Avery, 3M and VVIVID are all different material compositions. They all have their advantages and disadvantages. We work directly with both 3M and Avery and the goal of all brands is to offer something different for their spot in the industry. That's why you get such different results using different materials and it's not just "Vinyl with glue". VViViD can make softer films but we've had issues with deterioration, cleaning, maintenance and pattern bleed from air-release. A stiffer film offers a more paint-like feel, easier to maintain and clean. It also cures adhesive flat over time where softer films take on the air-release impression. Either way, vvivid has great respect for Avery materials and I do believe they are closest to the "holy grail" of wraps for professionals. VViViD's focus is the end result. The finish is what drives our R&D. Thanks for the video and send us any questions you may have.
@ParadoxTheWrapper
5 жыл бұрын
VViViD VINYLS thanks for the comment. The material in this video under your brand name was purchased from amazon by the owner. All that old stuff needs to be taken off amazon cuz it’s giving you a bad rep. I think all your stuff on amazon is old and not as good as if it was bought from your website directly. I have used your material before directly from your site and it definitely was better. Still your material can’t be pushed into recesses because of the thickness the pull back force will overcome the power of the adhesive over time. I didn’t know that was the case or I would have worked into the recesses with no tension.
@PuffinFilmz
4 жыл бұрын
@@ParadoxTheWrapper I have had Vvivid wrap do the same thing even in small indentations and I was anal about making sure not to bridge the gap and lay into those areas. I post heated the whole thing also and after a few months all the indented body lines on a 2019 3500 denali bubbled up. Those body indentations are not even deep. Same thing with a G35 I just wrapped. I used 3M for all the body stuff and used Vvivid for the details of carbon fibre and tinted tails. The 3M stuff is holding up great but the Vvivid stuff is already fingering up and the tint bubbled in the recesses like on the truck. I did both front and rear in one piece with the 3M and stretched it into the front air ports and no fingering or pull back at all and its stretched waaaaaaaaay more than the Vvivid is. The tails are only slightly stretched in the indentations and still bubbled.
@Canongang
3 жыл бұрын
Just ordered some vivvid ✊🏽
@DanRoBurton
3 жыл бұрын
My wife and I are closer what you would refer to as amateurs although we have preferred VVIVID over other brands. We do still need to and want to try some Teckwrap.
@jaskarankhosa8157
2 жыл бұрын
Jheez vivid with the professional comeback…VIVID gloss black shits on everything. Maybe not paradox’s piano black but still
@dontbestupid6664
4 жыл бұрын
I love how honest you are with your work and the close ups.
@ParadoxTheWrapper
4 жыл бұрын
Thanks I’m just telling it how I see it at the time
@dontbestupid6664
4 жыл бұрын
Paradox The Wrapper we all make mistakes. Plus vivid is a piece of plastic garbage. I have used better Chinese film. You have to be expert level to install that without fingers or bottle caps. I have done it but it kills your work flow and more chance of ruining a panel. I prefer 3M and Avery all year round since I have a shop with AC. What bothers me about wrap channels is they don’t show you every corner and edge. They always hide something and I can see some fingers or “dust” in CKs videos and he doesn’t address them. Tries to hide them with the camera angle. Pay attention and you’ll see what I’m talking about. Justin pate removed an IG post when I pointed out his blade obviously slipped on the side of a hood and the old color was peeking through the jagged cut. Good job on the Avery product though. I’ll be lurking on your channel.
@seanprice7645
2 жыл бұрын
@@dontbestupid6664 vvivid is great. your business/shop is garbage lmao.
@407_ryan8
2 жыл бұрын
@@ParadoxTheWrapper not the most honest when he plays music over the sound of him burning up this mustangs clutch, i cant say i would do any better though
@civicmatrix1
2 жыл бұрын
Good work brother, I just completed my first wrap on my 94 cobra in vivid matte green and I see every error in paint and learned alot of mistakes that I came across. You make it look so easy but it is a large learning curve and skill to get a clean finished product for sure.
@thethunderxi
10 ай бұрын
I'm doing the same color for my 96 civic hatch tmrw, wish me luck
@Stephen-ut5xo
2 жыл бұрын
What is the best wrap techwrap, vvivid or something else when it comes to affordability and durability longevity?
@trig8364
4 жыл бұрын
vvivid is just sitting there like 'wait why would you do a wrap in the cold?'
