I Love your style as far as you are not cutting the frame and air bagging those trucks
@TaekwondoFitForLife
Жыл бұрын
Wow, great job and thanks so much for all this as you are helping me right along with my “63” c-10! Great work as always Sir, you rock these old trucks for sure! Hey, you helped me with the American AutoWire install on mine, I’m finishing it up {wiring} and the kit is amazing isn’t it? Completely transform the wiring into expanded for other electrical add-on’s for later-on, nice kit from them. I’m setting mine up for shows this Spring, who knows might run into you one show? So, keep me informed as you rock these old trucks! Wonderful informative videos Sir, you help so much for the old truck enthusiasts like me! “Thanks much”😊
@kbtruck65blair64
6 жыл бұрын
Looking great, the new rubber really makes it closing the doors quiet and smoother. Thanks for sharing.
@ronster6656
6 жыл бұрын
More great stuff from the most magical one-car garage in the universe.
@crossmember343
6 жыл бұрын
Love this truck. Like the fact that nothing is over the top. A true clean runner. Thanks for the post.
@ozzstars_cars
6 жыл бұрын
Lots of time and sure hands. Nice progress, looking forward to the next vid. -Glen
@jeffroberts1834
4 жыл бұрын
Another great video sir, really glad someone turned me on to your channel. You make it all look like kids play
@AryDontSurf
5 жыл бұрын
The wire you used to get the dome light installed is actually the same wire that holds most of my truck together.
@willnotcomply5420
6 жыл бұрын
Nice work, the mrhevyshevy crew sent me here. Guess I'll be following this one too... nice work and thanks for sharing.
@Gibson63.
6 жыл бұрын
Will Notcomply Thanks for watching
@pappabob29
6 жыл бұрын
Whoever buys a vehicle from you does well. You are very thorough !! All this tedious "detail" work makes for a very nice tight, quiet, vehicle.
@TheShadeTreeFixitMan
6 жыл бұрын
Each step makes the truck a safer and quieter vehicle.
@wileygailey9553
6 жыл бұрын
All the little stuff makes for a nice project.
@johnnybsbasketcaseprojects3835
6 жыл бұрын
The weather stripping already having the adhesive in it was nice. Looking better all the time. Tie wire is always handy
@petermcauley4486
6 жыл бұрын
Great stuff !, from Australia, nice work brother... Doing a 55 3100 atm, you do it the RIGHT way.... Wife and I like your accent, "I'm gonna ......." 👍
@Gibson63.
6 жыл бұрын
Pete Mca Thanks for watching man good luck on the 55
@CamaroRick
6 жыл бұрын
This truck is turning out nice!
@w.w.oklahoma6010
6 жыл бұрын
I''m serious, I feel like I''m standing next to you in the shop learning from the master!!! Thank You!!! "w.w."
@rking674
6 жыл бұрын
Thumbs up. Great job as always.
@MrFireman164
6 жыл бұрын
Nice to get those little details done ✅
@MegaCountach
6 жыл бұрын
More great stuff! Cheers, Doug
@sharifsalem
6 жыл бұрын
Great stuff as usual. Might tackle those wings tomorrow.
@lorenavalenzuela3572
6 жыл бұрын
Nice job as always I’ll like to see a video of that windshield get install
@jefflindsey9589
6 жыл бұрын
Good stuff Gibson!
@ericcorse
6 жыл бұрын
That cab will be looking new. I'd love to have a truck of that era but being 6'3" not sure I would fit.
@AryDontSurf
5 жыл бұрын
Youd be fine brother, theres not a ton of leg room but you have plenty of head space
@adriantomlin2902
4 жыл бұрын
@@AryDontSurf if you relocate the fuel tank under the bed, you will have both!!
@militarychevy711
6 жыл бұрын
Nice job man!
@BHbrewing
6 жыл бұрын
Vent windows are a pain to reseal but are awesome when done.
@punkinsgarageandpaint8299
6 жыл бұрын
You gonna have to build one for your son next. Have him help with the full build then surprise him when its done.
@Gibson63.
6 жыл бұрын
will have to see what happens after this one
@punkinsgarageandpaint8299
6 жыл бұрын
Gibson63 well don't stop... I truly enjoy learning this and you do a great job in teaching us this..
@Tobeythebeagle
6 жыл бұрын
Where are you getting your parts?LMC or Brothers, or both?
