Definitely a difference in sound, laminate brighter without the low end. Solid wood more mellow with a greater tone range. I prefer the solid sound. But the best guitar for you is the one that sounds good to you! Play on 🙂
@festushaggen2563
3 жыл бұрын
And the one you can actually afford. 👍🏻
@roadapple66
3 жыл бұрын
And the one that feels great, calls your name and won't let you put it down.
@blogsfred3187
3 жыл бұрын
Agree ply sounded “dry”
@williamshakespeare9705
Жыл бұрын
I couldn't tell the difference until I put the headphones on. I think you are dead-on: laminate is brighter without low end. I personally feel the mellow tone of the solid makes for more easy listening.
@tdrduarte
Жыл бұрын
This. I like both but also prefer the solid, but overall I could go with any of these.
@ricksmith201
3 жыл бұрын
I think the best take away from this is that if you can’t afford a solid wood guitar, you can still get a very nice, terrific sounding instrument.
@festushaggen2563
3 жыл бұрын
That’s what I just did. I bought the Martin D-X2E. It has a solid top, laminate body and was the only Martin I could afford. But it feels great, sounds great and is makes me want to play more. That’s all that matters to me.
@ricksmith201
3 жыл бұрын
@@festushaggen2563 congratulations on your beautiful new guitar! Enjoy it in good health.
@festushaggen2563
3 жыл бұрын
@@ricksmith201 Thanks. 👍🏻
@wideningcarrot6
2 жыл бұрын
@@festushaggen2563 I have the same guitar mate, its incredible. You made the right choice!
@StigPrice
Жыл бұрын
If only that were the takeaway...martin do an all solid ooo10 in sapele which is 500 bucks cheaper than the hpl 12e koa
@davidbeal8054
3 жыл бұрын
Okay, I played drums pretty seriously for 45 years, and here's my two cents. Over the decades I owned dozens of snare drums, most of them higher end models --- not the cheap stuff. I would alway take a great laminated maple snare drum over a solid maple snare drum. Not that the solid ones can't be made to sound really good. But, a very good laminated snare is normally much more versatile. They can sound really great over a broader spectrum of tone and sensitivity. Jazz in he morning; MoTown after dinner? That's a laminated snare with just a little tinkering. I have also found the very same distinction to exist with other woods, like mahogany. Anyway, that's my ex[erience. Maybe it's not pertinent to guitars. But, it seems to me that it's at least informative.
@ememe1412
Жыл бұрын
One of the reasons some luthiers prefer laminated back and sides with a solid top is related to the stiffness and consistency (to humidity etc) the material provides. Since the laminated sides are much stiffer (the ply would be cross grained) the diaphragm/soundboard vibrate freely without dissipating much in to the structure. This makes the instrument more reactive to the style of play rather than its own tone characteristics. This is the versatility being noticed in drums.
@gutterbee
Жыл бұрын
Yeah, Im a multi-instrumentalist and most advance with guitar and drums and the way the wood plays into the sound of drums, doesn't translate over to guitar. I've never met a guitarist that thought laminate top guitars sounded anywhere close to a solid top. I have a $650 laminate top Martin I bought when i was young and its sound is kinda disappointing. My $100 solid top "Recording King" sounds soooo much better then my lam Martin. I also have 30 some other guitars and this translates with every company.
@StephanieHughesDesign
Жыл бұрын
Best acoustic guitar analysis on YT. Can't get enough of Chris and Cooper. I go back and forth deciding between an 000-13e or GPC-13e. Adore the sound of Martin and Taylor guitars - especially the fingerstyle..
@ricosuave6731
3 жыл бұрын
Cooper rockin that denim/turtle neck ensemble with no F's given.
@SuperEdge67
3 жыл бұрын
Yep looking like he should be making shampoo commercials.
@soofitnsexy
3 жыл бұрын
its texas....
@hathaway.1166
3 жыл бұрын
Mans got drip
@sandywinfield9406
3 жыл бұрын
Lookin sharp
@markmckinney9821
3 жыл бұрын
Can I just day this. You, your channel and your music store are all top notch and fantastic. Please never shut down and continue what you are doing. I'm a lifelong musician and I always watch your channel because you just are absolutely awesome in every way. Kudos and love from Colorado
@swimgc
3 жыл бұрын
Love the sound of the layered back and sides more. Both sound very good. It’s a matter of taste. Solid top is the key.
@Robemmet49
3 жыл бұрын
I think the solid wood guitar had a mellower "wider" sound, whereas the laminate was brighter and more focused. Personally, I prefer the wider and deeper sound of the solid wood guitar. Nice presentation!
@edroberts8405
3 жыл бұрын
I agree 100%.
@fueymanchoo1291
3 жыл бұрын
Absolutely correct. I have an all solid, and 2 solid top/laminate sides-back. The difference to me seems to be how wide the frequency band is. The laminate ply acoustics are more focused and possibly missing some of the mid range warmth.
@henk-allevanderwerf6974
3 жыл бұрын
I agree
@kaushalsuvarna5156
3 жыл бұрын
Exactly what I felt
@preetampatil6501
2 жыл бұрын
if wider and deeper sounds is what you prefer, why not try a nylon string guitar. they generally come pretty cheap too
@Ones_Complement
3 жыл бұрын
The layered one surprisingly sounded richer and more dynamic to my ear. Never would've expected that. Maybe the back and sides matter less than one would think.
