This isn’t a debate on which is more efficient anymore. I can say after seeing a number of your videos and its comments this is really an argument about preference. You’ve already proven in multiple ways that both can do the job. People supporting drivers obviously make their choice off quickness and above all they don’t mind the resistance and amount of control somewhat necessary to use it. As for those supporting impacts just prefer the convenience; for example it’s lightness, simplicity, quick and easy to change bits, and I’m guessing the lack of constant strain using it for particular projects. In my case i like the driver because I’m used to everything that comes with it; i can adjust to any bit size, you can alternate from drive and impact, and the weight is more than tolerable for me. I can understand both sides of the argument though, there’s no real superior if the person using isn’t utilizing the best out it.
@ToolswithSoAlz
Жыл бұрын
It all started because people lit up my comment section when I did a quick video of an impact driver vs a drill driving a #10 screw. People kept saying a drill is for drilling and a driver is for driving. So, I tried to explain that a drill is a drill driver. That wasn't good enough. First they said prove it. And I did. Then it was, use a Bigger impact wrench and that will beat the drill. The drill still won. At no point did I ever say to not use an impact. I said, correctly, that they were using the drill wrong and did a series of videos showing that to be true. Their other excuses being that I put weight down on the drill. Which didn't happen because I was bracing my workstation. Not having it bolted to the floor and all. In every single video, I was right. Do I care if people use an impact instead of a drill? I couldn't care less. Use whatever gets the job done bit know what each tool can do and how it should be used.
@ToolswithSoAlz
Жыл бұрын
Wow! Start it off with a lie. Nice
@ToolswithSoAlz
Жыл бұрын
@gilbertcox5075 Ma'am it's you're not your. I know when you come from a family tree that has no branches it's a little difficult for you. It reminds me of a story I heard about your first fight; which also involved your first sequel encounter. You were bloody and bruised but at least your dad came.
@chriscolameco6850
Жыл бұрын
I’ve used an impact my entire career and just switched to a sub compact drill/driver and wish I did it sooner. It saves my ears, it’s faster, there’s more control. Literally the only thing I can see myself using the impact for now is with things like lug nuts on my truck. I always thought the drill was a useless tool. My impact driver was “faster” and drilled holes and I just used my giant octane hammer drill for masonry. I got a subcompact drill/driver in a combo kit that was on sale because it was $50 more to get that with two batteries than the bare tool I was looking at, figured I’d keep it at home for around the house stuff and now it’s my go to for everything. Lighter than my old impact, and it’s got enough torque for metal and masonry.
@Karmakatt6
Жыл бұрын
@@LSFordwork smarter, not harder 😅
@christoph0123
Жыл бұрын
Impact is always a nicer experience. Saves your wrists, too.
@krispy42008
10 ай бұрын
That sound is damaging to eardrums though
@dillonblum6722
10 ай бұрын
theres a clutch for a reason
@czed7515
10 ай бұрын
@krispy42008 we had a guy have a small fracture in his wrist where he fell and didn't even know it was hurt. He used a drill later that day and when it caught it twisted his hand off.
@joshcraig1551
10 ай бұрын
There are pussys and there are men anti-kickback drill exist you just wanna be special 🤷♂️
@EagleMitch
10 ай бұрын
@@czed7515 I was working on a house project last year trying to put a large screw in to a silcock outside and it caught and sprained my wrist and thumb. I did not know up until that point that an impact would not do that. Buying an impact for that sort of thing instead now.
@olivercook8808
Жыл бұрын
You brace your entire body around that drill to keep your wrist from doing 360s around your garage - impact comfortable in one hand. Impact wins for me
@nickmonty2961
9 ай бұрын
Very loud
@nickmonty2961
8 ай бұрын
@@Lit_uchiha4 loud enough to need ears on
@WallsOfAbaddon
7 ай бұрын
@@nickmonty2961yup, like a thousand thunderstrikes to the brain per second. Im so done hearing people say 'oh but its not that loud'. Theyre clearly deaf f****** idiots. Id rather listen to Pump It - Black Eyed Peas coming out of an amplifier for 6 weeks straight at maximal volume, than be anywhere near the turbulent thundererous impact driver, especially when its close to your head. The two guys below me can piss off, clearly are 60+yo tradies who have been in close combat gunfights with large calibre rifle fire taking place near their ears.
@WallsOfAbaddon
7 ай бұрын
Drill every day of the week🖕
@nickmonty2961
7 ай бұрын
@@Lit_uchiha4 I was talking about the impact driver. I’m team drill unless I need to break something loose
@Cenobite1
Жыл бұрын
Can you show us on the doll where the bad impact driver touched you? 😢
@rubenjaimes1194
11 ай бұрын
Lol
@true8070
10 ай бұрын
Savage 😂
@ErnestOSampsonJr
9 ай бұрын
That statement is way too funny.
