What a inspiring boat, spectacular speed! Wish to some day have one of these. Put this together thought maybe someone would find it helpful. Overview of the video Tools 1:03 About the trailer 1:30 Launching the boat 3:09 The Swing Wing system 9:12 The mainsail 19:54 Reefing lines 21:41 Mainsheet 24:29 Lazyjack 25:30 How to take off the mainsail 27:44 Reefing lines 27:53 General information 29:29 Releasing mainsail from the boom 31:48 Taking off the lazyjack 32:57 Mainsail cover 34:48 Lower intimate car 35:33 Taking off the batten cars 36:21 Taking care of the batten cars 38:01 Top batten car 38:46 Headboard car 39:33 How to get the mast down 40:18 The mast buck 40:23 Mainsheet 41:07 Fix the reefing lines 42:07 The furler line 43:14 Block system 43:43 The mast base pivert fitting 44:39 How to move the boom 45:47 Placing the spinnaker hallyard right 47:45 Mast support poles 48:20 The rigging link for new boats 52:23 Summary before lowering the mast 53:50 Taking off the forstay 54:51 Lowering the mast 57:31 After lowering the mast 1:00:12 Preparing to move the mast forward 1:01:15 Deck cables 1:01:33 Mast supporter 1:02:42 Moving the mast forward 1:03:03 Before you start driving 1:07:21 How to raise the mast 1:08:09 Preparing to move the mast 1:09:31 About the for-/backstay and hallyards 1:14:40 Fix the boom to the pivert fitting 1:17:16 The mast support poles 1:18:28 The block system to raise the mast 1:19:29 Rasing the boom 1:20:15 Raising the mast 1:23:41 How to put the forestay in position 1:29:22 The rigging link for new boats 1:31:37 Taking the mast support poles off 1:32:13 How to move the boom 1:33:09 Things to be aware of 1:34:15 How to put the boat on the trailer 1:35:32 About the trailer 1:35:37 How to put the spanners on 1:46:16
@jtechie3
7 жыл бұрын
Very good explanation of the AMA not collapsing while sailing i have always wondered how they lock in!
@opal177
8 жыл бұрын
Wonderfully detailed instructions. A pleasure to watch a knowledgeable man.
@stevenhs8821
4 жыл бұрын
Just guessing, but I believe he is a manufacturer's representative.
@cockysteps
2 жыл бұрын
@@stevenhs8821 he is the founder!
@stevenhs8821
4 жыл бұрын
Can you motor this boat with amas in and mast down, like through a canal system?
@Clickumentary
3 жыл бұрын
I would be interested to see how this folding system compares to my Corsair. I've always disliked having to thread a bolt to secure the ama beams, although this looks like a bit more to think about.
@gregorydamario7977
Жыл бұрын
Really like the boat. I want one. But I have some concerns about the launching instructions. "Make sure the boat is centered, because if it is not, it gets complicated". OK, Einstein. What if the boat becomes off center? What does one do about it? Should I just go to the stern, pick it up and move it back into place? Does that uncomplicate the problem? Silly me. Answered my own question. Also, how powerful of a vehicle do you need to not only haul this boat around, but to pull it out of the water, uphill, on a ramp, or driveway, or over the hills between your house and the water, but mostly up a ramp? I will bet money that my Prius is not going to do the job. So, now I have to buy a towing vehicle that adds to the cost of the boat. So, if one needs to purchase an adequate towing vehicle (plus insurance, maintenance and fuel), that you would not otherwise need for daily living, that adds to the cost of the boat. Oh! How much does the trailer cost? So, what is the real cost of owning and operating this magnificent sailing Porche of the seas? My thought is that many of the people who could afford the boat, could not afford to use it. Sad, 'cause it is a wonderous beast.
@TheAegisClaw
Жыл бұрын
This is a $200k boat. Nobody is towing it with a Prius.
@horsey8516
Жыл бұрын
Is the mast support piece is a bow pulpit seat? If not, why not? 🐴
@4444erima
8 жыл бұрын
Hallo Jens Das Video finde ich sehr Informativ. Vielen Dank. Was ich noch vermisse! Wie fädelt man die Lazy Jack nach dem aufstellen des Mastes wieder ein? Vielleicht magst Du mal ein Video über den optimalen Segeltrimm machen. Währ doch ein neues Projekt. Freu mich auf unser DF28139 Pervormance :-)
@blitzercar4339
8 жыл бұрын
Du Glücklicher ;)
@vplph
3 жыл бұрын
with dragonfly trimarans the wind starts to blow when you hoist the sails...
@GLLHamp
3 жыл бұрын
They should have the owner or designer of these boats do the demonstration.
@ozskipper
Жыл бұрын
Fantastic and well thought out boat.. But damn that trailer winch is torturously slow.. For the amount of money the boat is worth its a bit of a silly cost cutting measure not to have an electric winch with some decent torque.
@dennismcquoid9751
7 жыл бұрын
Provided no overhead obstructions, can you trailer the boat with the mast up?
@gilesgoldsbro5816
7 жыл бұрын
In the parking lot, Yes, maybe. On the road? You must be crazy!!
@AntonHu
4 жыл бұрын
Thanks for making the video, it's thorough and reassuringly presented. But please get a native English-speaking sailor to edit your sub-titles :-) Regarding the rigging, I think they'll agree with me that while some people call them side-stays, most call them shrouds (on both sides of the Atlantic), but that's a minor point.
@andyvan5692
8 жыл бұрын
nice video, But when you raised the mast you forgot to re-reeve the lazy jack lines to the pulleys on the spreaders, no wonder you didn't show putting up the main! but at least you showed how to take both the sails down, Not many trailer yacht videos show us this when rigging masts, Thanks:))))
@gilesgoldsbro5816
7 жыл бұрын
Better microphone and wind noise baffle would be useful, even though wind is nowhere in evidence.
@6800891
2 жыл бұрын
Too bad they are prohibitively expensive.
@timr9752
3 жыл бұрын
Great boat. TERRIBLE music. Please skip the crap. We don't need to be entertained by music while watching a boat launch. If we're watching a boat launch...... really..... we don't need cheap music to entertain us.
@rogerspinks3142
7 жыл бұрын
Painful explanation to watch just watch a Corsair Tri video and you will see what I mean.
@ppapdddar6159
3 жыл бұрын
How on Earth bolting/unbolting bolts in the arms of the side hulls is better or faster than this?
@Clickumentary
3 жыл бұрын
@@ppapdddar6159 I had a Corsair for a long time and always hated the bolt / washer to aka beam fitting. And, from experience I can tell you they always get loose after a weekend on the water.
Пікірлер: 25