What Doepfer module tutorial next? (see description for list)
@thomas854
Жыл бұрын
If your are into Techno, the A-143-1 is the perfect module to get your sequences "off the grid"
@Detroit-Berlin
Жыл бұрын
that’s true and I use this module for this purpose most of the time
@richarquis
25 күн бұрын
Hey, great demo, I'm gonna look deeper into this one. I hate nano modules, I don't like anything less than 4hp. As my rack grows, I just add cases, and go with larger modules most of the time. So, 28hp is no problem for me, I have space for it. In fact, its the exact fit for replacing my drum module (Erica LXR) from the front row of my controller case, so I can put LXR back in the drum case and stick a whole bunch of utilities between controller/drums and synth cases. My controller row, at front and bottom, is only modules with jacks at the top. Rule #1 - No spaghetti in the front row. Jacks on the sides though? Between Metropolix/Gx, and Scales... It can work. Just a handy hint though... When using English "add/subtract" (+/-) you used add correctly, but one time you said "distract" (ablenken) and the other time you used detract (beeinträchtigen). When talking in math terms, in our case voltage, it's always add/subtract. Distract and detract both have an idea of taking something away, but not something physical. You take away ideas/concepts, not things. Like "I distracted the baby with a squeaky toy" or "Stop arguing about (A), you're detracting from the importance of (B.)" Sorry, I'm an English teacher, I can't help myself. Have a great day, I've come to really enjoy your videos.
@Detroit-Berlin
25 күн бұрын
@@richarquis Thanks, in case you’ll be putting it in a skiff, the module (although not extremely deep) is not skiff friendly. Yes my english has some hiccups from time to time, thanks for pointing it out I’ll try to think about it the next time 🙂 Always welcome to use my affiliate links should you buy one, it really supports the channel 👍
@danieleden1856
8 ай бұрын
Great video ! It's definitely a daunting module until you break it down like you've done
@Detroit-Berlin
8 ай бұрын
thanks 😊
@rasmusnordholt-frieling8427
Жыл бұрын
Love your doepfer Videos!
@Detroit-Berlin
Жыл бұрын
thank you 🙏
@heliumsoundzzz
2 жыл бұрын
It's really puzzling what's possible to obtain as quirky groove from this module that I've never been interested in before. At times I feel I'm back in old Black Dice vibes. Great thanks for the discovery and great review, I really appreciate 😉
@Detroit-Berlin
2 жыл бұрын
Thanks 🙏
@gunnarwaage4343
2 жыл бұрын
Thanks for this video, I have this module and I was actually working with it today, its very inspirering, Brings about quite unexpected results. A very underrated module.
@Detroit-Berlin
2 жыл бұрын
Absolutely true 😊
@1heUndertaker
2 жыл бұрын
Your opinions and thoughts are very interesting, thank you for sharing your experiences! Looking forward to the other modules which you have. I'm just starting on the modular journey and your videos help much !
@Detroit-Berlin
2 жыл бұрын
thank you 🙏 glad you are inspired by my videos
@briesmodular
2 жыл бұрын
I feel, and this might sound contradictory, the more modules you have the more you appreciate the ones that are a little bit bigger. In a dense patch they are much easier to navigate. In the end it's the power-supplies that are the most expensive, not the wood or even the rails, so there's no reason to cram 100 modules in 84HP as a big module doesn't necessarily drain more power.
@Detroit-Berlin
2 жыл бұрын
I totally agree 👍 I’ve always liked bigger modules and modules where the jacks are all on the top or bottom as this makes ergonomics so much better. Even 8hp modules with the jacks all over the front-plate are hard to navigate when there’s a lot of patching going on. I would say blanking panels are your best friend in that situation, I might do an episode on those 😅
@thebobbybabbitt7703
Жыл бұрын
Totally agree. As I grow my system to its size now, I don't mind adding in a 28 hp module. As long as it earns its space
@assistantassistant5516
10 ай бұрын
That was really great and helpful - thank you! Gruss von LA.
@Detroit-Berlin
10 ай бұрын
thanks 👍
@marcomeyer7895
4 ай бұрын
thank you!!!
@Detroit-Berlin
4 ай бұрын
You're welcome 🙂
@Bagfuld
7 ай бұрын
+ Very good video. I almost sold this module but now I will give it another try :-)
@Detroit-Berlin
7 ай бұрын
It’s also great when in audio range 👍 The magic happens when you get good in adjusting the 3rd and 4th knob of each row
@Bagfuld
7 ай бұрын
I look forward to try that too, thanks.
@Detroit-Berlin
7 ай бұрын
@@Bagfuld you’re welcome 😊
@jeffehrenberg1650
Жыл бұрын
Thank you!
@Detroit-Berlin
Жыл бұрын
you’re welcome 😊
@forwardmemory5940
Жыл бұрын
Thank you for this video. I’ve been into modular for 12 years and have had lots of Doepfer modules. Due to its size and not understanding it’s possibilities it’s been under my radar. Until now that is - I just picked it up after watching your video a few weeks ago. What is the filter that you use at the start of the video?
@Detroit-Berlin
Жыл бұрын
thanks 🙏 I believe I was using the arp 2500 filter
@forwardmemory5940
Жыл бұрын
Thank you for replying so quickly! Do you mean the Behringer Multi Filter/Resonator 1047?
@Detroit-Berlin
Жыл бұрын
@@forwardmemory5940 yes the B one 🙂
@forwardmemory5940
Жыл бұрын
@@Detroit-Berlin Thanks, I’ll order it through your link :)
@Detroit-Berlin
Жыл бұрын
@@forwardmemory5940 🙏 that would be awesome
@raskolnikov1242
4 ай бұрын
Is it what the poly envelope from Verbos kinda mimics?
@Detroit-Berlin
4 ай бұрын
Sorry I’m not familiar with that module.
@66Gollum
5 ай бұрын
Maybe I missed it, but I can not make it work as simple independent 4 ADSR
@Detroit-Berlin
5 ай бұрын
make sure the switches are in AD mode, trigger each channel individually, use each output individually and it should work. It’s not an ADSR but only Attack and Decay
@Detroit-Berlin
5 ай бұрын
also note that when nothing is inserted in the trig inputs then the trig output of previous envelope is normalised to the trig input of that channel
@binarybotany3218
Жыл бұрын
28 HP 😑
@Detroit-Berlin
Жыл бұрын
In my opinion it is totally worth it, plus you have wiggle room for your fingers 🙂
@binarybotany3218
Жыл бұрын
@@Detroit-Berlin I agree! Kind of a must-have for my techno system. Maybe I can move some stuff around in my plan on Modular Grid 😅
Пікірлер: 43