@doughboy1966
6 жыл бұрын
Be as tight as a new truck when you get finished with all that felt and rubber.
@jadensjourneys144
5 жыл бұрын
Hello Mr Gibson! I am very interested in your videos since I have bought a 62 chevy PU. Im having trouble finding these in order, it doesn't matter too much I guess ill figure that out lol great videos thank you so much for sharing !!!
@Gibson63.
5 жыл бұрын
Just go to my Channel and clicked on videos they will be in order
@zzzdogutube
6 жыл бұрын
you make it too easy. thanks
@augustadarrell
3 жыл бұрын
Where did you purchase the rubber floor mat and door seals from?
@familymann1956
6 жыл бұрын
Damn me Gibson your out there late I see! That white I’m telling you what ya gotta have clean hands all the time
@sergioaguilar8178
4 жыл бұрын
Great video! Quick question: the dome light wires you fished them down in the gas tank area. Where did you get you get power to them and where did you hide them? Thanks! I have a 57 need to install the dome light currently don't have one.
@vandervan22
4 жыл бұрын
They run under the floor mat to the clip coming off the fuse box , same light in my 66
@keithdawson3436
6 жыл бұрын
Awesome work your videos definitely helping with my project. Who's door weather strip you using? Thanks
@Gibson63.
6 жыл бұрын
Keith Dawson went with precision on the weatherstrip
@familymann1956
5 жыл бұрын
I got a problem man I had my doors all good and adjusted and then I installed my weatherstripping and my damn doors wouldn’t shut I gotta readjust my doors
@Gibson63.
5 жыл бұрын
I had the same problem with mine that I got from classis parts then I went with a company called (Precision parts oe replacement weatherstrip kits) the rubber fit a lot better
@luckautofab4461
6 жыл бұрын
Looking good, I came across your videos a few months back, when i was looking into repairing door bottoms on my ford truck, most say you do some nice work, What's your background on body and paint?
@Gibson63.
6 жыл бұрын
Kevin Luck Never done paint and body work before until I started my red c10
@luckautofab4461
6 жыл бұрын
Gibson63 dang that's impressive
@adelaideinvigilation5230
6 жыл бұрын
Can you retrofit a larger single piece of glass in the frame?
@Gibson63.
6 жыл бұрын
Adelaide Invigilation i’ve seen trucks with full glass in these openings so it can probably be done
@tatekieto87
2 жыл бұрын
i have a stupid question can i us the passenger side sun visor bracker in the driver side ? what is the difference?
@Gibson63.
2 жыл бұрын
Don’t really know on that one I’ve always tag mine when taken them off never tried to swap
@tatekieto87
2 жыл бұрын
@@Gibson63. thank your for you answer lmc truck has only the passenger side I was going to by 2 of the same and just turn the rod the other way lol. will buy them on classic industries for 10 bucks more smh... love your videos man they have helped me a lot.
@chevybob9836
5 жыл бұрын
What brand of shifter are you using for the transmission? Thanks for the info.
@Gibson63.
5 жыл бұрын
B&M shifter
@eddiegomez3357
Жыл бұрын
Did u have to drill holes for armrest? My 61 doesn’t have for an armrest
@Gibson63.
Жыл бұрын
The holes were already drilled on this truck and had the clips on the back on the door, not to sure on the 61
@eddiegomez3357
Жыл бұрын
@@Gibson63. thank u for the reply. U got good videos. I think mine already has the springs on the back that lowered it 4 inches do they happen to have for 6?
@Gibson63.
Жыл бұрын
@@eddiegomez3357 I think the armrest location was drilled for one spot, but you can modify and lower it I’m sure
@eddiegomez3357
Жыл бұрын
Sorry I didn’t explain myself. I was meaning your 4 inch drop on the rear. Do they make a spring for 6 inch as well?
@Gibson63.
Жыл бұрын
@@eddiegomez3357 the 4 inch drop was a kit that I bought from Classic industries it came with everything I needed for this drop
@Tobeythebeagle
6 жыл бұрын
Where are you getting your parts?LMC or Brothers, or both?
@Gibson63.
6 жыл бұрын
Tobeythebeagle I’ve always stuck with www.ClassicParts.com for most of my patch panels, interior parts unless I can find an original part, and www.earlyclassic.com for all my suspension, and www.mar-k.com for side molding, trim and bed parts
Пікірлер: 65