Love the video and your set up! You probably already figured this out but I'll suggest it just in case. You should open your feed valve just a bit and leave it open, watch your sap level and adjust to keep it around 1.5 - 2 inches. Add to your preheat pan as needed and trickle finished syrup out as it gets close to temperature. By using this method, you will keep a steady boil going and be far more efficient. Happy sugaring, keep up the good work! Smoky Lake rocks!
@sugarshacknation2644
3 жыл бұрын
Appreciate the advice!! I don't keep it always open because the propane setup I had didn't boil it off fast enough. This year went with a new wood arch so it should work as you suggest...
@BissellMapleFarm
5 ай бұрын
Nice!
@awjoyce1
3 жыл бұрын
Clearly explained, great video. I'm hoping to get a divided pan like that at some point
@Well_I_am_just_saying
3 жыл бұрын
You should include the link to the next video in your description for this video. I think I see it in the recommended list, but you should make it easy for people to find your next video. You have an excellent set up there and it sounds as if you know what you are doing.
@darcyscott2406
3 жыл бұрын
Nice setup! From Northern Vermont
@devmeistersuperprecision4155
6 ай бұрын
From Topsham VT
@craigguilmet6282
2 жыл бұрын
Nice setup.
@nikiespy6722
3 жыл бұрын
Awesome, really helpful to see the process
@terrybrown9206
2 жыл бұрын
Good advice
@terrybrown9206
3 жыл бұрын
Good video,good equipment.thx
@802louis
2 жыл бұрын
Nice job 👍
@dadu63
2 жыл бұрын
We make molasses here in NC like this. Good video!
@MH-qb9ev
6 ай бұрын
We make maple syrup in NC too ;)
@rogersavoie4570
3 жыл бұрын
Nice and informative video but as you know,you should adjust your thermometer at least every day, as the atmospheric pressure changes all the time, and it affect the boiling point temperature.
@sugarshacknation2644
3 жыл бұрын
That is good advice and i try to but most of the time the sap is covering it ....
@kentshoemaker7764
3 жыл бұрын
@@sugarshacknation2644 I suppose I should give my evaporator thermometer more attention, but there are so many other indicators that we watch ; viscosity, taste, etc. We boil it to where it is getting close to syrup, but finish it off on a propane finishing pan or our stove. We pay real close attention at that point.
@terrybrown9206
3 жыл бұрын
I hope to do some sap boiling,and produce some maple syrup next year.
@aaronpalmer5782
Жыл бұрын
Do you have a video of what the burner serup is like under your evaporator?
@billchriswell2925
3 жыл бұрын
👍just came in from 10 hours of boiling...where’d you get the 7 gal pot? I need one of those!😁
@sugarshacknation2644
3 жыл бұрын
It's a Bayou Classic. Ordered it online...
@diegolucero8761
3 жыл бұрын
Nice hat bub!
@sugarshacknation2644
3 жыл бұрын
Thanks Diego. Came from originalmaine.me
@lbohen
Жыл бұрын
I like the finisher pail. What brand is it? Where did you get it?
@sugarshacknation2644
Жыл бұрын
I bought it online. It is an 8 gallon stainless stock pot. Spout on the bottom. This brand is Bayou Classic...
@thomaschambers5711
2 жыл бұрын
Great video. I was wondering though, what do you do with the unfinished sap left in the evaporator?
@sugarshacknation2644
2 жыл бұрын
I keep adding to it during the season...
@thomaschambers5711
2 жыл бұрын
@@sugarshacknation2644 Okay cool… so no need to clean it out every time you use it?
@sugarshacknation2644
2 жыл бұрын
If I know I'm not going to boil for a couple days due to weather, I will empty the pan into a bucket and give it a quick wash out then add it back in when I get more sap and ready to boil again.
@robertsimon9900
Жыл бұрын
Do you sterilize your glass bottles and lids. I have new bottles and lids.
@sugarshacknation2644
Жыл бұрын
You always want to use new lids. If I reuse bottles I will boil them for about 15 min. If using new bottles I will use them out of the box. Then I fill the bottles at 180 degrees, cap them, lay them on there side. This process sterilizes them after you fill them. Hope this helps.
@douglarson9687
3 жыл бұрын
Where did you get your evaporator? What was the price for just the evaporator,no bottom burner.
@sugarshacknation2644
3 жыл бұрын
Evaporator pan is a Badgerland Mapleworks out of Wisconsin. Great pan. Visit there website, they have all sorts of sizes and accessories.. I put it on a new WF Mason 2x3XL this year. You can see it in the new video.
@thomasbarnes1064
2 жыл бұрын
Where did you get your propane stand
@sugarshacknation2644
2 жыл бұрын
I made the stand. Since then I went with a WF Mason wood fired.
@dakotawilliamson1862
3 жыл бұрын
What is thw brand of your finishing pot, and where could I get one?
@sugarshacknation2644
3 жыл бұрын
@dakotawillamson It is a Bayou Classic. 8 gallon stainless stock pot. They come in different sizes. Anywhere online carries them. Make sure you get one with the valve...
@dakotawilliamson1862
3 жыл бұрын
@@sugarshacknation2644 Thank you!
@pearsc5d
2 жыл бұрын
You are boiling after filtering,that defeats the filtering.
@sugarshacknation2644
2 жыл бұрын
When I'm filtering out of the pan it's more as a pre filter. Then I boil it down in a pot to get the consistency right wher I want it. Then filter it to bottle it...
@bencote2219
3 жыл бұрын
Is your shop vented? Notice you’re using a propane burner inside, might start to feel a little funny!
@sugarshacknation2644
3 жыл бұрын
It has an 8 foot cupola with windows that open. plenty of fresh air drafting through...
@awjoyce1
3 жыл бұрын
If it wasn't, you'd be in a sauna pretty soon with all that evaporation!
@edjharris1
Жыл бұрын
Not a big fam of the gauge boiled for over 8 hrs 50 gallons never did hit the 7
@thomashadwen6864
3 жыл бұрын
Jesus loves to save people from their sins. Thank you for the video I hope you know Jesus then I will see you in heaven one day. Cheers
Пікірлер: 45