@ComicKish
2 жыл бұрын
Why not record.the audio and show it in graph 📈 form while.unplay it so we can see 🙈
@AchillesWrath1
2 жыл бұрын
I agree. To me personally Takamine are my favorite sounding acoustic guitars and most of them have laminate sides. I have a reimagined Martin D18 and a 20 year old cedar top Takamine that cost about $700 new. I always wanted a D18 and i've now got one but i have to admit the Takamine sounds better. The Martin D18 sounds really good in the open chord position but the Takamine sounds good everywhere. The D18 not so much. The bass is there but the mids are not further up the neck for rhythm and strumming. Tak just sound good everywhere all over the fret board. It's led me to believe almost all of the tone comes from the top wood and bracing. The Takamine using laminate sides actually makes the guitar stronger and they can get away with less bracing which to me gives it a nicer sound. So contrary to all the guitar snobs out there who think all solid wood construction is better i have to disagree. Laminate wood is a positive.
@cooloutac
Жыл бұрын
@@AchillesWrath10% of it does. The back of sides color the low and most bottom of sound. Believe it or not I like the hpl the best if for solid wood it would have to be mahogany because I want deep punchy bass.
@luc5798
10 ай бұрын
I think all solid wood is fuller and richer. We hear it especially when strumming...
@brucejohansson9552
3 жыл бұрын
Great video / here’s my take fwiw after 60 years and as many guitars. 1- An accomplished musician like Chris can make almost any guitar sound enjoyable. 2- Feelings - how you Feel holding and playing your guitar. That’s unique to each person. Price, name brand, construction, age, stage of life, confidence etc. it’s all comes into play when hugging that collection of wood & steel components It’s a love affair 3-Magic: after all the physics a musician is in search of the magic and pride in making it. For me either at home or onstage I want a guitar that is reliable/ sounds good/ solid wood ( more magic than laminate) well respected name brand/ classy not flashy. 4-If unsure- buy a Martin standard series, you’ll never regret it. They hold their value if you decide on something else. 5- environmental & political concerns. I don’t want a guitar built under poor working conditions environmentally or politically. Do you? Keep Strummin’
@hoompaloompaa
3 жыл бұрын
I cant afford the martin standard series. So ill just watch youtube
@brucejohansson9552
3 жыл бұрын
@@hoompaloompaa you don’t need a Martin Standard Series to have an affordable solid wood great sounding acoustic guitar. Identify the specs that are critical to you. Scale, nut width, cutaway, size, neck carve, then move into woods used. All depends on you. There are excellent new solid wood guitars between $500-2,500.
@festushaggen2563
3 жыл бұрын
Good advice there. I just bought my first Martin yesterday. It’s the D-X2E. It’s their entry level but it’s a Martin and it’s all I could afford. It was twice the cost of my Yamaha acoustic. I wasn’t even looking for another acoustic but I saw it, played it and couldn’t put it down. I had to have it. Not only did it feel and sound great but it brought out different styles for me and I thought I sounded better playing it. It was love and no matter what else is out there or what they may cost, nothing will make it sound bad or take away my enjoyment of this great guitar.
@brucejohansson9552
3 жыл бұрын
@@festushaggen2563 Congratulations
@That.Guy.
3 жыл бұрын
You now have guitar fever. The only cure is to have however many guitars you have now plus just one more
@twowheels808
Жыл бұрын
Both sounded great in their own way. The all-solid was definitely warmer and mellow with more low end. It almost sounded like a all mahogany. The laminate was brighter and dare I say more balanced. The laminate is what I would use to record and play live, but the all solid would be my just me and my guitar getting lost in my backyard or front porch.
@BRADRANCH
11 ай бұрын
I think the same. That bottom end tone is what most gauge a great guitar on. And if the bottom is muddy thats normally OK with them. But modern performers that work regularly know that's not AS important when running through PA gear. THe laminate is what youd want when trying to cut through a mix with a full band. I look for playability first, and if the tone is there then that's a bonus. A bluegrass player would not agree. But for me that is the case. Taylor wouldnt sell many guitars if it were just about bottom end. However I have Martin and Taylor, love both but really love the Martin NECK. That's why were all different. :)
@BRADRANCH
11 ай бұрын
Of course in the studio everything changes :)
@natebrook
3 ай бұрын
This comment section gets it!
@tonyrollins8757
3 жыл бұрын
I really wanted to like the solid wood more but to me the laminated guitar sounds better
@fleadoggreen9062
3 жыл бұрын
Honesty is the best policy
@festushaggen2563
3 жыл бұрын
I wish more people were willing to say this.
@lpjbird
2 жыл бұрын
Yep I really believe people are a little brainwashed. Blindfolded I don’t think that the solid wood would be their choice but maybe.🤷♂️
@trevorgwelch7412
3 жыл бұрын
It use to matter , however in this ever changing technological world we live in it does not matter . The new Taylor laminates are truly on an entire new level .... Cost Saving and less prone to problems with Temperature flux and Humidity below 40 % ... Great Video . 🎼🎼🎼🎼🎼🎼🎼✨✨🇺🇸
@paulmcanear825
2 жыл бұрын
You guys are such geeks. I love it. Thanks for your insights. I take from this conversation the importance of being clear about what I expect from the guitar: playability, comfort, sound, aesthetics, collectability, affordability, prestige, etc. each having tradeoffs while each plays a role in long term satisfaction. Thanks for your help seeing this.
@Citizen_0_5
3 жыл бұрын
I don't know how I ended up on this channel, but I love it. I've been here for days. Hours and hours learning about all these beautiful guitars. Now we just need this stuff to come back in stock haha. Thanks for the education guys. Keep up the good work
@Alfredel2
3 жыл бұрын
I am blind so I could not tell which guitar it was which but from listening to the both of them; I felt that the first guitar was less present and did not have the articulation that the second one had. I preferred the second guitar on the demo. Thank you for posting these videos. I really do enjoy learning about all of the differences between guitars.
