After wasting money on a micro dagger , I've concluded that at least with a slimline Glock , they're only 500 bucks and this isn't the place to skim money with a clone. The juice isn't worth the squeeze.
@losoway4505
7 күн бұрын
You keep Glock stock?
@mp2764
9 күн бұрын
My sct frame with a g43 upper and shield mags has run flawless
@TGMA-uo6lv
8 күн бұрын
Once again. A lot Solid information. Thank you for the time and effort
@Blackwater2.0
9 күн бұрын
1500 rounds through mine. Not a single issue. It's a fantastic upgrade for your 43x/48.
@Mustangkid29
9 күн бұрын
Nice this will be my winter project now that I know
@GTacticalJody
8 күн бұрын
So many other projects going on I forget I need to take the 43sc out and run it. Glad people are reporting with no issues tho🔥😈
@carlosfernandez1
8 күн бұрын
A few months ago, I builded a 43X SCT. The frame is exactly like yours. I'm using it with the PSA 15 rounds magazines. It worked without any malfunction. (The Shields Arms doesn't work well with either the SCT or the 43X)
@tnsteel
8 күн бұрын
Put a PSA micro dagger upper on that and PSA micro mags and it runs good. I wanted the SCT lower because it came with Glock parts whereas the PSA lower has glock "like" parts.
@mlite_33
4 күн бұрын
My trigger went dead to my SCT19 frame, so swapping the trigger and housing mechanism to OEM Glock parts is must on these guys. The SCT trigger tends to become dead if it is pulled forward for whatever reason. I’m more than sure this is the issue and I haven’t seen the full video yet.
@spnfirearms
4 күн бұрын
Exactly. The bar is not bent at the right angle: respect
@wtdconcepts
4 күн бұрын
I have the SCT19 frame and I have had a similar experience. I like the frame but it only works reliably with stock Glock parts. Aftermarket trigger disconnects and such would not work. Note that the SCT19 frame WILL NOT WORK in most Glock holsters (its too tight/doesn't fit) without remelting the kydex and such which has been a pain. I think if you chose a holster for another glock clone (like maybe P80 or Daggger) that has a picatinny rail (not a glock accessory rail), that would probably work.
@josearaujofilho1547
9 күн бұрын
I belive this “glock” was a “Taurus” in a life before
@Joe-ie8vk
8 күн бұрын
Hahaha perfect!!!
@eightsixtyy839
8 күн бұрын
Most Tauruses are just as reliable as Glocks, Glocks are the best 300 gun you can get for 600
@LoBiTo-jc6ir
8 күн бұрын
I just changed the trigger shoe and the connector on my SCT and my G43x, and now they're both pulling at 3.5 lbs but still have been to the range to shoot the SCT
@sleigh4019
8 күн бұрын
Yeah tell jerry mitchlik he pulls his shots cause of his grip..😆😆😆
@JJoker69
9 күн бұрын
Cool, seeing PSA never has their Micro line build parts available
@jimbo3214
8 күн бұрын
I have several Glocks and they work flawlessly. I don't mess with my Glocks. If I want another Glock I don't have I save up and buy it. For me its stock Glocks only. Just saying...
@woodystube1000
8 күн бұрын
Oh yah? So all of your Glocks are bone stock? No upgraded sights, mag releases, magazines…?
@jimbo3214
8 күн бұрын
@@woodystube1000 correct.
@kenjihiten4865
9 күн бұрын
I do agree with the over lubing. Its been my experience with the shadow systems, that they over lube it in from the factory. When i take it to clean after shooting it for the first time normally has alot of lube in the striker channel. I even had light strikes once on the mr920 and twice on the cr920xp
@Thirsty_Tree
8 күн бұрын
Crazy that a company can copy the work of Glock pistols and it fails due to too much lubrication.
@kenjihiten4865
8 күн бұрын
I mean, I guess one or two light strikes within break-in period is a failure *shrug*
@JackKerley-cu5vk
5 күн бұрын
I agree they are usually over lubed from the factory. For that reason I field strip clean the factory lube off and re lube with the right amount of lube in the right places before the first range time
@smokingdart
6 күн бұрын
I’m assuming one could also run aftermarket triggers in these frames? Say the 4311….
@dylanammons1952
8 күн бұрын
Lmao thanks man! I know I’ve been bugging the shit out of you about this video!
@glock316
8 күн бұрын
Which holster do you guys use for the 43x frames with rails
@ValeriBlomme-w7m
12 сағат бұрын
Cartwright Harbors
@OliverSophy-q9z
23 сағат бұрын
Deckow Well
@NenitaEbilane-d3g
17 сағат бұрын
Cristopher Square
@scottsears5156
8 күн бұрын
I had one but found it was really loose on my arc slide. So much that it rattled in holster. Went back to original lower.
@kentuckychorizo
9 күн бұрын
Nice, look great
@MegHaley-p5x
18 сағат бұрын
Hegmann Grove
@Stingray2017
8 күн бұрын
I bought a SCT frame and fire control unit and after a couple of mags I had to use a punch and hammer to get the magazine out of the frame, guality is subpar and it is JUNK , don’t waste your time and money!!!
@SnakeNbake
7 күн бұрын
Damn. Ill pass. Thanks.
@MarkMarshall-t3x
Күн бұрын
Harber Mount
@cgbhc6667
5 күн бұрын
Funny how you have to put a grand into a Glock before it’s as okay as anything else. In this case, $40.
@spnfirearms
5 күн бұрын
A grand? Who’s doing the math? I have over 50 Glocks and most are stock. Why are you a grown man pocket watching and caring what other men do with their firearms? I’ll never understand it
Пікірлер: 44