@BrianGodsell-yq1kc
2 ай бұрын
😂😂😂😂
@l-_-sage-_-l
2 ай бұрын
😂
@kencooley5589
Жыл бұрын
I'm happy you showed how the impact won. Using only a single hand, it never jerked around on you. Impact drivers are very friendly on the user, allowing you to drive fasteners of any size without recoil
@ToolswithSoAlz
Жыл бұрын
I'm glad you love advertising you know absolutely nothing about tools. I'm sorry I showed proper technique. Maybe if you had ever worked a job, you would know. However, being clueless isn't a crime. So, you are free to go and spread your ignorance anywhere you want.
@ToolswithSoAlz
Жыл бұрын
Princess the only thing you've ever done on the job is swallow whatever men out in your mouth
@edwinvillatoro3945
Жыл бұрын
@@ToolswithSoAlzwhy are u getting so mad over this guy’s opinion about their tools? extremely rude for no reason
@mattlane2282
Жыл бұрын
Do pool work we have brass anchors that have to be put up and down, I'd always brace the drill on my side for when it grabbed going down or hung up going up. Use the m12 impact now (m18 little too powerful even on 1). Body says THANK YOU everyday. NEVER have to worry about jerking my wrist.
@rolls_8798
Жыл бұрын
with this size of lags though (and assuming decent working conditions) you're pretty well braced with the drill the whole way and it actually ends up more comfortable (less vibration and faster)
@BogdanNourescu
11 ай бұрын
Why don't you hold the drill with 1 hand like you did with the impact?
@ToolswithSoAlz
11 ай бұрын
Excuses are fun to make when you can't handle what you saw
@TheTuri08
8 ай бұрын
@@ToolswithSoAlz ok. But why don’t you though? I mean its only fair isn’t it?
@someonek11
6 ай бұрын
@@ToolswithSoAlzthis really isn't a response, I'm sure he was asking a legitimate question.
@hughmann7485
4 ай бұрын
because it'll snap your wrist lol
@carlosf9278
2 ай бұрын
@@hughmann7485actually. That specific drill won’t since it has anti kick back… most guys I know don’t use drills for fasteners since their only drill is a massive hammer drill lol… I have a compact dewalt drill and a hammer drill… the smaller drills I’ve never experienced any wrist snapping… the larger dewalt hammer drill I have experienced it a couple of times
@tonybilco1317
Жыл бұрын
Definitely i find more control and stability with impact driver
@raduszilagyi6055
Жыл бұрын
I have both. Drill for drilling and impact driver for screwing. I found out from experience that the impact driver is not necessarily faster. But in some situations it can do things the drill can't. Having both is a win-win for me 😀
@theperfectpaintertoolreview
Жыл бұрын
No question it's faster. But it's not All about speed. U had to hold on for dear life and push with all your might. U had 1 hand on the impact. I use both, when I do use an impact it's just cuz it's easier and the tool does all the work
@sarfine64
Жыл бұрын
sometimes it is difficult to reach and you stand on your toes and work with one hand. So I use impact a lot more
@andrewramirez6332
Жыл бұрын
I prefer impact driver just because of the convenience switching out bits is faster
@williamsanders468
Жыл бұрын
As a mechanic the drill only helps if your drilling something after that those drivers are like your best friend.
@ianmullins9654
Жыл бұрын
You said it. Use case is everything, as a mechanic I’m using an impact 90% because it’s made to deal with bolts and other fasteners. If I need to make a hole I’m grabbing a drill.
@michaelderkinderen2261
8 ай бұрын
well this is a wood screw and everything is different there. Also an impact wrench and impact driver are different tools, the impact driver being one of the most useless ones imo. And as a mechanic can't do without an impact wrench of course. But in woodworking I would always use a drill driver, impacts just don't make sense there unless you really don't care about needing 10 times longer for every screw. We use impact wrenches for bolting together big beams. But for any screw that cuts into wood you're better off using a drill.
@l-_-sage-_-l
2 ай бұрын
I imagine you aren’t driving in many lag screws into wooden cars
@jonpierce734
Жыл бұрын
You didn't end the debate, you extended it. Like this comment all you impact users.
@ToolswithSoAlz
Жыл бұрын
Now that's just pathetic. Like my comment because I need to feel vetter about myself. What a poser
@zigsrig
Жыл бұрын
Personally, I'd use the drill to make a pilot hole then the driver to drive the bolt in. Seems it would make life easier for me, both tools, and whatever I'm drilling into. 🤷🏻♂️
@antonior2934
Жыл бұрын
I rather use the impact with one hand than struggle with the drill with two hands
@ToolswithSoAlz
Жыл бұрын
Use the clutch
@mobettaspice
10 ай бұрын
First of all. I love the videos. Second of all this “debate” is never going to end.
@ToolswithSoAlz
10 ай бұрын
I keep proving it
@pliskin444
Жыл бұрын
when I stand on a ladder with one arm, I prefer the impact driver over the drill. They both have their advantages
@macattack9041
Жыл бұрын
That otter, wearing medieval armor on your shirt wins
@ToolswithSoAlz
Жыл бұрын
Thank you
@brandonrobertson6327
Жыл бұрын
I knew an ex lineman that would drive pole steps in with a 3lbs hammer, no pre drilling. But, this was from a man that would also have someone slide a cinderblock under a VW Beetle while he picked it up to change a tire.