@JeffandHansel
3 жыл бұрын
I'm also blind, so I don't know which model was which. The first one sounded a little brighter and more open, and the second sounded more mellow and focused.
@breauxtide6217
3 жыл бұрын
Vissibly Charred, I wonder how did you know he's blind as well
@davidpetersen8909
2 жыл бұрын
@@breauxtide6217 txt to speech programs is a Thing when ur blind dude 😊
@BrewReview
2 жыл бұрын
Yep, plenty of features are built into modern technology to assist the hard of hearing or sight. Fantastic that everyone can enjoy the internet.
@Big.E
3 жыл бұрын
Yeah solid wood rounder sound, but weirdly I preferred the Koa on this occasion. Best to visit a shop, play guitars in your price bracket and buy the one that inspired you the most 👍🙂
@mogasm6091
3 жыл бұрын
Your presentations always brings a smile, thanks fellas
@lhvent
3 жыл бұрын
No issue with laminate back and sides. I have an FG830 that sounds amazing.
@CatchMeOutside361
3 жыл бұрын
There is no “issue” but there is DEFINITELY a difference. It’s all about preference.
@tmo7734
3 жыл бұрын
I must agree. I have a 48 year old Yamaha FG-160, which sounds fantastic. I run Nashville strings on it. Beautiful tone.
@StymyParsley
3 жыл бұрын
@@CatchMeOutside361 yeah, I mean it matters who makes it as well, a great builder making a solid top acoustic will do better than a crappy builder making an all solid. That being said I played my brothers Yamaha for years as I learned to play but when I got an all solid Martin D16 I felt that I could really push it so hard, but also when playing softly it was clearer. Like with the solid top I’d learned on I hit a very clear limit in output and it wasn’t as clear when playing soft or fingerpicking.
@festushaggen2563
3 жыл бұрын
Yup. I've had a Yamaha FG730s for 6 or 7 years now and even though I just bought a Martin, I won't get rid of it. I had changed out the stock plastic nut, saddle and bridge pins for bone which made it sound even better. Next to the Martin, it still sounds great. A good guitar is a good guitar no matter what you compare it to.
@That.Guy.
3 жыл бұрын
I have a yamaha fg830 too thats sounds amazing,,,as long as i play the martin d-18 second lol play tha martin first and the fg is thin
@bongocuba
3 жыл бұрын
I heard a big differnce. Solid sounds warmer, not better. I enjoyed both and own guitars with solid wood sides/back and with laminate sides/back, all with wood tops. Excellent video.
@dalehoward9977
3 жыл бұрын
I agree. Can hear a clear difference but love them both. I just hope someday I can sound that good with any guitar.
@GMec78
3 жыл бұрын
Yep I can hear the difference the laminate highs were more pronounced and it makes sense since a laminate wood is harder.
@ST-jy9eg
2 жыл бұрын
I love the work you guys do. You add great value for your audience. I was conducting a test like this once , I strummed with more power to get the woods to critical mass. {On another episode I would really like to see the performance of these two guitars once you "turn it up" a bit - put the woods into strong vibration mode by strumming loudly with a heavy pick. } I found when I pushed the plywood it sonically pukes at a lower threshold - it can't vibrate past a certain point (that much). It has Less headroom. But solid back and sides can flex more and .... 'sing' in it's own true voice. Plus solid has more headroom. When you start hit'n strong, solid woods get up and performs even better! it seems like a progressive increase in sonic value. I found the solid body acoustics Can handle and produce louder volume. I find that laminate guitars reach a critical mass sooner than a solid body, and those In your test were not pushed hard enough to investigate how they "react". It's all about how that wood "Reacts' under pressure - to your pick/pluck.
@Martinroque77
2 жыл бұрын
I like to believe solid wood guitars age better than laminated ones. I've owned both types of guitars and while laminated doesn't sound bad at all, it feels like the sound stays the same after years of use, while the solid one sounds better 10 years later.
@johnwbanjo
3 жыл бұрын
Definitely noticed a difference. The all solid wood model had more bass and a richer overall tone. Neither one sounded bad, basically just a preference, but I liked the all solid wood guitar better.
@steveedsel5524
10 ай бұрын
Agree with you on all points
@stephenlongo8185
2 жыл бұрын
My personal preference here is the 13 (solid) but, as many have pointed out, they both sound good. As of today, they are both priced at $1299 on Reverb and through many different retailers. I own 2 Martin 000-16 guitars. One is from 2002 with a gloss top (000-16 GT model) the other is a 2015 and has a custom sunburst top. They both have solid tops and laminate mahogany bodies, and the burst actually has a brighter and (to me) more pleasing overall tone. I bought them both used, and believe they have not lost any value in the several years I have owned them.
@aleksandarangelov6572
3 жыл бұрын
I thought that they sound exactly the same (i have done a blindfold test :D). To my ear the only difference is that the solid siris is kinda muted or should i say compressed.. btw the koa looks the part too. So for me the 000-12e all the way.
@washingtonbob49
3 жыл бұрын
Thank you so much for another thought provoking video. I am sure that in a drednought it makes a difference like Martin DM vs Martin HD-28...where you can literally feel the solid wood guitar in your body vs the laminate.. In these OOO's the difference was minimal to my ear.
@hoforo
3 жыл бұрын
I just purchased a 22 year old Martin D-2R that has a solid top and laminate rosewood back and sides. It actually sounds better than my friend's all solid wood, Martin D16GT dreadnought. Both guitars were using the same new strings. Maybe I got a gem, but it changed my views on laminate guitars!
