604 dislikes are from jealous manly dudes who failed at drilling 😂
@fungames24
3 жыл бұрын
I failed to drill, and I need it done now. But she wouldn't get to the point. So -1.
@francopedro4910
2 жыл бұрын
instaBlaster.
@CatsBtrippin
Жыл бұрын
If you have soft brick you don’t need a masonry drill bit
@tyesonbuxx
Жыл бұрын
That must be it
@gregwhealtonjr.2550
11 ай бұрын
😂😂😂 yo this is the best comment I've seen on here!!!
@Archangeldawn
5 жыл бұрын
Super useful and cute video! I almost bought a Hammer drill because I'm trying to drill through brick to install an A/C Window Unit Bracket but I see I just need a special masonary drill bit to use with my existing power drill AND thank you so much for specifiy that the masonary drill bit is supposed to be shorter than the anchor drill, saved me a headache!
@user-hh2ew5fk3q
6 жыл бұрын
I must have typed in chickens by accident
@wiseman3911
Жыл бұрын
Good one 😂😇
@gillysan9326
6 жыл бұрын
If later you don't need the stuff you attached to the wall you can use plumbers putty to seal the hole or just leave the screw in there. That becomes really important if you live somewhere where water freezes in winter or the water can begin widening & cracking from the hole.
@hulmad
3 жыл бұрын
Fuck. Read your comment after I put my new house numbers up.
@josiegrace6547
3 жыл бұрын
@@hulmad- 🤣🤣🤣🤣🤣🤣🤣🤣
@sigkenfeelsigken3344
2 жыл бұрын
How much water is going to penetrate a 3/8 hole. Lol
@OfMiceAndMegabytes
4 жыл бұрын
Thanks this is simple yet saves me a lot knowing I don't need a hammer drill.
@soyuz281
Жыл бұрын
I tried the same thing. It took forever to drill just about an inch deep. The bit was new. The drill didn't have hammer feature. It would be nice to know what I am missing.
@babymantuck3256
Жыл бұрын
Good video! After watching and drilling into brick I must add these tips drilling into heavier, denser brick. 1: Use good quality bit. 2: Low and steady rpms and occasionally higher rpm vs constant high rpm produces easier drilling. 3: Use compressed air to keep brick dust from building up in the holes.
@nandodando9695
5 жыл бұрын
Actually had the info I needed. Masonry Bit for brick has a sort of hammer head. Thanks. My DIY went up 2+
@inspiration289
5 жыл бұрын
hi, where did you get that drill bit? and what does it call? we run in to the issue and cant drill a hole into the brick at all, although we are using the carbide masonry drill bit. thanks.
@ThePeepingEgg
6 жыл бұрын
LOL my chickens are always all around me, too! I'm in the process of TRYING To put up a greenhouse I built....we shall see how that goes. i'm glad to have found your video. The concrete screws I bought came with the drill bit, so that is helpful. Thank you for mentioning that the drill bit should be smaller than the screw itself. Don't worry about the negative comments, some people just don't see positivity in anything! Have a wonderful day and thanks for sharing your knowledge!
@kreative15
3 жыл бұрын
Just want to say thank you so much. I been trying to find a video that simply explains what I need to drill into brick. I want to install my ring door bell on my brick house but dont know what tools I need.Today I stumble across this video.Thank you so much!
@fraserm803
11 ай бұрын
I just hot glued mine to the brick Or you could buy silicone glue
@dr.wardsonlinelessons
5 жыл бұрын
Came to learn how to drill into brick...once finished, I HAD to go and watch the chickens try out the chicken swing!
@kevinb707
3 жыл бұрын
I’ve got an 18v drill and that same drill tip but I can’t drill into my brick at all. It just makes a little dent. What am I doing wrong
@bobjackson5912
7 жыл бұрын
Went through 10 ridiculously complicated videos to find the perfect one. Succinct PLUS chickens!
@InsaneWorkouts1
5 жыл бұрын
Are you using a hammer drill? I’m having a lot of trouble with my regular drill. Thank you!
@Stevie74133
3 жыл бұрын
Me too. I feel weak 😭
@royjohnson9043
2 ай бұрын
what screw driver were you using?
@Laszlomtl
Жыл бұрын
An Excellent explanation of the subject !! Thank You ! Laszlo Montreal Photog. Could you please tell me the brand name of your Retractable Srewdriver? Thanks.
@CookieZ3353
Жыл бұрын
Always love learning this stuff from a female! Thank you!