@vivasativa5194
3 ай бұрын
I drive J-hooks(same diameter as pole steps) on a pole with a 3lbs hammer. I work on ladders drilling holes into masonary and drive them screws the same hammer drill. Only real men work like this.
@brandonrobertson6327
3 ай бұрын
@@vivasativa5194 Pole steps use back in the early 80's to 90's was about the diameter of a quarter. These steps have a step angle on the point. Most linemen drill a guide hole a little smaller than a dime. The issue with driving these without a guide hole, you would usually bend them before fully setting it.
@Get_Splooshed
7 ай бұрын
Bro put his entire soul behind that drill lmao impact won
@ToolswithSoAlz
7 ай бұрын
Ma'am you don't even know how a screw works
@lauramagagnoli7750
Жыл бұрын
I always snap those little adapters after the 3rd or 4th lag i just use an impact wrench
@nhbountyhunter
11 ай бұрын
I use a drill all day everyday to drive 100's if not 1000's of fasteners a day. I have an impact but don't ever use it. My body is fine and wrist is fine. I refrained from saying this in other comments but MAN THE F$&K UP if you think a 20v drill is a workout to use. What is wrong with you guys? My Great Grandfather built houses till the day he died in the 80's. He never used a power tool, ever. Hand drills, hammers, hand saw... He was a damn machine. I equate this to younger mechanics that have to were gloves and have trick to keep oil off their hands when changing oil. Get your damn hand dirty, your a mechanic, grow up, man up, shut up, do the job, and do it right (not that using a driver is wrong).
@bmcrider34
Жыл бұрын
All I’m gonna say is there is a reason the driver comes with a mountable brace. For those saying he’s pushing down harder…it’s just to avoid the kick.
@bmcrider34
9 ай бұрын
@@CytoplasmicGoo if you have joint issues or are elderly then using the impact will get it done. The drill/driver is the correct tool though.
@LiViD.21
Жыл бұрын
My impact is light weight hooks on my work belt I choose comfort other than carrying a much heavier hammer drill. That’s just me and my impact will drive them no problem it may be slower but that’s ok with me.
@ToolswithSoAlz
Жыл бұрын
And it will also snap bits more often.
@forus4600
Жыл бұрын
Boy hates losing lol
@TheRealDarklight
Жыл бұрын
@@ToolswithSoAlzWith a drill maybe. Impacts are smaller, less likely to cam out especially if you have to used them somewhere hard to reach where it isn't easy to give appropriate back pressure, there lightness makes them easier to use above the head for longer. But to be fare, in most scenario I usually drill with a drill, drive with impact. And if I need the clutch to set screw flush evenly and quickly, obviously use the drill, or is the application calls for it, like an earth auger. But on other hand, with my impact I can quickly change tires, good luck doing that with a drill. Different tools for different jobs. It's silly to have this kind of loyalty to drills, what did impacts do to you?
@CarpenterJake
Жыл бұрын
You're absolutely right, I've known since I started construction you're right, however, I do like my wrist in one piece.
@imagino0010
Жыл бұрын
It should be called: “One hand with the Impact Driver VS Full two hand body weight push down on the Drill.”
@ToolswithSoAlz
Жыл бұрын
It should be called people who make excuses to avoid accepting what they saw. Here's how sad the excuse is. Does pushing down make the drill spin faster or the wood softer? Yeah
@R1CK_54NCH3Z
Жыл бұрын
Now wait while I jump on top of the drill drive. By all means, you go ahead and abuse one tool, the rest of the tradesman watching will use the tool designed for the job
@charlesttent8972
Жыл бұрын
He doesn't understand he's not a construction guy he's a hobby guy.... Builds birdhouses and shit...
@jamesrogers5202
Жыл бұрын
I was wondering if anyone noticed it wasn't a fair test that yes he put both hands on the first one at first but keep them on the second one the whole time and even put his whole body on the other one why I held the other one with just one hand and barely has any weight on it and barely any pressure just letting it do its own self
@masonbarto4003
Жыл бұрын
And the drill had a pilot hole
@lawrenceshdow
Жыл бұрын
@@charlesttent8972he understands just fine. He also understands youtube and how to get views.
@adolfozxzx486
4 ай бұрын
to me i’ll use a impact for the short screws bc it’s just easier on the wrist, but if im drilling long screws through a high beam im picking that drill. it’s wayyyy easier and less tiring
@cav8285
Жыл бұрын
Hope y’all don’t think that I care about the impact or the debate but just commenting on something I noticed, the impact seemed to be driving the lag with its own power while the drill seemed to have a lot of help from his other hand pushing down really hard. Not sure how much of a difference that made but still seemed like an uneven playing field. (I usually use my drill before my driver by the way. I think the drill is better for most jobs.)
