I think husky should go back to a medal cage bearing for the 5 series saws
@shaner67
2 жыл бұрын
Way to lean on the up cut Donny.. Another strong build for a lucky fellow.. Head up and rubber down brother ✌️
@HenleyHenderson
2 жыл бұрын
Thanks for the heads up, got a new 550mkll a couple months ago awesome little saw, have the extended warranty so probably will leave it stock for now. That 550 there is definitely a cut above mine.
@Houseworksaws
2 жыл бұрын
I heard rumors of seal leaks on the 592’s as well. Mine will idle strange sometimes but on the other hand my 550xp MKII has been fantastic and it’s 4 years old. Heavy commercial use and never a problem
@230e4
2 жыл бұрын
I like how your handles turned out. I wish Husky would offer full wrap handles like on the 272, 372, 394/395 on all the 5 series pro saws. And Stihl as well, I always liked the OEM full wrap on the 064/066 (super hard to find), they help make the saw balance perfectly no matter how you hold the handle on those saws. A MS261 with that style of handle would be real nice.
@justinweaver8787
2 жыл бұрын
Agreed
@chriskennedy7262
Жыл бұрын
donny impressive work :)
@billybowen3023
2 жыл бұрын
Got me worried now! First 5 series husqvarna I'm wait for is a 550 mark2. Hope I don't get to much trouble 🙈
@richardf9137
2 жыл бұрын
Yeah use plastic cages to hold the bearings real SMART Husqvarna!
@jackcarroll4251
2 жыл бұрын
Talk about those tats Donny. Woooooooooo
@donnywalker4691
2 жыл бұрын
Do you mean my tattoos one is my race kart number 10 for 45 years of racing one soccer ball for my daughter she was awesome and the other walkers name mean saw with flames need to get my buddy Dan richly The best saw carver in Canada to re do it with new color
@jackcarroll4251
2 жыл бұрын
@@donnywalker4691 I love them boobie
@jimssawsnstuff8903
2 жыл бұрын
Hey Donny, good to hear Husky is going to look into it. For the 562, They just told me that 87 days run time is too far past warranty to cover, 30 days. There is an update for the flywheel side, bit nothing for thr PTO/ Clutch side yet. I think I posted the link for the Service Bulletin as well as part numbers I posted 3 vids of my most recent experience with their crank seals and bearings. Enjoy your weekend😎👍
@mmarja42
2 жыл бұрын
Sir, my h 550 mk2 got failed bearings within a month after purchase. Warranty of course covered the change of bearings, seals, no extra charge. In the shop they told me they also had to clean the spark arrestor mesh. After less then 10 liters of fuel ran through it, 48/1 mix. They never heard of it, that it can plug up in a MONTH.
@danielbutler8292
2 жыл бұрын
I had a clutch side bear go bad as well! Same issue that you are describing. They replaced my Mark II .
@joshuanickerson1108
2 жыл бұрын
Just rebuilt a 345fr brush cutter because the bearing cages blew aprat and took out the top end also
@Witschor
2 жыл бұрын
I‘m using this PS3 Chain on my 545 Mark 1 for about 4 years with a different Bar. That was before Husky came out with x cut which is no chisel chain . So i stay at 3/8 hobby Chisel from Stihl. It Cuts nice!
@jensenwilliam5434
2 жыл бұрын
Thank you Donny!!
@Rob-tl9md
2 жыл бұрын
How old are the bearings that are bad? Just picked up a new 2021
@user-zd2dl4tb6m
6 ай бұрын
Really cool saws. What is the part number for the bar being used here ? I can find a 24" small mount regular 3/8 but not 3/8 low profile. Maybe I'm missing something.
@justinweaver8787
2 жыл бұрын
Good work as always sir
@nurdinnurdin8542
2 жыл бұрын
Super
@ARCOFJUPITER
Жыл бұрын
That's.....what I call a siren sound to temp any man. I would do anything you tell me to if you gave me that saw. Anything.
@jamesmooney5348
2 жыл бұрын
I mean, I guess, they run okay???
@SlamPvP
2 жыл бұрын
what dogs have you fitted there? Thanks
@eddyarundale1566
2 жыл бұрын
👋
@eurokid83
2 жыл бұрын
Wonder if it’s a lubrication issue or a flaw in the bearing causing the failures? I just picked up a new 545XP never seen a drop of fuel. I’m hoping I don’t have issues with it since mechanically it’s the same saw as a 550.
@mackenziemullett3741
Жыл бұрын
I have a 550xp mark ll. Just lost the crank bearing on mine with only 40-50 hours on it. Warranty is covering it thankfully. Are you able to explain what you did with the muffler mod? Thanks
@SOHN32
2 жыл бұрын
Do the 550 have the same bearing as 500 I. If so maybe it a case alignment issue on the inside. Or is there other models using the same bearing. Or did they get a bad batch of bearing from there supplier.
@ScottishNZ
2 жыл бұрын
Do you sell the bigger dogs for the 550?
@donnywalker4691
2 жыл бұрын
No I made those I welded a different one to inner one and modded one for outer one
@Dfchainsaws
2 жыл бұрын
What’s your thoughts on 346xp ne vs 550xp mk2
@donnywalker4691
2 жыл бұрын
550 new generation of 346 I love 346 I’m building one for my daughter it rips ive built lots of them my favourite 50 cc hands down
@donnywalker4691
2 жыл бұрын
Don’t get wrong though I love 550 saws to but 346 my great friend grow Sweden help design it there special to me my dad used to run a 28 inch bar on his cut incredibly nice
@ironbound1984
2 жыл бұрын
Nice work Donny. Question, what are simplest things I can do to the most out of my MS362?? (no computer ). I Just got a Bark Box that I need to install. Anything else you could recommend? Thank you
@ScrewdriverTUNING
2 жыл бұрын
Almost at 6000 subs sweet brother. Great work keep them coming. Kindness and love one at a time .!!!❤️🔥🦾
@donnywalker4691
2 жыл бұрын
Why thanks it’s weird I don’t look at that I just enjoy teaching people stuff or showing what is is good to do🪵👍
@ScrewdriverTUNING
2 жыл бұрын
@@donnywalker4691 I know Donny. You are a fantastic fella. And your birthday is the same as mine. 💪🏻❤️🔥 I don’t usually remember birthdays. I’ve only know two humans with a birthday on the 26th. I’m also not that popular hehe. Have a great Friday friend. !!!
@cameronjohnson2306
2 жыл бұрын
How much would one of those custom saws run someone?
@cameronjohnson2306
2 жыл бұрын
Full wrap, porting and all
@twyke6818
2 жыл бұрын
Hi Donny I have a ms 400 stihl replying backing to you about port me a cylinder and piston thanks
@twyke6818
2 жыл бұрын
Hi Donny will you port me a cylinder and piston if I send you one? thanks
@donnywalker4691
2 жыл бұрын
What do you have
@BruceMyersLBZ
2 жыл бұрын
@@donnywalker4691 346xp ne with new oem 357 carb on the shelf
@Boost_Addict
2 жыл бұрын
Donny I Need me one of those full wrap handles bud lmk when you start selling em plz ! Just modded my 550xp mk2 with custom 562xp dogs and ceramic coated the clutch cover and handle . check out my chainsaw channel!
Пікірлер: 45