@ParadoxTheWrapper
4 жыл бұрын
Because can use other brands in the cold lmao
@PunkinRB
4 жыл бұрын
right? that's like trying to paint your car outside on a windy day
@tammywalton2199
3 ай бұрын
Omg the color 🔥🔥🔥🔥👍🏾
@jheffryflores426
3 ай бұрын
What size of wrap u bought to wrap the whole car does 10ftx5ft works or do i need a bigger one
@comolohago7116
3 жыл бұрын
Excuse me, where can I buy that vinyl and what is its price? 
@ariana06tangi
5 жыл бұрын
Dude that goes for any film they have to be installed at a certain environment/temperature
@ParadoxTheWrapper
5 жыл бұрын
Junior Tangi not Avery and Teckwrap u can do it in any weather
@juandontworryaboutit4150
4 жыл бұрын
@@ParadoxTheWrapper depends where you buy em from, ebay and the "real deal" or sometimes from knockoffs that might look legit
@teammillion2
3 жыл бұрын
Idk bro haven't even watched this video yet and even in cooler temps the vvivid blows up alot easier than other wraps
@jreyes8614
4 жыл бұрын
why did you put red tape before? or is that pain?
@rogersrailroadproductions9185
4 жыл бұрын
How much torque you got on nem chicken cuh???
@hammertrue3356
2 ай бұрын
Okay so how long did you leave this wrap on for
@sorrowdada
5 жыл бұрын
How do you deal with 3m glue lines and all that, I think Vvivid handles them better than 3M and also what do you think could be best brand for you?
@ParadoxTheWrapper
5 жыл бұрын
DaNiDD0213 yeah the 3m glue lines are a pain. You basically have to heat it and let it relax then lay down with no pull to not have any glue lines. I prefer Teckwrap because it’s good quality and cheap.
@badfish9437
5 жыл бұрын
I'm wrapping my 2013 5.0 but am running into issues with my front bumper having those deep pits for the foglights at the bottom. Any tips?
@ParadoxTheWrapper
5 жыл бұрын
Logan H gotta use inlays bro
@badfish9437
5 жыл бұрын
@@ParadoxTheWrapper did you use two separate in lays on each side at the bottom? That's what I thought about doing, but wasn't sure if one in lay would work
@zuesthaking2339
2 жыл бұрын
How much wrap it take to do a full car
@Noahlochner0
3 ай бұрын
What Avery color is that?
@mylesondrums
Жыл бұрын
Super random, but what front lip is that?
@erikanovember9485
2 жыл бұрын
@paradox what's the best wrap for places that change temp alot I live in colorado
@AyeItsJohnny_
2 жыл бұрын
Avery
@jaskarankhosa8157
2 жыл бұрын
im in canada activley wrapping vivid in winter time no heater in garage..
@theautobarber9403
2 жыл бұрын
@@jaskarankhosa8157 lol I've seen Avery finish on a video that looks so orange peely
@kareym6817
2 жыл бұрын
What would be the best glossy black viynl you would prefer ?
@ParadoxTheWrapper
2 жыл бұрын
ParadoxStyling.com I only wrap in my brand now
@kareym6817
2 жыл бұрын
@@ParadoxTheWrapper Congratulations
@kareym6817
2 жыл бұрын
@@ParadoxTheWrapper one more question. I’m looking at your website now. How many rolls of wrap would I need to cover a 2020 Camaro ss
@tenseikwam7923
Жыл бұрын
Honestly I’d it bad that I like the multiple greens ? Lol finished work looks immaculate!
@user-hp1es8on9y
3 жыл бұрын
How many feet do you recommend if I want to wrap a regular sized car
@Werk4Cash
3 жыл бұрын
At least 10 feet
@CesarSanchez-oi2jn
3 жыл бұрын
@@Werk4Cash you mean Atleast 60 ft
@erikanovember9485
2 жыл бұрын
@@CesarSanchez-oi2jn if its your first time get 75
@CesarSanchez-oi2jn
2 жыл бұрын
@@erikanovember9485 that’s a lot lol but yea room for mistakes 🤙🏼
@rellyrell2159
3 жыл бұрын
Question what Sq ft do I need for the mustang
@erikanovember9485
2 жыл бұрын
like 75 linear feet so sq feet would be 75*5 375 SF they sell by linear feet or yards though. 75 linear feet is same as 75/3= 25 linear yards
@BigChilling.
2 жыл бұрын
metrostylinbg is better than vivid?
@teflonteddy5512
3 жыл бұрын
That shit ripped like a calendared vinyl.
