This was, by far, the best presentation of this project. Video was clear and instructions comprehensive.
@danielshalduha2158
3 жыл бұрын
@2phast Purchase two Sylvania LED Load resistors; one for each side. Attach one end of the resistor to the (+) wire that you cut, on the vehicle side... And ground the other end. Will fix your bulb out indicator by simulating the presence of a bulb. These resistors get warm, so will need to be mounted to a metal surface. Hope this helps. Found this video after watching your Barking Spider review... And happen to be a VW enthusiast!
@2phast
3 жыл бұрын
Appreciate the tip. Will give it a try.
@SwAgTeE1312
3 жыл бұрын
I have a eos 2006 and coded it within Vcds without mods ! :)
@2phast
3 жыл бұрын
@@SwAgTeE1312 Sure, but not on US spec cars, not possible. Only cars that can be coded with VCDS for this mod are euro spec cars.
@amsterdamrico
3 жыл бұрын
@@SwAgTeE1312 do you knwo the codes for it i got a 06 to
@valentingheman3357
2 жыл бұрын
Very useful, great video Mr! Could you please let me know the type (code) of the small LED’s that I need to replace? I got few burnt on my tail lights. Tanks.
@2phast
2 жыл бұрын
I wasn't able to find any of these LED's. If I need them, I may just purchase a broken tail light and catabolize the LED's that way
@TrigguhDSpykey
2 жыл бұрын
Just installed the euro dark cherries on my US spec VR6. It seems the euro ones have only one black wire at the connector instead of the two on the US spec like you’re doing here. So immediately when plugged in I had the donut only for running lights, orange turn signals and the small side LED’s deleted with no faults in the system. I had watched this video prior and thought they would need coding or resistors but incase anyone is wondering you do not.
@2phast
2 жыл бұрын
Nice to know, if I can find some good euros, I will pick them up. Thanks for the info.
@misterlocapone6604
3 жыл бұрын
Great car
@cknick
2 жыл бұрын
Wouldn’t it be easier to simply black out the relevant leds? That way you’d have no dash light come on either…
@2phast
2 жыл бұрын
That won't work as the LED's are used not only for driving lights but for the brake lights. On newer models, this mod can be done via settings in VCDS, which I tried but are not applicable on a 2008.
Пікірлер: 13