302 on my 3.6 durango I changed plugs and coil packs code p302 came back on is it possible it's a injector??
@jstsayit9434
Ай бұрын
@@swood248 yes I’m not sure what code reader you have but I think it will tell you which one needs replacing. It’s not hard to do and the injectors are pretty affordable. Just make sure u have towels to catch the fuel that might spill out and be careful with the clip on the fuel injector harnesses
@carbon_sxt
Жыл бұрын
You made it look so easy haha I’m having trouble getting the fuel injector harness off
@hyr0llr
Жыл бұрын
I just put in the clip where it came off. I struggled with it also. Lol but that would have been a few minutes of struggling added to the video
@hyr0llr
Жыл бұрын
Also at 3:49. What im doing is with my index finger pushing down on the plug at the same time pulling up on the orange tab. This way im not pulling on the orange tab against the locking piece.
@carbon_sxt
Жыл бұрын
@@hyr0llr yeah man I just figured it out you have to push on the little black tab after pullin up the red tab up on the injector very much appreciated 👍
@25sumpter
8 ай бұрын
Thank you stranger! This was becoming very damn frustrating to get those out. @carbon_sxt
@wolfblazer9968
Жыл бұрын
Thank you for this video. I looked everywhere for one forbthe caravan. Same moter so very helpful
@hyr0llr
Жыл бұрын
Thank you very much for the feedback. good luck on your repair.
@robertmedina6875
Жыл бұрын
Hey you did a good job on this video man thank you!
@user-fk1pu5bg5p
Жыл бұрын
Please tell me, after replacing all 6 fuel injectors, the car started to start badly, mostly it happens when the car is hot, who has encountered it? Dodge Challenger 3.6
@diegogzz148
Жыл бұрын
Did you make sure that the fuel injectors fit on the engine? If yes, did you torque down all of the bolts? I missed a bolt but it ran fine after. Did you check the spark plugs?
@randyblunt8967
Жыл бұрын
Hello did you find out the problem? I am having same problem now, researching I found out that fuel filter location is in fuel tank maybe this could be it? I am dropping mine today as well as six injectors
@mattg2369
6 ай бұрын
If it was running fine before then got fucked up after definitely was sm with the injectors
@desmondcoleman1409
2 ай бұрын
So i changed all my spark and coils and gaskets on my challenger 3.6 yet cylinder 3 and 6 repeated misfire i talked to a guy that said maybe my injectors are the issue
@Spartan_130
Жыл бұрын
Driver's side injector plug is not as easy. Totally different plug release and facing back towards fire wall (atleast on 2012 wrangler)
@yoboyking1716
Жыл бұрын
what would i do if the orange tab on the fuel injector broke and wont come up
@LUNAH4
Жыл бұрын
Having the same problem. Did you find a fix?
@davidp1913
5 ай бұрын
I’ve got a 2012 dodge charger 3.6 L pursuit having troubles getting it to start. It will start, but it takes quite a bit Turning the key on and off and cranking it to get it to start and then when I’m driving down the road if I try to accelerate fast it spits and sputters and pops I’ve replaced spark plugs, fuel pumps, alternator, and crankshaft position sensor all in one day I looked at the coils and they looked fine. No arc marks. But I’m stomped on what to do
@hyr0llr
5 ай бұрын
No CEL?
@davidp1913
5 ай бұрын
It’s throwing a code po171 bank1 to lean. and code po174 fuel system to lean Code p2066 fuel level sensor
@hyr0llr
5 ай бұрын
@@davidp1913 sounds possibly like a bad map sensor or o2 sensor. But sounds like you have already thrown a bunch of money at it already. I would have a shop diagnose the problem for a peace of mind.
@BWeezy-sw1wy
2 жыл бұрын
I’m guessing this was an Open circuit in the fuel injector… Conversely would an open code inhibit the mis fire code from setting? I was looking around for an injector balance test method to run at home. I only have a simple AutelMax Pro scanner right now and a P0302 lingering here and there after changing the spark plug and coil. Seemed to set right away when ambient temp was 95F.