@cav8285
Жыл бұрын
Also wished he would stop using deep sockets for these demos so he wouldn’t have to start and stop so much.
@ToolswithSoAlz
Жыл бұрын
Pushing down would actually hurt performance
@cav8285
Жыл бұрын
Good to know
@a1collective443
Жыл бұрын
@@ToolswithSoAlzlol so WHY you pushing down so hard 😂🙈🤦♂️🤷♂️
@lougodi4927
Жыл бұрын
Lol I'm beginning to think his videos are meant to be taken as a joke.
@123donmaster
2 ай бұрын
It's the harbor freight socket that's slowing it down. Could have been a bit faster with a different brand socket. Lol. HF fanboys will whine
@jeremyd8778
Жыл бұрын
Yes the drill drives it in more efficiently, but you have to have the strength to deal with the counter rotational force. Two hands on that drill and a good stance. If a person is working off a ladder only has one hand to stabilize the tool then that's the benefit of having a impact driver over the drill. Every tool has a purpose and reason for existing. I'm always going to want both. He does a good job demonstrating the benefits of both tools right here.
@ToolswithSoAlz
Жыл бұрын
It doesn't require strength it requires knowledge. While you were busy making excuses you should have taken the time to watch and learn.
@jeremyd8778
Жыл бұрын
@@ToolswithSoAlz take it easy tough guy 😂.
@jeremyd8778
Жыл бұрын
@@ToolswithSoAlz now for your next demonstration I want to see you on a ladder 25 feet up reaching out with one hand overhead driving in those lag bolts. One time with a impact driver and one time with a drill driver. See how that goes. " No Excuses" " you just need knowledge " 😂😂
@MarissaTheMuse
10 ай бұрын
@@ToolswithSoAlzwhy are you so rude to people man? This is a completely benign comment even if you think he’s wrong what is the justification for constant school yard insults and just being so rude. He didn’t say a thing about you, but you respond as if his comments about impacts were a direct attack on you and your father the drill driver. Seriously is there a reason ? Do you get more views/interaction by acting this way or something ? Or is this your genuine personality?
@ToolswithSoAlz
10 ай бұрын
@PineyJustice Sounds like you need a remedial course on how to use tools.
@raymitchell9736
Ай бұрын
After this video, I dare someone to say "I don't see it" LOL.
@ToolswithSoAlz
Ай бұрын
They will
@raymitchell9736
Ай бұрын
@@ToolswithSoAlz yep... and I am looking forward to it too 🙂 I can't wait for THAT video LOL
@ToolswithSoAlz
Ай бұрын
@raymitchell9736 read the comments
@raymitchell9736
Ай бұрын
@@ToolswithSoAlz OMG... Okay, I read a few pages of them... some are not nice. Well, I've heard it said that Haters are just gonna hate and you can't fix them. I don't know what their problem is... if they doubt, they can test these tools themselves and make their own video and post it! On the other hand, the better comments were: "Drills are faster, impacts are safer (on wrist)." Your point was about speed. BTW: I noticed the impact driver has some smoke coming off of it. Something got hot.
@ToolswithSoAlz
Ай бұрын
@raymitchell9736 they see what they want to see
@adam6681
Жыл бұрын
Dude, try using your drill all day with that amount of strain on your wrist. Bet after your 10th bolt on a jobsite, you'd be begging the real tradesman next to you for an impact driver
@ToolswithSoAlz
Жыл бұрын
Do I need to break out the Crayons and draw you a pretty picture of how this would really be done?
@markilleen4027
9 ай бұрын
@@ToolswithSoAlz go on how would it really be done, over head one hand,
@ToolswithSoAlz
9 ай бұрын
@markilleen4027 it's called a pilot hole. Yeah, if you know what you're doing you drill a pilot hole and then you use the drill, by engaging the clutch, to drive the fastener. See, I know you've never done anything like this. I also know when, where, and why you wouldn't be on a ladder doing this and you don't. You suffer from arrogant ignorance. It's a serious infliction caused when one is allowed to give their unchecked opinions online because social media limits what people, especially creators, can say back. You can pretend that you're a tradesman here because most people don't know anything about building. However, amd hilariously so here, you'll eventually run across someone who does know. Someone who knows well beyond the basics of KZitem University (where any troll can claim to be anything). The minute you talked about wrists hurting I knew you were about to explain how little you actually knew. You didn't disappoint because, like a spoiled child, you had to come back for more. Unlike a spoiled child it was because you foolish though you had watched enough videos to be a part of an adult conversation.
@booshallmighty
11 ай бұрын
I thought a few times , would an impact driver be better than my electric screwdriver? Your videos have made up my mind. My blue Bosch is small,powerful and has a clutch. My combi drill does nust about everything. I only use an SDS for for core drilling
@driift-3823
Жыл бұрын
Yeah the driver takes and handles the torque better and they ratchet themselves to stop spinning when the bolt is in. Allows you to not snap your wrist or lose control and requires less energy.