@b.r.fleming1949
7 жыл бұрын
Hi, Karen, I'm mounting a fence gate to brick posts that I will be constructing. I'm wondering if I should mount the hinges of the gate directly to the brick or if I should attach a wooden railing to the brick post in order to attach the hinges. I also wondered if I should mount the anchors as I build the post or wait until the posts have cured and then attach the anchors. Any advice you have would be much appreciated! Bruce
@TheArtofDoingStuff
7 жыл бұрын
Hi B.R.! If you're attaching a gate to brick I would run a 2x4 or 4x4 (depending on the width and weight of the gate) up the brick and attach it to the brick using lag bolts. No need to put the wood supports in cement unless you're hanging the world's largest gate. Then I'd attach your gate and hinges to the 2x4 (or 4x4) like you said.
@b.r.fleming1949
7 жыл бұрын
Thanks so much!
@judyjudyjudy9593
6 жыл бұрын
I love chickens too!!!! I talk them just like you do!!! Thank you for the info. I have to do this soon!
@spike14501
4 жыл бұрын
Is caulk necessary when putting the anchors in?
@ChaseTran
3 жыл бұрын
Is it true that once you unscrew the hole is damaged and you can't screw back the same way?
@garagesale9976
3 жыл бұрын
Funny I enquired about getting a chicken yesterday only to find out chickens need company so I need at least 2. Today I needed to drill into some brick to install a garden hose real. So Thankyou very muck problem solved masonry drill bit I get tomorrow and maybe soon I’ll get some chickens. I’ll continue to watch to see what you do. Cheers!😃👍
@andreafouchia517
7 жыл бұрын
Hi Karen, You make it all look so easy! My problem is that I purchased a very heavy entryway hook and shelf, it is 60 inches long. I spent a good part of an afternoon assembling it with my 11 year old. The next step was to find the wall studs to anchor it to the wall and lo and behold, there are no studs. I remembered a worker telling me that I have drywall over a single layer of brick....very inefficient but none the less. I'd be drilling through the dry wall to the brick so I can't see where on the brick I'm drilling. Does it matter where the drill goes? into the mortar or brick? or both at the same time? and how deep should the anchor be? Any other advice?
@SonnyGTA
Жыл бұрын
Brick. Always into brick. Mortal will crumble.
@blameusa7082
6 жыл бұрын
Learned more about chickens than drilling
@2303scorpio
5 жыл бұрын
Hi im a new subscriber. I am going to be putting chicken wire fencing up but will need to put posts up first. Do i need raw plugs for the screws to hold the screw n fence weight? Love ur chickies btw way.
@shotsbylu7699
6 жыл бұрын
She has the “let me speak to your manager” haircut
@mikerowland1701
5 жыл бұрын
Trumps sister
@RasheedaBrennan
4 жыл бұрын
😂😂😂
@chobbs3384
4 жыл бұрын
If she's a Karen then we have to get the manager
@southbreeze6745
4 жыл бұрын
Haaaaaaaaaaaaaaaaaaaaa!!!
@cxxxxp9833
4 жыл бұрын
She seems more a "Sandra" than a "Karen" though... HIIIII CHICKENS!
@kakarroto007
4 жыл бұрын
Best 30 second video ever.
@missydiaz1
Жыл бұрын
Thank you for sharing. I came here because I tried the Ryobi masonry drill bit (Impact Rated Masonry Set (3-Piece) and it DOES NOT drill through the brick. 😒 What brand of masonry drill bit did you use?
@TheArtofDoingStuff
Жыл бұрын
Hi Yesenia. Sorry, I just got this message - I honestly, usually just buy middle of the road drill bits. Not the cheapest, not the most expensive. I can't remember what brand they all are exactly. ~ karen!
@light487
5 жыл бұрын
Great informative video. Very clear and easy to understand.
@charcoalanderson8010
2 жыл бұрын
When she showed the baby chicks the place where she was going to drill! 😂 I love it!
@tee5798
2 жыл бұрын
What if I need to go all the way thru? What's the name of that piece but longer? Trying to run wires
@anwarma1
5 жыл бұрын
What type of drill you are using ? Is it Hammer drill ??
@neilselman8575
3 жыл бұрын
Good advice ......never done this before ......all went well .....great clip
@professorprofessorson8795
Жыл бұрын
what kind of drill is that
@iramartin1679
4 жыл бұрын
what kind of drill is this
@tevion10
7 жыл бұрын
I think the reason the screws and drill bits not matching is that you would use a plug in the hole.
