A year ago, a man was walking in the woods. And found an old rusty ax. He turned to me with a question - is it possible to restore this ax, or is it better to throw it in a landfill? Seeing this rusty shard of history, I decided to get to work. Inspiration came to me. I decided to do something Viking style. Here's what happened in the end.
The drawing on the ax was made by electrochemical etching (using a welding machine) and etching in a 5% solution of nitric acid. I wish you a pleasant viewing.
This video is not instructional. Everything shown in the video is not a role model.
For those who want to support the channel:
/ kirill_runz
A few clarifications for the video:
00:50 Ax after thermal hardening. Initially, the edge of the point was chipped off the ax. This could indicate incorrect heat treatment. So I decided to re-harden the steel.
01:28 I apply a primer (paint) to the ax. Before painting, I made a surface etching of the metal. The paint adheres better to the etched surface.
01:41 Sketch of the drawing. I drew by hand. All images and characters are taken from thematic materials on the Internet.
01:47 To transfer the sketch of the drawing to the product, I use lavsan tracing paper and a pencil with a thin rod.
04:08 Steel game with a hilt. With this needle, I clean off the paint on the ax in the places where the metal should be etched.
04:51 Medical plaster. With the help of it, I additionally protect the metal from etching.
05:08 Metal spoke. It is needed to connect a current source.
05:21 Water.
05:43 Copper plate.
07:07 Technical characteristics of the welding machine.
07:47 I rinse the ax with water.
09:05 A mark from zone hardening is visible on the ax. The darker part of the ax is where the metal is hardened.
09:35 Nail polish.
10:44 Nitric acid solution 5%.
11:15 a.m. Baking soda (alkali). I use soda to neutralize acid. I wash the ax in water.
11:55 Paint over more exposed metal.
12:25 Re-immerse the ax in nitric acid 5% (after etching, I wash it again in a solution of water + soda).
13:23 I use a special liquid for blackening metal.
14:06 I use a lubricant to protect the metal from oxidation.
Tools and materials that can be useful for this kind of work:
- angle grinder
www.amazon.com/gp/product/B00...
- Benchtop Band Saw
www.amazon.com/gp/product/B07...
- inverter welding machine
www.amazon.com/gp/product/B08...
- Benchtop Drill Press
www.amazon.com/gp/product/B08...
- Electronic Fixed-Base Router
www.amazon.com/gp/product/B08...
- Variable Speed Bench Grinder
www.amazon.com/gp/product/B01...
- Bench Belt and Disc Sander
www.amazon.com/gp/product/B00...
- Engraver
www.amazon.com/gp/product/B00...
- Reusable Half Face Cover with Safety Glasses
www.amazon.com/gp/product/B08...
- Carbon Copy Paper, Transfer Paper
www.amazon.com/gp/product/B07...
Негізгі бет Ғылым және технология Drawing on metal. Old rusty ax restoration and decoration.
Пікірлер: 2 М.