yes they can..you whistle or keep a steady tone and then see if the exact freq comes out,it will read 1.5 kcs down or up from center
@R4002
12 жыл бұрын
I have the red LED version of this counter on a Superstar GR (President Grant Export). Great counter, nice review!
@johncarr7684
3 жыл бұрын
Can you use this inline with a radio all the time or just use for the bench, working on radios ?
@jbuloke
6 жыл бұрын
That's good for the bench instead of my huge frequency counter on my bench
@JoeR203
2 жыл бұрын
Are there any newer models out that don't require the tone for SSB?
@LeeKirkman88
10 жыл бұрын
I used to do this anyway inject a 1khz audio tone downloaded from the internet always gave a stable reading
@SFLightfoot
2 жыл бұрын
Hi, now that you got the frequency on ssb can I use my opened clarifier to slide left or right to slide properly on frequency and will it track or will I still have to inject the tone every time I slide
@chickenhawknwc
12 жыл бұрын
Can you measure modulated am frequency with this? great review, keep them coming.
@a2phil
10 жыл бұрын
Do I adjust the volume of the speaker by keying up the mic and using it on sideband until I got a stable reading? Otherwise, how would I know if I needed to turn the volume up or down?
@m35a2lover
11 жыл бұрын
What if I want to use it in the Mobil ? Couldn't I just pick up a power cord that plugs into my trucks ciggarette lighter plug and then into the back of the counter ?
@soldierloz
Жыл бұрын
Does the counter work on FM?
@MrCgooden
6 жыл бұрын
Where can I purchase the tone generator shown in this video?
@w9x7cv3vg6
2 жыл бұрын
plus all u need to do is transmit on am to see where your at.
@johnnybagwash2456
10 жыл бұрын
THAT COUNTER SOUNDS DOSEY TO ME
@madmax2069
8 жыл бұрын
I'd rather modify the radio and install a frequency counter that shows receive and transmit
@cidizzle
7 жыл бұрын
links to do that?
@globalmobile017
5 жыл бұрын
Needs more digits for sideband
@markvincent9883
2 жыл бұрын
So you need 3 hands
@Radionut
8 жыл бұрын
On a six digit frequency counter what is that six digit supposed to be if you're on less safe channel 19 or 27185. Should that six digit be a zero or a five
@Mister22x2
8 жыл бұрын
Zero. 19 = 27.1850
@Radionut
8 жыл бұрын
+Jim Verge well that's a vote for zero yesterday I had several votes for five
@Mister22x2
8 жыл бұрын
That's funny. People said 5? Really? I've been in radio and had a repair shop from 1980's until 2007. All of the CB Frequencies read out to a Zero in the 6th digit. Here's a good reference. www.radioreference.com/apps/db/?aid=7731
@Radionut
8 жыл бұрын
+Jim Verge thank you for the link. You were talking about being in the radio business since the 80s well these people that are telling me five I've also been in the business since the CB boom which was in the 70s. So you know six of one half dozen of another I don't know
@Radionut
8 жыл бұрын
+Radionut R correction should say and not ive been in the business that should say they have been in the business
@blur1ss
12 жыл бұрын
how many watts input can it handle?
@pliniolever
6 жыл бұрын
blur1ss 500 w
@wayne487msc
10 жыл бұрын
Worthless counter. It reads a new frequency only when you hit reset. Can't use it to monitor a VFO as you dial around or to monitor drift.
@chris2crazzy
10 жыл бұрын
So if your clarifier is opened up it won't read where you slide to that sucks
@Radionut
8 жыл бұрын
I don't quite understand what you're saying. So you are saying that if you have a radio that goes between frequencies like the a channels it won't read it
@oldrango883
2 жыл бұрын
It’s not for receiving, I mean what are you doing? Staying keyed down while you roll the band?
Пікірлер: 36