@seresinhe
3 жыл бұрын
Thanks for teaching us how to drill a hole in the brick......Now we need some chickens.
@pianobar7801
3 жыл бұрын
Very helpful, thanks for posting.
@shavedbald2
5 жыл бұрын
Thank you hun! Hell time trying find way do w/ regular tools, thank you.
@buffiehowe1609
4 жыл бұрын
I truly appreciate this awesome information
@randallledbetter7158
5 жыл бұрын
Might want to mention the need for a hammer drill too.
@antigen4
4 жыл бұрын
not in brick
@erickchurch5390
4 жыл бұрын
Randall Ledbetter Looks like she successfully drilled into it without a hammer drill. If you think a hammer drill is necessary for drilling into brick, you don’t know how to drill.
@zarrow50
5 жыл бұрын
so no wall plugs?
@Lasereyeswolf-Travel
6 жыл бұрын
Awesome video very helpful!! I'm seeing this from São Paulo Brazil! Thank you 😀
@pprincess9823
4 жыл бұрын
Hi This was great! I love the cute chicks! What kind of drill do you have? It looks really easy for you to put that bit in.
@talariswatts-el6174
3 жыл бұрын
Great video. Thanks for the info.
@howief86
6 жыл бұрын
those chicks are SO CUTE!! awww!! and thank you, i had no idea the drill bit had to be smaller. im doing a project with my brick wall in the house, and had no idea how to drill into it. thanks for this video! - Mommy Vee (Not my daughter in my thumbnail) lol
@InventiveMagic
6 жыл бұрын
What voltage drill are you using and is it a hammer drill?
@pumbar
5 жыл бұрын
It's yellow.
@rockingcancerwithtiawoman8630
4 жыл бұрын
Yay! Learned what I needed to know and saw some chickens.
@classycanadian
5 жыл бұрын
Was in for the drilling, but as a bird person, got hooked by the cute little chicks.
@pfsantos007
4 жыл бұрын
Tapcons (trademark) is another name for these screws that go into masonry, cement, mortar or concrete. Take whatever you want to hang so you know what diameter screw you need, then check the screw packaging and it will tell you what size drill bit you need. Small packs sometimes come with the drill bit. (Not affiliated with Tapcon, I just use them). Oh, it helps if you use a 'hammer' drill, since it vibrates/hammers the bit in as it turns.
@jadey8718
6 жыл бұрын
thank you !!
@jessicabaker639
Жыл бұрын
Can you link the drill u are using
@Teaspoon0406
5 ай бұрын
What screwdriver is that?? 😅 It's amazing!
@richardcarr7702
2 жыл бұрын
Nicely done!
@hulmad
3 жыл бұрын
Foxy lady, useful tips for drilling into brick. Adorable chickens. 10/10
@boujeeonabudget2477
Жыл бұрын
I adore you thank you for making this look easy☺️
@timeswithalzheimers201
4 жыл бұрын
I loved it. Thanks for the tutorial and thanks for the chicks!
@adycee2915
2 жыл бұрын
This is so cute. Those chicks 💘 In UK I've always only used a plastic expanding wall plug & screw to secure items for 30 years plus. Those fixing screws/ wall dogs are amazing xx
@southbreeze6745
4 жыл бұрын
And a big HI to the drill bits!
@d.g.f.6497
4 жыл бұрын
What size bit is that?
@jvs9511
2 жыл бұрын
Tapcon products tell you (on the package) what size drill bit is required for the anchor diameter....use what they say and do not guess.Guessing = trouble!
@Ukepa
Жыл бұрын
thank you, this is just what I need
@bluerabbit7245
4 жыл бұрын
Is that a hammer drill or a normal drill? Thanks for the video, love the chicks btw :)
@cxxxxp9833
4 жыл бұрын
I'm just here looking for the swinging chicken follow up video.. can someone post a link ??
@HeatherinTexas
4 жыл бұрын
kzitem.info/news/bejne/rKuDrWt7hJVlnZg
@foppo100
4 жыл бұрын
Depending what the holes are for mark the spot first.
@susanwynn2820
3 жыл бұрын
Great video!! Thank you!! Love your chicken swing!
@23royalace
4 жыл бұрын
She has a "sir this mustard is too hot" type of haircut
@scizzrhands
3 жыл бұрын
I was looking for instruction on Drilling into brick but now I am in Love!!!!!!