@curtisyue182
5 ай бұрын
Since I started watching you now whenever I'm about to reach for my impact I start hearing you in my head like "Impacts are small fasteners only... only.. only...." "The drill is the superior tool.. tool. tool..." So yea I use my drill a lot more now, lmao
@ToolswithSoAlz
5 ай бұрын
Have you regretted that decision even once?
@curtisyue182
5 ай бұрын
@@ToolswithSoAlz Haha not yet. It's definitely a more versatile tool 👍
@ToolswithSoAlz
5 ай бұрын
@curtisyue182 I'm glad I could help
@adammendoza3503
Жыл бұрын
Awww, come on you put a lot more pressure on the drill driver… you’re not fooling anybody….
@ToolswithSoAlz
Жыл бұрын
If you actually knew how these tools worked you would know that pushing down of the drill will hurts its performance.
@chrisfigueroa1184
10 ай бұрын
You should do a test doing the same exact thing in this vid but use both with 1 hand
@ToolswithSoAlz
10 ай бұрын
Shut up! Stupid excuses are for losers
@bossmanz28
Жыл бұрын
The drill is definitely faster with large lags. I think the impact shines where its smaller hardware. The other thing is in my line of work most of the stuff im doing is aerial and the problem with the drill is you have to be able to position yourself good to be able to stop the kickback. Pretty difficult alot of the time for me. Also how often do ppl really need to drive such large lags? Like you said both tools definitely have their place
@ToolswithSoAlz
Жыл бұрын
I used to drive these every time we did a roof mount. We always used a drill because it was so much faster.
@damienmidanik9680
Жыл бұрын
Saying a drill is better than an impact is like saying an apple is better than an orange. They are 2 completely different tools designed for different applications. If you want to make a drill look better, run screws into wood. The constant torque that a drill puts out is designed to drive screws into wood. If you want to make the impact come out on top, start using both tools on machine fasteners. The impact is designed to use hammering force to break the fastener loose and then speed it out. It is also designed to quickly thread a machine fastener and then use hammering force to torque it down. A drill shouldn’t be used to try to break bolts loose just like an impact shouldn’t be used to drive screws. The right tool for the right application and why it’s so common to find both tools sold together.
@ToolswithSoAlz
Жыл бұрын
Tell me you don't know what you're talking about without telling me you don't know what you're talking about
@damienmidanik9680
Жыл бұрын
Hahahahaha! Show a video of you removing a bolt torqued to 250 foot pounds with a drill. I have been using impacts and drills for over 30 years daily. I know exactly what I’m talking about but you obviously have never worked with anything other than a board. I will run circles around your ass with an impact in the machine world. You and your little drill can stay in woodland.
@ToolswithSoAlz
Жыл бұрын
See previous response because you clearly are a half wit
@newtonraymond77
Жыл бұрын
It depends on how much leverage you have that would determine the one you use. If you're lagging bolts up to a certain height you're better off with the impact, but lower all the way to the floor the drill works best.
@ToolswithSoAlz
Жыл бұрын
Yup
@ryanharrish8363
Жыл бұрын
If I was installing those lags I wouldn’t be reaching for the hex impact, I’d be reaching for my 700ft lb impact wrench, which is about quadruple the drills torque on a good day. I fell in love with the hex impact when we were installing a fence and were about 1400 screws into it while using both drill and hex impact side by side, the hex is; smaller, lighter, cams out less, and changes hex bits much faster than the drill chuck
@joseph4043
6 ай бұрын
So I got a somewhat new m12 impact great for what I need I made the mistake to start with the m18 brushless they’ve been solid but I think I want to upgrade but maybe just the drill I think my m12 fuel and m18 brushless impact should be fine but my drill is starting to break down
@ma-t6949
Жыл бұрын
The big thing is lash and kickback. Also loosening a bolt can be aided by impacts
@ToolswithSoAlz
Жыл бұрын
Yup
@ggexploringUT
Жыл бұрын
The problem is the 1/4” impact is just flat out the wrong tool for the job. Any framer worth his salt uses the 1/2” mid torque to drive lags over 1/4”.
@CabinetFramingUK
10 ай бұрын
Should have used an impact wrench. Impact driver with a hex adapter and socket, way too many wobbly moving parts. Too much loss of force.
@markilleen4027
9 ай бұрын
big impact wrench is best, flies true them,
@leeedwardtayson9141
7 күн бұрын
For me, an impact drill is more versatile due to torque clutch. Impact drivers on the other hand is more handy and comes with quick release shaft in wide variety of driver bits (including impact driller bits) In that case, I'll just buy a 1/4 hex shank adapter for my impact drill to have that quick release feature. Just put in mind that when driving using an impact driller, always use the torque clutch to prevent injuries caused by excessive twisting motion.
@KansasTools
Жыл бұрын
Incoming impact boy tears 😂 debate is over, and was never a contest!