@ericsilva5285
Жыл бұрын
Whatsup bro, I did this.. replaced all spark plugs, all ignition coils, and the fuel injector for the cylinder that was misfiring (p0301).. had to jump it to restart it, the code was then cleared... no check engine light.. But after about 50 miles of driving.. (smooth by the way), the code reappeared... idk what do you think it could be??
@hyr0llr
Жыл бұрын
Sounds like you replaced everything already. The coil packs and injectors are good quality parts?
@romelrodriguez9998
4 ай бұрын
Might be another fuel injector. It’s always good to change them all at once to avoid random issues again
@codyhansford2349
Жыл бұрын
you're amazing
@Fabian.chavez1
11 ай бұрын
I am hoping this is my problem, I can feel the engine shaking from inside the car, spark plugs were replaced and swapped out coil to to another cylinder but scanner still shows as cylinder 1 misfire
@hyr0llr
11 ай бұрын
Let me know how it goes and to see if it fixed your problem
@Fabian.chavez1
11 ай бұрын
@@hyr0llr will do! Ordered the fuel injector online since it’s literally half the price lol
@jacobking3694
8 ай бұрын
@@Fabian.chavez1how did it go?
@Fabian.chavez1
8 ай бұрын
@@jacobking3694 good! My car still misfired afterwards, it turns out fuel injectors must have been dirty/clogged with ethanol, I started to use premium gas and after a couple of tank cycles, check engine light came off and my car stopped shaking, runs very smooth again!
@tundrawhisperer4821
Жыл бұрын
Last time I was in to have my oil changed in my 2018 Daytona 392, my Dodge dealer said to think about having a fuel injector service performed the next time I’m in. How often does a car need this service. Mine only has 47,000 miles on it and performance still feels great in the car. Just not sure if this service is really necessary right now. Thx for any info you could provide.
@hyr0llr
Жыл бұрын
It was probably a preventative maintence service. As in your car wont run like crap out of no where, but to be ahead of any problems you can do the service. Orrrr its a money grab lol. But if they legit do the service, it can delay any injector problems way down the timeline.
@tundrawhisperer4821
Жыл бұрын
@@hyr0llr Okay, It’s probably the first idea, preventive maintenance, but does $350 sound reasonable for a service like this? It’s through a legit Dodge dealer, just down the road from me. Do they actually replace them or just “clean” them? The Car has always performed really well, starts up strong each time. Fuel mileage has been right on par since I’ve owned. That Hemi motor is an awesome engine, and I do what to take care of it, if it’s truly needed. Just trying to get educated a bit about these things. Thx you!
@hyr0llr
Жыл бұрын
@@tundrawhisperer4821 350 doesnt sound too bad. And it would be cleaning. If they were replacing, that price would go way up lol if your car is running fine, i wouldnt worry too much.
@tundrawhisperer4821
Жыл бұрын
Okay, sounds good. And now I know some of the signs to look for if performance starts to change. Thank You!
@mikert3724
Жыл бұрын
Is the procedure the same with the R/T’s ?? I have a 2022 but i have been getting really low gas mileage i used to get 19 on the city and now im getting 14 and i promise ya’ll im not stepping on the gas like crazy i drive chill since i always have my newborn with me, but idk whats going on. It all happened after an accident i had like 6 months ago.
@hyr0llr
Жыл бұрын
I just so happened to be working on my buddies R/T this morning cuz a rat chewed his injector plug, and it looks alot easier on the v8s
@tyronedavis3881
Жыл бұрын
I appreciate it very much
@hyr0llr
Жыл бұрын
No problem. Hope your repair goes smooth
@mymillenia2001
Жыл бұрын
I’m having a really hard time getting the rail back on I’m afraid I already broke it because it’s refusing to go back on I have everything aligned this has me stressed out because I have to get to work tomorrow
@hyr0llr
Жыл бұрын
do you have any silicon lubricant to slide the injectors back in
@mymillenia2001
Жыл бұрын
@@hyr0llr no and I have no way to get any
@hyr0llr
Жыл бұрын
@@mymillenia2001 in an emergency use either the lube from engine oil dipstick or some pentrating oil
@joelrojas8256
Жыл бұрын
Hello, i unplugged the connector from the injector and the connector was wet with fluid and is all stained yellow. Haven't tested the connector but would it more than likely need to be replaced ?
