Very good video. That looks like exactly the machine I need.
@cathyhogenson3930
4 жыл бұрын
Bad ass wood chipper you guys have
@mrtree1368
3 жыл бұрын
4:30 pretty much perfect example of the kind of work a laborer will give you complete mindless use of a machine
@robertsileo8336
4 жыл бұрын
has this person ever run a machine before
@Gunnypauly73
4 жыл бұрын
He must not want to be there, looks like he trying to kill it
@hbmarcott
7 жыл бұрын
I own one of these , last years model a little different looking. They will be on the phone telling DR Power. I don't understand why the clutch and drive belt is worn out, it's a brand new machine. I will admit though, sometimes the machine will grab a hold of a larger branch an pull it out of your hand and will lug the engine a little bit. But I have never had mine stall out like that. He was shoving the branch in an not giving the machine a chance to recover.
@gnurmi
6 жыл бұрын
They're self feeding and advertised as such, so they're designed to let go and let the machine take it.
@BobSmith-qi5di
5 жыл бұрын
@@gnurmi yes but they were putting bigger branches then what was supposed to go through it.
@stevew3978
6 ай бұрын
When users ram a thick branch into the chute, the engine slows down to the point that the centrifugal clutch will momentarily disengage, and then when the drum recovers speed again, the centrifugal clutch will re-engage. Repeated disengagement and re-engagement of the centrifugal clutch causes the clutch to overheat and is a primary cause of failure of these clutches. The moral of the story is don't repeatedly overload these chippers.
@hbmarcott
6 ай бұрын
@stevew3978 I have never had mine disengage the centrifugal clutch. My RPM has never dropped that far down. I've been using mine off and on for 7 years. I have never stalled it out.
@duke6024
22 күн бұрын
@@BobSmith-qi5dinot true
@DEANO166
2 жыл бұрын
Can you make a note as to which model chipper this is? DR Makes several.
@stevebrendap9600
Жыл бұрын
How big of tree or pile of trees did you start with?
@cathyhogenson3930
4 жыл бұрын
A some day for you guys
@noneofyourbusiness8092
4 жыл бұрын
Needs an low end torque engine ,like a diesel.
@stevehartz4615
8 ай бұрын
Briggs n Stratton get it done.
@vclubamp
5 жыл бұрын
That clutch costs about $300. I'd avoid slipping it so hard and long if I were you. Give it recovery time.
@to-oe1oq
3 жыл бұрын
It's an extreme testing lol
@mindvoyager2476
6 жыл бұрын
what model dr is this?
@kennynickel267
5 жыл бұрын
I have a chipper the dr 11.5 4 inch and from day one I have had to hand feed the branches in and anything at 4 inches it will burn the cutter
@BobSmith-qi5di
5 жыл бұрын
Have you checked the blades? They may need sharpening or replacing. Also is that the chipper or chipper shredder?
@kevinkollman9162
4 жыл бұрын
80,000 views and not too many people cared to give a thumbs up or down. I bought a 4 inch chipper' 3 point for my 30 hp tractor and the main chipping wheel was warped' they didn't even respond when I e-mailed them //
@duke6024
22 күн бұрын
Yes there customer support is troublesome I went on X and messaged them they responded and I emailed they responded. Phone support forget it.
@shoptalkwithbrett6572
6 жыл бұрын
by the time this guy's done with it it's not even gonna be able to even be used as a coffee grinder the way he's force feeding it over sized logs. It's a single cylinder homeowner chipper Not a Bandit 1390XP: tree servce machine.
@Boodieman72
4 жыл бұрын
You can't always afford a pro level machine when starting out.
@BobSmith-qi5di
4 жыл бұрын
These machines can take alot of abuse the knife on them are similar size and same material as what a small vermeer has.
@matthewtaylor2185
3 жыл бұрын
@@BobSmith-qi5di yes, but there just isn't as much steel around the knife and the housing as a professional machine.
@matthewtaylor2185
3 жыл бұрын
@@Boodieman72 if you cant afford the best, you for sure have to learn to take care of what you have.
@ExploringCabinsandMines
6 жыл бұрын
Are you trying to break it?
@mohammedkhidr5399
6 жыл бұрын
how can i contact with supplier of this machine?
@mohammedkhidr5399
6 жыл бұрын
Ok
@kennynickel267
5 жыл бұрын
I also want to ask why the company didnt put 2 cutters on the flywheel the motor isnt strong enough to handle 4 inch wood
@jamesedwards2726
5 жыл бұрын
You know there is always a place in the market. You should design one and sell it cheaper than a dr lol
@Crazytownmetal6
10 ай бұрын
Tough machine.
@MrBillmechanic
5 ай бұрын
junk!
@duke6024
22 күн бұрын
@@MrBillmechanicat least can do more than the 3" chute chippers. What would be better in this class
@ronniebaxter5219
2 жыл бұрын
Nice video, some narration would help though.
@CS-hd9xu
2 жыл бұрын
I have nothing to pull it around. Do you think people could move it without anything
@INFL3GACYOFFICIAL
2 жыл бұрын
Yes, it's not that bad when pulling around on a flat surface. You might need some help on slopes though but it's not too bad.