@jed1166
3 жыл бұрын
Glenn Frey’s sweet sounding Takamine 360 dreadnought has been heard by millions of Eagles fans. It has laminated back and sides, (his signature model has a solid back). My Takamine P4DC has laminated sides, as almost all Taks do... The strings and pick you choose will probably effect the sound more than the body woods.
@Private-lw1td
3 жыл бұрын
Brands like Takamine and Yamaha uses quality laminates. I'll take an all laminate Tak/Yamaha over some nameless solid top guitar.
@shawnreed9016
3 жыл бұрын
You can definitely hear the difference between the two. I think that they both sound incredible. Great video as always. 🤠🎸
@RohitSguitar
3 жыл бұрын
Really nice comparison and playing! I couldn't tell a difference during strumming. With fingerpicking, the 000-12e sounded punchier while the 000-13e sounded like it had a bit more sustain and reverb. I wonder whether this is a difference of laminate vs solid wood or reflects the difference in the woods used. The koa veneer on the 000-12e has a core of african mahogany, while the siris on the 000-13e is said to be more like rosewood. I've played plenty of great guitars with laminate back and sides, so it's certainly not a rule that all-solid is always better. One thing I've heard, however, is that an all-solid guitar will improve with age even more and become more resonant because the solid back/sides will break in, while a laminate won't.
@karlderdelinckx
2 жыл бұрын
I also noticed the better sustain on the solid wood version.
@RogerThat902
3 жыл бұрын
"That could be a whole other video" OK, I'll be waiting right here for it :)
@billsmith3042
3 жыл бұрын
Layered one sounds much better all around...better projection, more overtones. Solid one sounded flat or even a bit muddy. IMO the stiffer back gets more out of the sitka soundboard. I experience the same thing on my D35...the back is very stiff with 3 joined pieces so it reflects the soundboard back more out the soundhole if that makes sense. THAT being said, I still think the solid would sound great with a Rare Earth mic/pickup system. In this test video I would have wanted to hear the solid with the mic a bit closer than the laminate. I once had a solid mahogany low end martin dreadnought that sounded great fingerpicked but when strummed the solid woods actually ate the sound and had no volume. sold it.
@lorricook806
Жыл бұрын
The funny thing, is that my expectation was to like the sound of the solid wood guitar better. And, amazingly, loved the koa/laminate's tone! It sounded brighter and more delicate to me, certainly exceeding my expectations. I guess I have to get away from thinking of plywood, tonally the combined wood sounded lovely.
@rolstonlarge2808
3 жыл бұрын
I think that the layered koa sounds louder & clearer sound than the solid wood Martin.
@Joe-by3wh
3 жыл бұрын
I agree with you in this circumstance. I personally own a laminate side and back Martin and it sounded more like the solid wood, like I said this is my personal guitar.
@roadapple66
3 жыл бұрын
It is brighter, but everyone likes their own idea of tone. They are all correct in their judgement of the instruments: If you like the way it sounds, by all means, play it!
@dean8842
3 жыл бұрын
Of the two guitars sampled here, my ear thinks the layered-koa 000-12E sounds a bit richer than the all-wood 000-13E. This REALLY surprised me as I would normally choose an all-wood instrument over a laminate. Weird.
@greggesaman535
2 жыл бұрын
Really big difference in sound. Much more than I expected. I prefer a brighter sounding acoustic, so the laminate would win for me - no contest. But that's me. Biggest take away - Play guitars before you buy. I would have never guessed the outcome of this test.
@Dannyvm27
3 жыл бұрын
I can definitely tell a difference. The solid wood has way more sustain and a smoother sound to my ear. However, they both sound great!
@delldavis6222
3 жыл бұрын
I'm not qualified to grade these two guitars, but based on MY experience, you need to spend some time with a guitar, to determine if you like it. I've had many guitars, and my current favorite, is a Finnish, branded Espana, Classical , which is my favorite. It is not expensive, has a steel reinforced neck, shows signs of a somewhat rough life, serious crack on the base side of the top, which I swear to fix at some point in time, but I like the way it sounds. I like the way it feels in my hands. I also have a Spanish built guitar, Solid, which is louder, more powerful, more attractive, MUCH more expensive, but I prefer the Espana. The point? , Play it. Consider what you intend to use it for. If you just want to hang it on the wall, that is a justifiable motive. Enjoyed the video. By the way, for what it's worth, I liked the 000!
@NeonShores
Жыл бұрын
The laminate would be great to cut through a mix, or in a band environment and the solid wood with it's more mellow sound would be great for singer songwriter style stuff.
@brewer13210
3 жыл бұрын
I think far too often we get tied-up in "what sounds better", rather than acknowledging that they sound different, and just deciding whether or not we like the sound.
@banjoist123
3 жыл бұрын
This is very true with high end banjos as well. Once you get above a certain level of quality, it's not longer about good, better, best, just different. And a lot of the difference is just user preferences.
@camara1194
3 жыл бұрын
thank you!!!!!!!!!
@jshu1625
Жыл бұрын
I always choose my sound from the treble side of guitars because the mid and bass side of things already have a natural mellow sound built into them, but the treble side can make or break it for me... if it is low fi... not brittle, tinny or jangly then it will sound even and full coming out of the sound hole...all solid on this one!
@MustafaYoussef
3 жыл бұрын
I got 000-12e last week and I am in love with it. The 000-13e was not available, but I tried the D-13e the GPC-13e and the D-10e and for some reason the moment I held the 000-12e I felt it is the right one for me, I love the sound and the playability. In fact I preferred it and the D-10e over the others. I am no expert but it is true as they say the right guitar for you is the one that feels right when you play it.