@colettethomson9462
5 жыл бұрын
Sounds silly but thank you so much for this vid! I could not understand why my drill wasnt working on brick, after countless videos this one helped me realised where I was going wrong! Now sorted - thank you! X
@richcramer3750
2 ай бұрын
Love this super helpful!!❤
@elephantarmy
6 жыл бұрын
Helpful, thanks! One of the commentators below mentioned something about the speed of the drill and that its important to use a drill that has the 'high speed' setting you used to drill. Fair comment? (i've no idea - not drilled into brick, ... yet! )
@brentsido8822
6 жыл бұрын
elephantarmy I drill into , brick, block, concrete all the time. I can vouch for that comment if your drill is a hammer drill put it on speed two. Even a standard drill with masonry bit could benefit from higher speed though give the bit breaks to cool off.
@snowhabibi6928
2 жыл бұрын
"hi chicken!" Got me hahaha
@tjwatts1207
5 жыл бұрын
30 seconds hahahahhhahahaha... thanks for the info :)
@smuflahi
5 жыл бұрын
Could say this one flew the coop
@waltermiscrimmons2281
Жыл бұрын
Thanks and good luck with the chicks!!
@coreyalbright3508
5 жыл бұрын
Good video and way to keep your audiences attention
@Kryojenix
Жыл бұрын
4:26 Suddenly I'm very nervous for those chickens? 😲
@lordpurchase9189
Жыл бұрын
You aren't seriously going to swing on that? Anyway good video. Here in the UK some bricks are very hard to drill with a masonry drill bit and requires another type of drill and drill bit. Your drill was so quiet.
@frankg.39
4 жыл бұрын
thank you
@RealMudSkipper
5 жыл бұрын
I love this. But let's not call it 30-seconds :)
@SILVER-523
7 жыл бұрын
Super cute that you took a second to kiss the chickens.
@TheArtofDoingStuff
7 жыл бұрын
I had to go back and watch it again, Gwynn. I didn't remember kissing the chicken. But yep. I did, lol. ~ karen!
@kristimeenan4317
3 жыл бұрын
I love this video so much! Helpful. Entertaining. Real. And short. Hitting the subscribe button NOW!
@xeviusUsagi
5 жыл бұрын
People keep saying, use a drum drill... But what if you don't have one. Buy one of curse... Well they aren't really free or cheap so I really think that the best thing to do is changing house it's much more cheap that buying a new drill
@northwoodsliving101
5 жыл бұрын
A hammer drill would be a bonus. Will drill twice as fast, easier on the drill bit
@eyobmesfin8634
4 жыл бұрын
thank you lady
@lesmurray3306
3 жыл бұрын
Coolest DYI ever! The baby chicks come before the "stuff". Ain't love wonderful?
@kevinos635
5 жыл бұрын
im sure those are chip board screws (WOOD)
@MrLike2surf
5 жыл бұрын
Karen, you are cuter than the chickens. Liked your video!
@derickfield2284
4 жыл бұрын
chickens cause rats and foxes
@MadeAnointed7
2 жыл бұрын
It’s one thing to drill into a brick wall without a respirator, and it’s another thing to blow out the debris. But inhaling all that silica dust you just drilled and blew out is on a whole new level.
@MrAndersonsNews
3 жыл бұрын
Did you use a hammer drill?
@timladusau5595
2 жыл бұрын
What kind of drill are you using?
@hbofbyu1
7 жыл бұрын
30 seconds?
@kevingraham2733
6 жыл бұрын
lasted 4.31 lol
@MerleUnchained
5 жыл бұрын
Quicherbitchen!
@chobbs3384
4 жыл бұрын
30 seconds of drilling. 4 minutes of chickens
@dawnolivo9645
2 жыл бұрын
I thought you needed a hammer drill for drilling into brick, no? I've been putting a couple of projects off bc I don't have one.
@karenbertelsen8340
Жыл бұрын
A bit late on my reply, but nope, lol. You don't need a hammer drill. Brick really isn't all that hard and doesn't need one.
@ronhendon6381
4 жыл бұрын
Great tnx !
@deanhenderson7940
3 жыл бұрын
Ok I think I love you! I love how you got distracted by the chickens and made me giggle, thanks for the tips and smiles!!
@RErnie-gv1hv
5 жыл бұрын
Fantastic landing gear.
@sunnyperezcid7283
2 жыл бұрын
Oh I've got to see the next video!!! :D
@davidpercival488
5 жыл бұрын
No safety goggles, no hand protection, no breathing filters. Oh, dear... The chickens are cute, but someone trying to follow these steps will loose an eye.
Пікірлер: 312