@ToolswithSoAlz
Жыл бұрын
Imagine what would happen if I showed them how this would really be done. Lol
@dakotadaulton3148
Жыл бұрын
1 second difference
@KansasTools
Жыл бұрын
@@dakotadaulton3148 over the course of a whole day, it makes a difference
@dakotadaulton3148
Жыл бұрын
@KansasTools I don't care I ain't a carpenter I'm a ironworker
@KansasTools
Жыл бұрын
@@dakotadaulton3148 well thanks for disputing my comment from a point of view that makes no contribution to the video 👍🏼 you’re a winner
@leemiller9486
2 ай бұрын
Impact drivers are kind of like a emasculated drill... making them noisy and slow with no awesome torque 🤏🤓...yah yah yah...it's easier on your lil wrist 😂.
@davidperry4013
Жыл бұрын
A lag screw like this is where a 3/8th drive impact wrench would shine over a impact driver as well.
@nexxtgenfarms8615
Жыл бұрын
Faster doesn’t mean better, impacts are smoother and more controlled, slow is smooth, smooth is fast
@lifetimehart6200
Жыл бұрын
I use the drill for everything. No need for an impact driver
@ToolswithSoAlz
Жыл бұрын
They both have their place
@andrewrodriguez8492
Жыл бұрын
How can people actually prefer an impact over a drill for large lag screws? If the impact is all you have then just use it but if you have a drill and care about speed, use the drill.
@davidperry4013
Жыл бұрын
For those larger lag screws like these, an impact wrench is the way to go. Impact drivers have fast and soft impacts and impact wrenches have slow and hard impacts.
@andrewrodriguez8492
Жыл бұрын
@@davidperry4013 idk bro everyone has a different approach I guess. A drill is just faster so in my mind, it's the way to go.
@davechan5159
Жыл бұрын
To each their own - two different tools. Outcome was as expected.
@anything_alt6173
Жыл бұрын
I got both and extra ones all work the same but dewalt here my stepdad owns all Milwaukee and yes there is more power but dewalt get its done plus i went for the yellow and black colorway😂
@tx_southpaw4202
Жыл бұрын
I’m here before the… “But the pilot hole + the fast forwarded footage + my other excuses + why is this so important to you even though I’ve complained every video because it’s important to me ” … 😂
@ToolswithSoAlz
Жыл бұрын
You're too late. It's already started
@bread-gz3rl
Жыл бұрын
Neither, get the mid tourqe that's actually designed for giant bolts so you stop snapping adapters every 10mins and smashing your ribcage lmao
@Duane2004
Жыл бұрын
At this point I'd literally just get a 1/2in mid tourqe because that regular drill isn't gonna put up with that forever and the socket adapters always break anyway
@tylerrogers8807
Жыл бұрын
That really sucks when they break off flush and can't get the damn things out
@jamesozment1
Жыл бұрын
I use Milwaukee 1/2" drive M18 impact ,or the Dewalt version depending on who's tool I'm using . They drive lags way faster than a drill or impact driver.
@elitedoorservicellc7419
Жыл бұрын
Imagine driving lag bolts all day long. At the end of the day, I believe you'd be way more fatigued using the drill vs the impact. True the drill may be faster, but at what cost...?
@GTB-yu2be
Жыл бұрын
But come on!..... You are really going to tell me that it's not fun using the impact though?
@OsirisNeits
5 ай бұрын
Dude was holdin on to that drill for dear life.
@ToolswithSoAlz
5 ай бұрын
K
@michaelhornbeck124
10 ай бұрын
Almost thought you were walking away when you were using the impact😅😅
@ToolswithSoAlz
10 ай бұрын
Simp Systems ok
@Doxxi
Жыл бұрын
They have their own uses. When I'm on a ladder 20 feet in the air, I don't wanna fight that torque on the drill. Unless you're production pushing out 100's of units a day. Saving 10 minutes over the course of the entire day isn't really worth the strain the drill puts on your wrist, forearm, or side as you used here
@billyd2593
Жыл бұрын
Drill for the speed , impact driver for the ease of operation. Both have their place. I’m an impact guy they’re easier on my wrist and gives you a free hand.
@MarkusAnthony88
Жыл бұрын
Impact way better if you have weak arms and wrists and get paid by the hour.
@giosanchez4300
Ай бұрын
I wish drills could loosen bolts without the bit coming loose
@myh1180
Жыл бұрын
Impact for tights spaces where u can’t use two hands… drill is faster yes. It can also fuck u up If it catches.
@l2klogic911
10 ай бұрын
They are for different thinks. Impacts for mechanical and mechanics. Drinks for woodworking or all other stuff
@rogerellingson1332
Жыл бұрын
The impact driver won't break your wrist or clock you in the temple if it hits a tight spot. The drill will do both if you are not super careful.
@ToolswithSoAlz
Жыл бұрын
Put the drill on your left going in and your right going out
@EachofUsTeachOneofUs
Жыл бұрын
Break a Stuck Nut with your Drill. Tell me how you stay on that Phillips tip with a 38lb Drill that is an upper body workout while you work! Impacts generate 2-3X the TORQUE BUT, when NEEDED…sinking lags, breaking stuck nuts n bolts…if you want it to be a 10 speed dragster…it probably will be the lesser chosen tool. If you want control, power that is easily transferred to the fastener- by a tool that is about like a two liter bottle in size n stature..an Impact is Miles ahead-pound for pound they dominate!