@Martin-mc7yk
Жыл бұрын
Hey, im looking to buy the 12e aswell, are u still satisfied with it? How much did u pay for it? Im in europe so the pricetag is Just under 1900$, would u still buy it at that price?
@MustafaYoussef
Жыл бұрын
@@Martin-mc7yk it was around $1400 when I got it, I guess prices increased for everything. I still find it a great guitar, I play it all the time, and for me after trying different strings, I like elixir nanoweb strings the most. I suggest to try it at the shop and compare it to others within same budget if you can, I originally went to buy the GPC-13e but when I played both I liked the 000-12e more. Cheers
@chrisgeorgeortiz1981
2 жыл бұрын
Not sure why I love watching these videos. Makes me want to go get a cheap Martin
@jonmy7
3 жыл бұрын
Having a solid wood guitar is subjectively a marginal sound improvement over a decent laminate and certainly doesn't make me play better. It is nice to have a solid wood one though but don't fret it if it is out of your budget.
@Bryan_Lion
Жыл бұрын
I fricking love this channel. You guys are turning me into a real enthusiast
@christianjward
Жыл бұрын
Interesting discussion, and a subject I was questioning a few days ago. I was looking at buying a 000 Jnr 10 (solid wood top, back and sides), but felt I should play other 000 models such as the X2E, which is more expensive than the jnr, but has HPL back and sides. I honestly went to the store thinking I was going to find that the more expensive models sounded better and that I would end up buying one of those. I'm usually a sucker for the rationale that more money=better and find it can cloud my judgment. After spending an hour playing the various models, I found I could quite easily tell the difference between solid wood and models with HPL....and I always preferred the solid wood models; the sound, in my opinion, was richer and 'thicker'. Consequently I bought the 000 jnr 10 and was pretty happy that the cheapest guitar (but still solid wood) was the one I actually wanted the most and liked the best.
@stormyweather2837
8 ай бұрын
Great choice I like how all solid wood sounds way better to my ears ! Happy New year to you ! 🙂
@odablast1
Жыл бұрын
I actually liked the layered wood for what I wanted. I have a solid wood Martin already but I think the playability of the neck is what makes this brand top notch at any price
@BRADRANCH
11 ай бұрын
That neck is why I love them also. I tell people that I love martin because of the neck, forget the sound. But that's a bonus. I'm not sure if I have seen any reviews about playability. Is there anything more important. I've played and made a living with music but maybe its easy for others and not a concern but I'd dought it. I'd take a thin soundong guitar thats plays good over tone all day long.
@charlesbranch4120
3 жыл бұрын
Thanks, Cooper and Chris! Chris really brought a smile with his little dig at Patrick about smashing guitars... As far as being able to tell the difference, with the smaller more comfortable concert body, I feel that the sound you get depends on how you feel when you pick it up and start to play. The slightly larger Breedlove concert with layered koa B&S seems more elegant when I pick it up than the Taylor Academy 12 with layered sapele (both have mahogany necks, which my son-in-law also favors). I'm guessing the Martins were equipped with the same strings, and my son in law told me that he thinks Elixir Polyweb strings sound better than the Nanoweb, but we can always revisit Andy Powers discussing "Picks and Strings" in Taylor Guitars' video. The best guitar in the world is... the one you're making music on. -Chris McKee (My favorite musical instrument quote, and one I'd bet Patrick wishes he'd thought of.) Happy 2021!
@arthurl2045
3 жыл бұрын
The solid sounds a slight but noticeable degree richer on the more solo-style fingerpicking--you hear more harmonics and depth. The koa layered projects better when strumming and the chords stand out better--the difference could be when the different woods become more harmonic. I would go with the 13e for slack-key guitar and solo finger-picking, but the 12e for Fisherfolk style strumming and occasional finger-picking, when the percussive effect is more important. I don't think you can go wrong with either, it's a matter of your application.
@TommySG1
3 жыл бұрын
First off you two guys have the best guitar show coming from a music store. As far as the all wood thing goes, I own one acoustic, it’s a Martin GPC 28E. Great guitar although I listen to some of these alternative material guitars and I get blown away. It definitely makes you wonder if it’s really worth it. I do love the look of rosewood back and sides though with a gloss finish 🤙
@juleslemelle9027
3 жыл бұрын
000-13e! Deeper resonant. 000-12e More of a "surface" sound
@jf542
3 жыл бұрын
the solid makes your more aware that you are listening to a wooden instrument in its tone.
@StymyParsley
3 жыл бұрын
That’s weirdly very true, idk why I hadn’t thought of it that way before.
@hoompaloompaa
3 жыл бұрын
Can you distinguish it when you hear it on the radio?
@jf542
3 жыл бұрын
@Liquid Ocelot what’s your point? I don’t respond to my instrument in a certain way because I’m thinking of how it’ll sound on the radio…. My relationship with guitar, like many others, is a symbiotic one. And I prefer the woody sound. Belittling musical expression to whether people can hear the difference on the radio is ridiculous and a dangerous game to play with art. Some people might like laminated guitars…. That’s fine too, good luck to em.
@ihbcsomerset6966
3 ай бұрын
You can tell the difference, as you’d expect. The solid tone wood much richer, fuller and bell-like sound with greater sustain. Amazing!
