Didn’t hear uprated actuator as a mod, without it he’s not hitting near 300. They do come with an awesome soundtrack, love my ST. 👍👍👍
@CarswithJamesMosley
Жыл бұрын
I'm not sure if it had one to be fair, I'd have to check with him. However, the owner is now in the process of putting the 2.5T engine into a mk6 Fiesta ST as a new project.
@ApnaChoud
29 күн бұрын
Had mine to DS uprated actuator and recirc valve Forge also purchased their IMAP £500 seems allot but it literally is a no brainer. Prior car seemed hesitant in 2nd gear tuned before allegedly stage 2 still flew but played about with their imaps uploaded their modx seems a much better quality of tune now.
@danefeatherstone-barr3121
2 жыл бұрын
Came for the review. Replayed for the sound. 🤤
@CarswithJamesMosley
2 жыл бұрын
Thanks 🙏 that 5 cylinder engine really is a peach 🍑
@euanscotland
2 жыл бұрын
I've been modding mone for the last 12 months. Booked in for a CP 340 remap in 2 weeks time.. I defo caught the bug..... Just got a set of custom headlights in the post a few weeks ago. Perhaps the best purchase so far.!
@CarswithJamesMosley
2 жыл бұрын
Yes so easy to catch the bug isn't it! So CP340 will be about as far as you can go with the standard turbo right? Or is that a hybrid at that point?
@euanscotland
2 жыл бұрын
@@CarswithJamesMosley spot on mate 👌 👍 I've had to add quite a few bits to get it to this point. Great hobby 👍
@euanscotland
2 жыл бұрын
@@CarswithJamesMosley got a few short videos of my lights on here.
@CarswithJamesMosley
2 жыл бұрын
@@euanscotland you planning to take it beyond that or leave it there?
@euanscotland
2 жыл бұрын
@@CarswithJamesMosley unlikely to be left there lol thats the great thing about these cars.
@djbrad1000
2 жыл бұрын
Am running mod x Rs with all mods great mapping 👍 on road and track
@CarswithJamesMosley
2 жыл бұрын
It's an awesome car mate, enjoy yours!
@keithstapleton7805
2 жыл бұрын
More likely to be around the 290bhp mark as they all are, non make the magic 300 due to limits wit the turbo (some due to it's inevitable age). Still a very good power delivery, so peak BHP readings are miss-leading. Also needs a LSD in the gearbox, that will make that power useable.
@PHIL4913
2 жыл бұрын
RS clutch kit is actually an RS clutch cover. A disc is the same as on ST. Yes it's good for its money, but the best thing is to get a single mass flywheel clutch (if u can throw money on it). An RS clutch works up to ~550nm of torque but a flywheel dies very fast in case of proper hard driving or getting a car to a racetrack
@CarswithJamesMosley
2 жыл бұрын
Some good advice there mate thanks! A friend of mine has said his single mass flywheel in his MK2 RS is pretty noisy though? Not been out in it yet to hear it myself though to be fair!
@PHIL4913
2 жыл бұрын
@@CarswithJamesMosley All of mates on st's are experiencing the noise, yes. But i'm not with my RS. There is advice for that to pull 3 litres of oil in gearbox instead of 2, i disagree with that and use 2 litres, but nothing bad happens as i can see (if use 3)
@pdtech4524
2 жыл бұрын
Nice motor! Has the same Sony stereo unit as ny 2006 2.0 duratec ghia estate! 😊
@CarswithJamesMosley
2 жыл бұрын
Actually not a bad stereo to be fair! 😁
@pdtech4524
2 жыл бұрын
@@CarswithJamesMosley Yeah it is the 'audio upgrade option' on my ghia and comes with a better speaker system! I only just recently figured out it takes 6 CDs 😲⚠️ I was using it as a single CD player, has aux input also which is always handy.👍
@cabinvibesebaystore8956
2 жыл бұрын
New sub ! Liked 🚀❤️👍😀
@rsiguy1980
Жыл бұрын
I have that annoying vacuum noise from the spooling..how can I eliminate that
@CarswithJamesMosley
Жыл бұрын
Hello mate are you not just referring to air intake noise?
@rsrated5360
2 жыл бұрын
Really good video mate , iv got a pre face lift st3 , it's lightly ish modified , ramair induction , rs vac pipe , 3 inch cat back and other slight bits , no map so running probably around 240 ish , be interesting to see what you think compared to a highly modified car once I get a knocking sorted from the rear.
@CarswithJamesMosley
2 жыл бұрын
Thanks mate, sounds good! Are you planning to map it once you've got the knocking noise sorted?
@rsrated5360
2 жыл бұрын
@@CarswithJamesMosley possibly , it's my daily driver so if I do it will be more economically based , but I would like to get it to around 260 bhp or there abouts , I started with a blank canvas 2 years ago and said I wouldn't mod it but very quickly got the bug.
@CarswithJamesMosley
2 жыл бұрын
@@rsrated5360 Fair enough - a map won't make a massive difference to the economy to be honest, although you may find you want to put your foot down more often! haha! A Dreamscience handset or similar (like the car in this video has) is a good place to start, as it contains several different maps depending on the mods you have and you can upgrade the map as you go. A stage 1 map on yours would easily see you to 260-270bhp I would have thought.
@rsrated5360
2 жыл бұрын
@@CarswithJamesMosley yeah I was thinking of dreamscience , before this car I had a mk1 focus RS and that was mapped by them , that was a true handful tho. I much prefer the MK2 as a whole , the mk1 rs was so harsh but great fun
@CarswithJamesMosley
2 жыл бұрын
@@rsrated5360 Yeah when I bought my MK2 ST I could have had a MK1 Focus RS for the same price (those were the days!) but I ended up getting the ST as it was a bit more modern at the time. I've yet to drive a MK1 RS but it's definitely on my list!
@GaryWatson-q2y
2 ай бұрын
How much wud it cost to get it to 290£££
@CarswithJamesMosley
Ай бұрын
Tough to say as depends what route you go down but from a standard car as a minimum you’d probably need a new intercooler and full exhaust plus map could be around £1500-£2000 if buying everything new. You can make significant savings with second hand parts though, especially the exhaust. Also you may need to take into consideration upgrading the clutch if it hasn’t been done already. An RS clutch is around £1000 supplied and fitted usually. Hope that helps!
@jamiemolino4308
Жыл бұрын
what downpipe is he running?
@CarswithJamesMosley
Жыл бұрын
He was running a standard downpipe, but the test of the system had been changed 👍
@flavioc5389
2 жыл бұрын
You should have shown the engine bay 😐
@CarswithJamesMosley
2 жыл бұрын
Sorry mate, you're right... I missed a trick there!
@FocusRS500
Жыл бұрын
It should have more torque than a standard mk2 RS.
Пікірлер: 43