@hyr0llr
Жыл бұрын
Does it look like fuel is bypassing the injector? There shouldnt be any fluid there lol. Make sure theres no corrosion on the injector side
@joelrojas8256
Жыл бұрын
@hyr0llr it does seem like that. The whole injector is covered with gunk, and I'm not sure if it's oil or gas. When I disconnected the connector, it was stained yellow, and the female input of the injector looked like it had gas inside. Just wasn't too sure how that happened. I was doing an oil filter housing replacement cause the housing failed when i noticed the injector. The car also has a flashing check engine, but I haven't retrieved the codes due to no scan tool aha
@hyr0llr
Жыл бұрын
@@joelrojas8256 oh yeah. I forgot that these motor are known for the oil housings to leak. I would check the code and see if there is a misfire. Does the motor stutter at all?
@joelrojas8256
Жыл бұрын
@@hyr0llr yes the motor has a rough idle to it. I appreciate your responses 🙏
@hyr0llr
Жыл бұрын
@@joelrojas8256 yeah its likely the culprit. I would try a new connector if the one on it is corroded.
@jameshau7408
7 ай бұрын
So I got one on the number 6 cylinder. With the intake manifold covering the fuel rail what’s a good way to check for a leak? Also, mines currently idling at 500 as well but I’m not getting flagged for an injector, could this drop in rpm be an indicator or an injector?
@hyr0llr
7 ай бұрын
you have a code for cylinder 6? but not a code saying the injector itself?
@jameshau7408
7 ай бұрын
@@hyr0llr correct. Long term fuel trim on bank 2 is at 11.7% if that’s important as well
@hyr0llr
7 ай бұрын
@@jameshau7408 ands its only isolated to that one cylinder? seems like it would be an injector issue. if it was a whole bank then it could be anything from an 02 sensor to a vacuum leak.
@jameshau7408
7 ай бұрын
@@hyr0llr ya only cylinder 6 and it only comes up after it’s been idling after about 10 minutes
@hyr0llr
7 ай бұрын
@@jameshau7408 if you have the luxury of time, you can play swap the injector and see if the problem follows lol
@25sumpter
8 ай бұрын
My fuel injectors did not just pop out they seem stuck i cant get a single one out!
@hyr0llr
8 ай бұрын
Even with trying to twist them?
@25sumpter
8 ай бұрын
@hyr0llr i finally got them out
@hyr0llr
8 ай бұрын
@@25sumpter good stuff.
@25sumpter
8 ай бұрын
@hyr0llr one of the orange tabs broke on one and now I can't get it out? Is there any work around?
@hyr0llr
8 ай бұрын
@@25sumpter i didnt break any , so i dont have experience on how to to remove them. So i would just work at it with a small screwdriver or pic.
@Randem1320
Жыл бұрын
Im having a hard time putting the intake manifold back on
@hyr0llr
Жыл бұрын
make sure your not getting hung up on any brackets or hoses and you should be good.
@Randem1320
Жыл бұрын
Thank you so much got it!
@hyr0llr
Жыл бұрын
@@Randem1320 great to hear. Only took a month not bad lol just playing
@deewashington3572
Жыл бұрын
I Can not get the wiring harness for the bracket off
@hyr0llr
Жыл бұрын
are you using a pry bar or screwdriver?