@thomascampbell6374
3 жыл бұрын
The Japanese luthier, Shiro Arai (Aria Guitars) invented the Japanese laminate process which is less of a "plywood" than it is plates of tone woods. It was developed to overcome the changes in temperatures involved in exporting the instruments. I am lucky enough to own a bunch of Japanese acoustics from the 70's most (not all) have solid sitka spruce tops (personal preference) some high end ones are solid jacaranda back and sides, some are laminated. I'm not sure which ones sound the "best" but I will say that after the laminates have had 40 or so years to age, they sound amazing. Perhaps more importantly, for the price of a single decent Martin you could buy both an example of a solid wood and laminate guitar from each of the best Japanese makers (K. Yairi, Yamaki, K. Suzuki, Morris) do the experiment yourself, and still have a few bucks in your pocket.
@TheSoulsandRevive
3 жыл бұрын
I happen to agree. I too have been fortunate enough to play/own alot of vintage/modern Japanese made guitars and K Yairi have the best guitars from a 'laminate wood' standpoint. In my opinion, 'HEADWAY' guitars (although costly) are amongst the best Japanese 'solid wood' handmade acoustic guitars to date and can confidently say they are right up there with Martin/Taylor/Gibson guitars if not better.
@88clintonjc
2 жыл бұрын
The layered back and side sounded sweet to me. That black headstock looks great too.
@richardroyster6631
3 жыл бұрын
There was a difference in sound but I liked the sound of both. There is only a $50.00 difference in price. I would buy the one my wife would choose. Then there is no argument at home. Stratagy #2 buy both. Nice info on the OM vs the OOO.
@BrandonShannonPaul
4 ай бұрын
The 000-15SM is a 12 fret parlor guitar in full mahogany, with a 25.4" scale length and a slotted headstock. Hands down the best acoustic I've ever owned
@MOAB-UT
2 жыл бұрын
Having a solid top for that vibration and sustain is the most important factor. Back and sides can be engineered using real wood or laminates. It's about the density of the material and not so much whether it is wood or laminate. You can have a dense laminate and a less dense wood and vice versa. These things can be measured. Laminate is stable and will be consistent for year to come. Wood is prone to cracking and is less stable. If any reviewer wants to do a completely fair, unbiased test- do a A/B completely blind. Get opinions- then reveal which was which. Modern laminates with real wood tops hold their own very well. I recently went to GC planning to buy an all wood Martin D-18 last week but I walked out with a Taylor 110e. It sounds great. Maybe ever so slightly less in terms of mids but not by much and when you run it though an amp and eq it, the difference is almost imperceptible.
@audiotalk6155
2 жыл бұрын
From the first note, the solid wood tone sounded richer. Without question. Layered sounded good, but wouldn’t be my choice. Solid wood is lower priced? Bargain. You guys do an awesome job.
@lordofthemound3890
2 жыл бұрын
Some high-end classical guitars are made with laminate backs and sometimes sides too. It’s not just of question of solid good/laminate bad. I think it just all comes down to sound preference.
@markharwood7573
15 күн бұрын
It's yet another case of they're plainly different, but one is not necessarily superior to the other. Laminates are fine by me. I like Cooper's question at 16 minutes. Solids seem to me to feel more alive against your body, but I have never made a fair comparison. Interesting stuff, chaps!
@mickymillersson4376
Жыл бұрын
As a player I can tell the difference between, solid rosewood, mahogany, walnut and maple backs and definitely laminate backs. I agree it's the top that gives you most of the tone. I've played cedar, spruce (different varieties) and mahogany tops. They are all different. Laminate backs are very noticeably different in tone.
@DerangedTechnologist
3 жыл бұрын
a) Thank you! This is excellent. b) Substantially as Frans noted in their comment, it seemed to me that the solid wood had more pronounced low or low-midrange. This brings up something you didn't seem to say much about: when you can hear a difference, is it necessarily one that you care about? I was a bit surprised to discover that I had a preference. (If it matters, I like the richer low end.)
@gsquared5914
Жыл бұрын
As a primarily electric player the all solid model sounds like it has a very subtle compression to it just mellowing out some frequency and providing a little clarity, very subtle but that's what i think
@paulinabak6898
2 жыл бұрын
Thanks for the presentation. It's great that you do these comparisions. The case is that sometimes even the choice of a pick makes the difference in the sound😅
@stevenhamilton5238
3 жыл бұрын
Great Comparison. Well done. Solid all the way for the woody, round sound. The laminate accented the highs a lot more, but I greatly prefer the sound of the mellow solid wood.
@G3N13_M4N
2 жыл бұрын
I like the idea of solid wood over layered, however I did a blind sound test for this video and couldn't hear a difference. So I guess as long as its a well made guitar im happy
@hypokrates1291
3 жыл бұрын
Honestly the layered koa is sounded brighter and wider to me.
@TheWorshipperofGod
3 жыл бұрын
I think that you can definitely tell the difference especially when you moved into the picking. It was much less apparent in just strumming. I should also add that I wasn’t listening with headphones
@michaelbrowning2625
2 жыл бұрын
I preferred the sound of the one with laminated back and sides in this recorded comparison.
@TheNewenglandboys
3 жыл бұрын
I have both and have played guitar over several decades. The slight difference in the sound of laminate vs solid is negligible and in my opinion, the benefits of laminate outweigh the little difference in sound.
@SpurOne76
Жыл бұрын
Both sound great. I lean toward the all solid back and sides. It has a warmer sound but the Koa is bright. Hey, they are both Martin. Everyone should own a solid top Martin.
@Ravenscaller
Жыл бұрын
Sustain: I'm always interested in the sustain of a guitar and you never let one ring out. You might be interested in what you discover. Hard strum with pick. My 0002X rings out in 4 seconds. Which doesn't seem all that noticeable until you compare. I have a GS-Mini that will ring for 6 seconds. Half the body size but holds a tone a third again alonger. Humm. 00017SM Spruce top Mahogany sides and back 1O seconds. The overtones bouncing around and mingling around are like going from mono to stereo. Huge difference. I personally believe that the D18 is the real workhorse of Bluegrass Martins. The loudest guitar I've ever played was a 57 D18 in a shops practice space. It was actually overwhelming yet players buy D28s for the prestige thing. In this review the compression of Internet streaming makes it hard for my ear to define the difference although I can tell that they don't sound the same. I think I'd actually buy the laminate but then played in a store I might pick the other.