@ToolswithSoAlz
Жыл бұрын
Ok
@erichood3169
11 ай бұрын
Drill for wood impact for metal.
@FatBikerVaibhav
2 ай бұрын
Please do it with 1 hand next time
@ToolswithSoAlz
2 ай бұрын
Please make better excuses so you don't advertise your ignorance
@tehsheik
Жыл бұрын
This guy thinks we're dumb. He doesn't use the top power mode (the one with the lag screw on it), he thinks we didn't notice that he was jamming his full body weight onto the drill, and the fact that the lag is already a few threads in all prove this. Also, it conclusively shows he doesn't know how to use these tools.
@ToolswithSoAlz
Жыл бұрын
Ma'am does pushing down make the drill spin faster or the wood softer? See, you make excuses when you aren't man enough to accept the results.
@daifeichu
11 ай бұрын
Back in my day we didn't have impact drivers. Now you sissy's with limp wrists think you can only drive a fastener with an impact driver. And get off my lawn. Really though. We didn't have impacts. That's why there's a clutch on the drill/driver. Not to save your sissy limp wrist. It was used for small fasteners so you didn't over drive it and strip the hole.
@ToolswithSoAlz
11 ай бұрын
Exactly
@larsmurdochkalsta8808
Жыл бұрын
Bro I'm getting so confused by this impact versus drill debate. People keep saying all the impact is better for this or this or this and they're all naming things that drills are specifically designed and optimized for. Then they'll say, but you can use a drill for this and it's a thing an impact is optimized for and I am getting very confused. It seems like modern impacts have more utility than ever before, I'll grant you that. But damn I think I'm just going to use a drill correctly for most shit. Then use an impact on like my car and stuff.
@ToolswithSoAlz
Жыл бұрын
That's kind of what started this whole thing. I did a quick comparison between a drill and an impact and people kept telling me a drill wasn't designed to drive fasteners. I knew that was false so I set out to show them. The excuses followed.
@soulstech414
Жыл бұрын
You were holding the impact lightly with one hand while you were pushing with both hands with the drill... so I mean..
@bryangarten8664
Жыл бұрын
I made a comment about you drinking and to relax. That was a closed-minded and self-estatement. I regret it. Please forgive me and fact I was the alcohol. At what time? So the jokes are on me huh?
@ToolswithSoAlz
Жыл бұрын
You're alright. I appreciate the apology. Please take care of yourself. God bless
@jamesgilbert8452
10 ай бұрын
He was gripping that drill harder then this argument 😂
@ToolswithSoAlz
10 ай бұрын
Do you believe that a second hand made the drill spin faster or the wood softer?
@jamesgilbert8452
10 ай бұрын
@ToolswithSoAlz 😂 the second hand puts the fear back into the drill where it belongs
@bartholomewgreatpants3425
Жыл бұрын
Prob could've done that lag faster with the m12 hammer drill than the m18 impact and I do enjoy all milwaukee impacts and drills but facts are facts.
@ToolswithSoAlz
Жыл бұрын
Yes sir
@C.Adams82
3 ай бұрын
Everyone is saying he's holding on for dear life with the drill or it'll snap your wrist, do these guys know how to adjust the clutch. The drill will always be faster and if you adjust the clutch it's not difficult to hold.
@ToolswithSoAlz
3 ай бұрын
I know
@amri2design
4 ай бұрын
I prefer impact driver, it lighter and safer when working in high places or on stairs without worrying about the risk of kickback 😅
@ToolswithSoAlz
4 ай бұрын
You're letting your excuses expose your incompetence
@darnelmcgowan7019
Ай бұрын
Do a ridgid brushed drill va the Milwaukee impact. I’m curious if a drill is that much better that it could beat a “far superior” impact
@ToolswithSoAlz
Ай бұрын
I used a subcompact Ridgid to beat the Milwaukee already
@Bassbean777
Жыл бұрын
Better is a relative term. Drill is faster yes, but put in a few dozen in a row with that drill, it gonna get smoaking hot and shut down. The impact cant be lugged it will either free spin or impact. So if you only have a few lags the drill wins. But if you have to put in many that drill will overheat and shut down. I have that same milwaukee drill, i had it oozing grease and oil after 5 or 6 minutes lol after it shutdown for the second time. So if the debate on which is faster for a couple lags drill wins, but if you need more endurance then just a couple lags the impact wins. I dont have all day to take a cupcake brake waiting for the drill to cool down so it doesn't shutdown or start oozing grease and oil lol. So if you have to put in a bucket of lags the impact is going to win because it will still be running while the drill is locked out boiling grease lol. Faster means nothing if the faster tool cant keep up with the pace of the install or the size of the job. A sprinter is worthless if the race is 15 miles up hills and the sprinter beats the pants off everyone the first 1/4 mile, then starts getting exhausted by a half a mile and everyone catches up and passes. Who's better is relative to how long the race is. If its a 1/4 mile race the drills better, if its a marathon, not so much.