@hyr0llr
Жыл бұрын
you can try a tool like this from harbor freight www.harborfreight.com/panel-clip-pliers-63699.html?campaignid=17890471891&adsetid=146321487344&product=63699&store=450&gclid=CjwKCAiAkfucBhBBEiwAFjbkr02WcQvUuFuGFH8-q7vbYbNUe8HzDzccBB7O3cCUCS1o5v0Gv1LimRoCBs0QAvD_BwE
@hyr0llr
Жыл бұрын
or this type from the parts store. I personally use this one. www.napaonline.com/en/p/BK_7769160?cid=paidsearch_shopping_dcoe_google&campaign=GSC-Paint-Body-Equipment&campaign_id=10947560788&adgroup_id=110533803034&adtype=pla_with_promotion&gclid=CjwKCAiAkfucBhBBEiwAFjbkrypoy0JOer0-0JZsyNg1RCLRYifLo3W-ak7HGl4QfV09R86KdpvWVRoC_SYQAvD_BwE&gclsrc=aw.ds&
@deewashington3572
Жыл бұрын
@@hyr0llr screw driver
@shanevanorder2644
Жыл бұрын
Did you use a mopar replacement injector?
@hyr0llr
Жыл бұрын
I dont remember off the top of my head. I believe the owner just bought an autopart store one
@captainhookoverlnd
2 жыл бұрын
Did intake have to come off for the number one replacement? Looks like you can access the fuel rail bolts but probably not. Nothing is easy anymore
@hyr0llr
2 жыл бұрын
yes. this video is for the number one fuel injector
@hyr0llr
2 жыл бұрын
youll probably be able to pull the screws out. but lifting the rail up and out is unlikely
@hyr0llr
2 жыл бұрын
if you are able to do it without removing the manifold. let me know.
@jonathankeffer3689
Жыл бұрын
@@hyr0llr Just changed fuel injector 5 on my 2018 1500 with the 3.6L. You can access the fuel rail for injector 1,3, & 5. Little finesse involved getting the tubes and electrical out of the way but not too hard. However, I Let it die with the pump off and took the fuel rail off and took a gasoline shower lol. I think I needed to cycle it an extra time or two after it died to take any excess pressure out. But thank you for the video. Trying to get more savvy with my vehicle for minor repairs and this was a big help 👍
@jonathankeffer3689
Жыл бұрын
@@hyr0llr Oh one factor I switched out the air intake previously so I do have more access to everything than the factory air filter. So for the tru ck I'm not sure if you would have to disconnect the air intake to get the fuel rail.
@spidercan63
Жыл бұрын
Go through all that hard work to replace one injector??????
@hyr0llr
Жыл бұрын
Yes
@AIRSOFT24503
Жыл бұрын
what (size) torque wrench do I need for the intake?
@hyr0llr
Жыл бұрын
A small one. A 1/4" one that goes by inch pounds.
@AIRSOFT24503
Жыл бұрын
@@hyr0llr thank you!
@weldingjunkie
Жыл бұрын
no injector coding?
@dominiccunningham8245
Жыл бұрын
What size is the stock injectors ?
@hyr0llr
Жыл бұрын
I have no idea. Sorry
@robertbowers5330
Жыл бұрын
My dealer told me I would need to flash the pcm or basically code the new injectors after doing this. How could I do that ?
@hyr0llr
Жыл бұрын
if you do the replacement yourself, i guess you can tow it to the dealership to have them flash it.
@robertbowers5330
Жыл бұрын
So tow plus cost parts costs = might as well pay someone else
@hyr0llr
Жыл бұрын
@@robertbowers5330 if thats your best route then yeah. If the dealer/shop does it then youd know its all done legit.
@gabrielrodriguez-wj9ro
Жыл бұрын
🙏🫡🫡
@shameelshemi8057
Жыл бұрын
Dodge is scrap 😢
@rockfordhx2768
Жыл бұрын
What are the signs of a bad injector on the 3.6
@hyr0llr
Жыл бұрын
Car stuttering and a check engine light fpr a misfire on specific cylinder
Пікірлер: 113