@whatwouldhousedo5136
Жыл бұрын
I recently bought a Taylor 214CE (layered back and sides), and also own an older 416CE Spring Limited (all solid). I was surprised to find that in some ways I prefer the 214 to the 416. The 416 has a bit richer tone overall, but the 214 has more presence and clarity especially on the lower notes; "piano-like" clarity, and it has The Sound that I've had in my head for years, like the classic recordings we all grew up with. I like the neck slightly more on the 416 because it's bound and gloss where the 214 is an unbound satin neck. Also, the back of the 214 is not braced- it is arched for strength, and I'm wondering if that adds to the impressive sound. Also, it's LOUD, louder than my '79 F340 SD Takamine lawsuit dread.
@gregweber3387
Жыл бұрын
Martin making some great guitars period. I've actually been looking at the D-X2E which is HPL with a spruce top and I'm pretty impressed with the sound and the price is so reasonable.
@dxcman1
2 жыл бұрын
1. I love the black tuners on the Koa one.. A great look. 2. How will it mature in 25 years versus the solid guitar?
@bigdeadlizard
Жыл бұрын
I own a 1970s Yamaha FG 180 and previously owned an FG 200. These are all laminate, including the top. They both sound (or sounded) tremendous. I love my small-bodied FG-180, and it cost me practically nothing. I will say it does not sound nearly as full or rich as the 1940's Martin 00 a friend let me play once, but I'm not the player he is, either.
@natelloyd6312
2 жыл бұрын
I turned my screen around so I wouldn’t be biased towards which guitar was which… with that being said I could hear the second guitar sounding a little more mellow, but it was very subtle! Both guitars sound very similar and are beautiful instruments!
@CarlandGrace
3 ай бұрын
I like the D18 sound. In my opinion the D10E is the best guitar in the Martin lineup with the added bonus of having a pickup for a bargain price. It’s a must have for me.
@frans3999
3 жыл бұрын
The solid wood, has nicer lows.
@wayneleroy6382
Жыл бұрын
My understanding is, like a speaker enclosure, the back and sides should be rigid. Likewise, the speaker cone and the guitar top are designed to move. A rigid enclosure allows the top to project more sound. If the back and sides flex, simply holding the guitar against you would change the frequency response and volume of the guitar. Therefore such a guitar its sound would change depending on who is playing it, how much body fat and clothing is against the back and how tight the player holds it against himself. It would be interesting to experiment with this and see how much various guitars sounds change with varying amounts of clothing and fat against the back while testing. as is a speaker enclosure and the top of course should move like a speaker cone. In both cases
@miggybyte
3 жыл бұрын
Solid wood ages and sound gets better through the years. With that said, 90-95% of the sound resonates at the top wood so you won't regret buying solid top with HPL back & sides.
@sandoncrowder7839
Жыл бұрын
Just having solid wood sounds cooler, but I don't think there is any discernible difference at least not to the point you can say one sounds better. It's just that when you hear "this guitar is all solid wood" it instantly sounds better in your head.
@iancurrie8844
Жыл бұрын
I hear your opinion and I'd like to offer a different perspective. I played the Fender CD-60v3 and the CD-60S and I actually preferred the sound from the v3 which is laminated. Further, the fact that it came with a great arch top case was the cherry on top. This guitar is meant for use around a campfire at a summer camp so laminated would seem to be prefereable for this use case.
@skip4618
3 жыл бұрын
my experience is solid tops have the potential of “opening” up and getting better with age... but there are so many other factors to consider ... i’m a fan of my old breedlove which sings
@barrettflorida
3 жыл бұрын
These are both solid top. But yes, all solid definitely opens up over time
@banjoist123
3 жыл бұрын
One of the first top replacements I did was to put some pretty good sitka on a 70's Yamaha hummingbird copy. It make almost no difference at all. I have a 76 D-35 that was sold to me because it "sounded like it was filled with whipped cream." I've rebraced, shaved braces, and put a new torrified spruce top on it, and it still sounds like it's filled with whipped cream. I just recently worked on an Avarez Yairi from the 80s that was all ash, top sides and bottom, and it sounded pretty good, certainly very playable. Wood is a mystery.
@cliffordgwekwe9853
3 жыл бұрын
If I were to play one them in a band setup, the layered koa seems to sound more sweeter to my ear and I think it would cut very well in the mix. Thanks for the review.
@antipodesman2
2 ай бұрын
A major factor that is usually overlooked is repairs. Repair of a laminated guitar would probably require replacing the back and sides. This would not be worth the cost in most cases.
@95SLE
3 жыл бұрын
This could be a 3 hour Jerry Springer argument. Nice job with the presentation.
@kennybluet5527
3 жыл бұрын
This "Dueling Banjos " is better suited for Springer.
@metalrunner4398
3 жыл бұрын
All solid is better! GS mini: hold my beer 🙂
@dougrobinson8602
3 жыл бұрын
Question; Do both guitars here have the same strings? I've heard bigger differences on the same guitar with different strings than between these two guitars. I thought the layered koa sounded brighter, which isn't my thing, but I understand why people like it. It's not in the same frequency range as a voice, so it doesn't muddy vocals. Maybe one takeaway is the Martin adage that they start with a tone and build a guitar around it.