@thomasjones2813
Жыл бұрын
Used one hand on the impact. Used whole body on the drill.
@ToolswithSoAlz
Жыл бұрын
Made excuses in one comment
@deano187x
10 ай бұрын
If you use a Torx adapter, you're adding more kinetic energy on the "Dogg" which will cause more wear and tear. Use an Impact wrench which is actually designed for driving big nuts/coach screws and then you'll see a real difference! I bet the body was pretty warm just after those two demonstrations...
@ToolswithSoAlz
10 ай бұрын
Unfortunately for you only one of us knows how this would really be done and why the drill is the only tool you would use. The beat part is you're so arrogant in your ignorance
@deano187x
10 ай бұрын
I have Fuel cordless, impact driver and an MID Torque impact wrench, I know exactly what is needed for what job. Get yourself one before you break your tools or your wrist while not actually doing anything productive haha@@ToolswithSoAlz
@dirtboy711
Жыл бұрын
Am i the only one who can tell the drill clip is sped up and slowly brought back to normal speed?!
@ToolswithSoAlz
Жыл бұрын
Do you know you're the only one lying to yourself because you aren't man enough to accept what happened in the video?
@douglassmith2055
8 ай бұрын
Impact drivers are no longer the go to on job sites, the noise is ridiculous, and the drill does everything. They are really just a marketing thing to inexperienced tradesmen thinking they need one.
@ToolswithSoAlz
8 ай бұрын
Agreed
@keithbailey5923
10 ай бұрын
This honestly something most of us knew 20 yrs ago
@ToolswithSoAlz
10 ай бұрын
Read the comments
@NinnyHammer03
Жыл бұрын
Yea the bolt is too big for that size of impact try using a drill
@bradengutweiler2224
Ай бұрын
You should do a air impact just for fun
@LamarGrey-w2p
7 ай бұрын
The drill is more powerful, I’ve done test myself and at first I saw these n think no way, but I’m a believer in the drill
@ToolswithSoAlz
7 ай бұрын
Thank you
@spartin1997
Жыл бұрын
Should have put a impact gun with a 1/2 inch drive up agaisnt it. The driver is for deck screws.
@ToolswithSoAlz
Жыл бұрын
Already did
@IRejectUrReality
Жыл бұрын
One was being held just strong enough to control and the other was being held with both hands and using your full weight on it.... There's no debate though, the best tool, it's the tool you have available. The correct tool is the drill, even though the impact is viable and actually easier
@ToolswithSoAlz
10 ай бұрын
So you're so dumb that you believe pushing down made the drill spin faster or the wood softer. Otherwise it's just a pathetic excuse to avoid accepting what you saw.
@Nick-HBC
Жыл бұрын
Sure this is a speed comparison, but I'm actually curious which is harder on the motor. I would guess the drill is harder on the motor, vs the impact driver. I'd like to what this would look like with doing 10 lags in a row, and comparing how hot the motor gets in both the drill and driver
@ToolswithSoAlz
Жыл бұрын
Listen to the impact and you'll know
@masonbarto4003
Жыл бұрын
If you guys pay close attention he predrilled a hole for the drill so smart man I love this guy so honest
@ToolswithSoAlz
Жыл бұрын
If you pay close attention you'll see that you're a liar. There was no pilot hole
@masonbarto4003
Жыл бұрын
No your the liar lmao 🤣
@ToolswithSoAlz
Жыл бұрын
No ma'am. I just show you little girls you don't know nearly as much as you think you do and watch you have a mental breakdown because of it
@gornoman
10 ай бұрын
The screw style clearly abuses its motor AND the battery. The impact is much kinder to both.
@ToolswithSoAlz
10 ай бұрын
That's a lie
@ryankelly4111
Жыл бұрын
That drill will have a short life expectancy putting in lag bolts like that
@ToolswithSoAlz
Жыл бұрын
Not at all
@osvaldovera2212
Жыл бұрын
As Long as it can drive it id stick With the impact less stress on the wrist 😮
@yohanathandowns9057
Жыл бұрын
But... the impact was NEVER faster. Its easier on the wrist. Thst impact hammered that lag in. The drill used your wrist as equal leverage.
@dirtbikedude1325
11 ай бұрын
This aint a debate. It’s preference. I like impacts feel and how they don’t destroy your wrist if you give them a little to much trigger
@ToolswithSoAlz
11 ай бұрын
Sounds like you don't know how to use the clutch
@dirtbikedude1325
11 ай бұрын
@@ToolswithSoAlznope cause I don’t use drills. Thought that was obvious
@raindub1910
Жыл бұрын
The drill is obviously better for speed when it come to driving big screws, butttt they can easily strip 10" to 4" tech torque bit screws and if that happens grab the impact and finnish the screw off.
Пікірлер: 1,8 М.