@andyspoo2
5 жыл бұрын
Reviews with no model number, no web link, no address are pretty useless.
@rolandoriggio5026
7 жыл бұрын
Is this highway towable?
@ExploringCabinsandMines
6 жыл бұрын
Rolando Riggio yes good to 100 mph
@kenville44
7 жыл бұрын
what model is this? im impressed where can i buy
@BobSmith-qi5di
4 жыл бұрын
I belive it is there 11.5 model with electric start go to DR power equipment you will find them there.
@duke6024
22 күн бұрын
@@BobSmith-qi5diI just bought a used DR 18 HP Vanguard
@diosdadonoay4058
7 жыл бұрын
kikilu
@HHSTT
6 жыл бұрын
Minigun. 8-)
@stevew3978
6 ай бұрын
hi, what model is this? What is the size of the engine?
@jackhadfield3943
Ай бұрын
Dr 475 420cc or 1650lbs
@cha-ka8671
2 жыл бұрын
Yeah, try a bit harder wood than conifers and we will really see if it can handle a 4"+ branch. I am not saying a DR chipper isn't a good chipper, I just wanted to see hardwood chipped.
@MrBillmechanic
5 ай бұрын
i have this macine. it is garbage. go with a power king !! dr is big ripofff. does not hold up!!!
@danburch9989
7 жыл бұрын
Just think of how much salsa you can make!
@larrabeejl
4 жыл бұрын
Now that would be an amazing video. You can make the pico by the bucket full.
@keith2915
Жыл бұрын
We did do that and it works great salsa by the 5 gallon buckets 🪣 your idea 💡 made us rich 🤑
@duke6024
22 күн бұрын
How many ho is his DR
@infinitycrops
5 жыл бұрын
I need a chipper shredder that shoots out the material on top like a chipper - not on the ground like most chipper shredders I’ve seen. Makes composting a lot quicker for my use case.
@BobSmith-qi5di
5 жыл бұрын
When they shoot from the top they are just chippers and are a lot heavier I know how ya feel I have been trying to use a little 6.5 hp mtd and these things are a beast compared to those.
@kennethlowe6337
Жыл бұрын
I have the Jensen gts pro 2000 14 hp Kohler commander pro. I can throw a 7 ft Christmas tree in it one after another. Only problem I had with it the discharge chute would clog if I pointed the nozzle down but you learn.
@waynetadlock9719
6 жыл бұрын
Wish I had one, so I could NNNNOOOOOTTTTTTT abuse it.
@valqueenofValhalla
2 жыл бұрын
I’ll tell you it’s not the pro xl501 the one I have and entered so I could see but hey wth
@juliosdiy3206
6 жыл бұрын
It def. Failed
@juangonzalez-qg6eh
3 жыл бұрын
ENGINE NEEDS more TORQUE 🤔
@duke6024
22 күн бұрын
Would chipper don't do torque
@jurgenritzhaupt5562
6 жыл бұрын
Keep force feeding your machine and it won't last a week!!!!!!!!!!
@TheEmilychurchill
3 жыл бұрын
Good old Briggs & Stratton engine they say that Honda is the best small engine right now on the market but if I had to buy an engine for a go-kart mini bike or anything stick with ol reliable the Briggs & Stratton engine made in the good us of a
@kimmomarlow4125
3 жыл бұрын
Briggs n Stratton of course and Tecumseh
@novagsi5302
5 жыл бұрын
One way to fuck up the chipper no common sense
@TheEmilychurchill
3 жыл бұрын
I bet one of those China engines those clone Honda engines with wouldn't even last a week doing that kind of hard work I'm talking about the China engines they're selling all over the place different colors red white green pink yellow white all kinds of colors they come in variety of colors I guess they use the colors to attract people into buying them and see how pretty they look and to get suckered into buying a China engine and it don't last them but a week
@kimmomarlow4125
3 жыл бұрын
Yea its pretty much what happens when you loan someone your tools.
@kimmomarlow4125
3 жыл бұрын
Predator engine from harbor freight?
@MiserableOldFart
6 жыл бұрын
That's a chipper. Has no shredder. Decent machine, but limited without the shredder function.
@BobSmith-qi5di
5 жыл бұрын
Who would want a shredder I had one of those cheap craftsman ones and it sucked these DR are the best for the price.
@yusufmoruf5675
4 жыл бұрын
@@BobSmith-qi5di Please send me your address I need the machine This is my number +4915129757085
@BobSmith-qi5di
4 жыл бұрын
@@yusufmoruf5675 I dont have one to give away I do have one for sale.
@yusufmoruf5675
4 жыл бұрын
@@BobSmith-qi5di I what to buy it how much you will sale it for me please
@BobSmith-qi5di
4 жыл бұрын
@@yusufmoruf5675 $500.00
@robsmith3106
5 жыл бұрын
Aren't these self feeding why waste time shoving them in when the machine can do it? I say throw some in and grab more way more efficient.
@duke6024
22 күн бұрын
Yes rapid feed u have some do t go in nice some go in nice and have to hold back to not lock up
Пікірлер: 86