@GabZ_98
3 жыл бұрын
Good point. Strings really matter.
@don6538
3 жыл бұрын
@@GabZ_98 Totally agree. I would guess that in their intent to highlight differences, then in fairness, they both have the same strings. But at least it should have been mentioned. Otherwise any comparison is bogus.
@garysturner1
3 жыл бұрын
According to the Martin site, they come with the same strings.
@don6538
3 жыл бұрын
The solid wood was not as loud, but also seemed to have a fuller sound. The laminate was louder, but also less resonate. Personally, I own both laminates (w/solid tops) and all-solids, mostly larger body guitars, and prefer rosewood solids. But laminates do a good job at holding their voice in highly humid conditions. Based solely on your video, I would prefer the solid 000. Not a Martin fan, but thank you for sharing.
@adventureunderground2234
Жыл бұрын
I have a 1976 guitar that is laminate mahogany back and sides. The manufacture has given 2 different stories on the top. They said it was solid spruce and later said it was laminate spruce. it looks like laminate top but sounds like a solid. Yamaha FG295S. this also was Yamaha's 100th anniversary guitar. Solid top or laminate I'd put it against most acoustics in its price class. BTW, it retailed for the same price as a LesPaul the same years. Not a low end guitar at all. Have a hard time believing its laminate anything at that price point. I recently added a LR Baggs Lyric in it. It gets played at church alot.
@cmoreno12345
3 жыл бұрын
Absolutely heard a difference. Solid wood was richer sounding at all volumes, especially at higher volume. I bet if we check again the body does move with solid wood and adds to the experience.
@MrMothGrays
3 жыл бұрын
9:56 10:27 10:59 11:49
@richellmcknight446
2 жыл бұрын
I hate to say this, but it's really hard for me to hear much difference on a video- in PERSON, bent over the guitar and playing it, YES, video, ahhh, not so much🥰 What I want to know is what wood do they use UNDER the laminate? I can't find any info on what is being used, not just this brand, but ANY brand, in general.
@tomw9412
3 жыл бұрын
It's impossible to exclude an individual's bias from these types of comparisons. Why not hide the guitars being played and then let people say which they preferred (ie. guitar a vs b)?
@nostro1001
3 жыл бұрын
100% agree...once visuals are at play preconceived bias muddy the waters. 😊
@banjoist123
3 жыл бұрын
Yes, and we're all listening to this through different internet connections with different latencies and sound cards and headphones, speakers. Certainly not a science:)
@Faiirchild
3 жыл бұрын
I watch the review - then close my eyes and randomly pull the slider to a random point in the demo to see if I can recognize the sound I think I want. Sometimes I'm right on and sometimes its not so clear, depending on the comparo and my level of bias going in. I like these reviews because he tries to play the same thing the same way on both instruments.
@nostro1001
3 жыл бұрын
@@Faiirchild Agreed...the reviews are solid. And you've got an interesting way of trying to avoid the 'sight' bias. As per original poster we likely don't need to know prior...just an A/B sort of thing. Then such reviews would be totally on the money. 😃 Cheers 🎸🎸🎸
@festushaggen2563
3 жыл бұрын
Yep. Most people familiar with guitars will choose a team immediately and root for theirs to win. The value of a blind test can't be understated.
@Walker615
2 жыл бұрын
You guys are a great source of info. Great work!
@jdstan9650
3 жыл бұрын
Koa is a free pass for guitar builders to increase their profit margins. Siris? Solid wood Siris? Solid hardwood? HPL? Richlite? Martin is the worst when it comes to transparency on what the hell is in their products...
@jt3483
3 жыл бұрын
A lot of guitar builders use inferior Koa too or don't finish it to bring out the true beauty. See Taylor's K24ce Builder's Edition.
@sc12100
3 жыл бұрын
I love Martin and Im an admitted fan boy owning 3. But I cant argue your statement. Martin does have transparency problems. I spent $3k on one of my Martins (which I absolutely love by the way), and it came with a "Select Hardwood" neck. I mean come on Martin - $3k for an awesome acoustic and you cant be honest and at least tell me what species you're using? They did confirm it was a Genuine Mahogany neck but still. Taylor isn't so innocent either when it comes to their builds. Bob uses the conservation idea to implement "good will" when in reality, its all about profits. When you have a guitar that comes with a 3 piece neck and the asking price is $4k, I no longer buy into your environmentalism. My money is gonna start heading in the boutique arena and at least I'll know exactly what Im getting.
@sc12100
3 жыл бұрын
@@jorgegauthier7697 Does it? Or is it a cost saving measure? Think about that.
@sc12100
3 жыл бұрын
@@jorgegauthier7697 Im glad you like Taylor! Cheers
@sc12100
3 жыл бұрын
@@jorgegauthier7697 Yikes! Did my criticism of Taylor offend you that much? I actually used to own a Taylor GS5E and I sold it because it was too bright of a guitar - which Taylors are WELL KNOWN for. And you claiming half of Martins guitars have little tone? LOL - tell that to John Mayer, Paul McCartney, Jimmy Page, Dave Matthews and the list goes on. If you like bright soulless guitars - Taylors are what you want. I wouldn't trade one of my Martins for ten Taylors. Again, you like what you like and I like what I like. Have a nice day
@sustainablelife1st
2 жыл бұрын
if there is any comparison, as a carpener, i can tell you OSB is supperior to plywood( layered) or solid wood when it comes to warping. Plywood warps easily, and thinner 1' boards warp horribly. OSB stays flat forever. So, for a bang around guitar that won't need a lot of TLC, i prefer laminate - even for the top.
Пікірлер: 601