@ctoeasy6960
3 жыл бұрын
Hey paradox I recently wrapped my hood in Vvivid xpo black 3D carbon fiber and it actually came out pretty good and it eliminated the bubbles there’s a couple nicks in it because it’s my first time ever wrapping but not to bad but now that I’m on youtube I see lots of bad reviews about vvivid and I’m wondering if I should take it off or just see how long it lasts, because I plan to do my fenders in carbon fiber but i think it would be best to buy from Avery. Should I stick with one brand? Or should I go ahead and buy the Avery for my fenders? What would you recommend?
@drewilson2520
2 жыл бұрын
Any update?
@MenaceWrapped
2 жыл бұрын
Is avery good to use in the cold?
@jaskarankhosa8157
2 жыл бұрын
vivid is good too... I'm wrapping gloss black in winter right now
@flooddastreetradio248
5 жыл бұрын
WHERE CAN I BUY AVORY WRAP BRANDS FROM......CAN U SEND ME A LINK????
@ParadoxTheWrapper
5 жыл бұрын
D.j. Guttah Boy the links are in the description
@flooddastreetradio248
5 жыл бұрын
Do you have a contact number I got a couple of questions because I am a first DIY vehicle wrapper. I was going to buy a flip flop vivid wrap, but by looking at your video you suggest a avory wrap. What is the durability compared to a regular paint job??? Does it last longer??
@flooddastreetradio248
5 жыл бұрын
what do u suggest?????
@ParadoxTheWrapper
5 жыл бұрын
D.j. Guttah Boy message me on Instagram @paradoxstyling. Buy Avery from metrorestyling if you are doing it for the first time.
@californiatints3350
Жыл бұрын
Paradox in the beginning
@VaxiEdits
5 жыл бұрын
Isn’t the same if I get it from amazon that brand
@ParadoxTheWrapper
5 жыл бұрын
PrAz Galaxy Amazon stuff is the worst stuff. You are better buying it directly from the companies website
@VaxiEdits
5 жыл бұрын
Oh okay I got you. 5x75 is more then enough to wrap a full car like 4 door
@VaxiEdits
5 жыл бұрын
Or do u think 5x50 will work
@ParadoxTheWrapper
5 жыл бұрын
PrAz Galaxy yes 75 feet will be enough
@juandontworryaboutit4150
4 жыл бұрын
@@ParadoxTheWrapper im not gonna lie bro i did in fact tried from Amazon that was about $15 for 2ft X 5ft carbon fiber wrap and it came out very good for being my first time, i only did the interior of my BMW 09 328i Ended up ordering another 6ft x 5ft for 35$ and im going to wrap up the hood but seems like i gotta wait for weather to clear up, bee snowing and raining couple days ago, anyways thanks for video helped me out subbed and liked peace!
@shufflerclaw
Жыл бұрын
damn i miss those gas prices :(
@HammadKhan-wv1lj
4 жыл бұрын
I m from Pakistan I want to be ur student. Can u provide me visa to come u
@santoroproject8753
3 жыл бұрын
this guuyyyyy
@spyderhex
8 ай бұрын
Hey i have a suggestion.. When you arent wrapping cars, brush up on your audio mixing. You are all over the place and those of us who have decent speakers dont like waking those around us. Not trying to be petty.. its really bad dude...
@durban23496
5 жыл бұрын
What's that smell?
@tayminkane3678
4 жыл бұрын
Dylan chicken shit
@joshderish5909
3 жыл бұрын
So vvivid is no good
@scubasteve2347
3 жыл бұрын
Vivid is not a bad wrap. It comes down to prep and skill level. As far as him stretching on the roof. That’s not the wrap. That’s the installer. Never stress the wrap at the end of it. I would never get my stuff done by this dude.
@joshderish5909
3 жыл бұрын
@@scubasteve2347 ok I've never done it and found a great deal on the cor unwanted from vvivid..butbhere so much up and down about it
@dnawrapsatl
3 жыл бұрын
Vivvid isnt easy, but end result looks great
@joshderish5909
3 жыл бұрын
@@dnawrapsatl thanks ..I've got most my car done ..lil flaws on each one but its ok ..its myb1sr one ..the bumpers are what scare the hellnout of me lol
@dnawrapsatl
3 жыл бұрын
@@joshderish5909 bumpers can be tricky, just run inlays or watch ckwraps inlay videos and if you cant make it into that section without an extra piece or you cut short, just throw an overlay in that spot, in some way that will make sense and flow with the panel
@no_handle_required
3 жыл бұрын
the 90's called, they want their cheesy neon back. Way to rice up a stang.
Пікірлер: 90