You make it look so easy, must be the clean shop.💯
@kcatv9556
Жыл бұрын
Thanks, appreciate you checking out the video!
@ElevationATV
Жыл бұрын
I was "NO no no, you forgot to put the rest of the grease in the BOOT!" Haha, then you caught yourself. Great install, I need to get me some of those clamps.
@kcatv9556
Жыл бұрын
Yup , that almost happened. LOL Would have sucked to remove that brand new clamp. Most likely would have ruin that new clamp trying to remove it. Thanks for checking out the video much appreciated!
@tamaracktr6411
Жыл бұрын
On an aaannngle!!! Love it!! What a great idea using the slide hammer to remove the joint! I've always used a brass punch while my slide hammer sits lonely in the corner.😂
@kcatv9556
Жыл бұрын
Oh no, lonely slide hammer sitting in the corner.. LOL Been doing it that way for years on cars at work. Thanks for checking out the video! Appreciate you dropping a comment!
@quaddingsous
Жыл бұрын
@tamaracktr6411 . . . You're famous world wide Big Dave! Bit of an aaaaangle! - LOL
@kcatv9556
Жыл бұрын
@@quaddingsous hahaha yup 👍
@phillipgroom9187
Жыл бұрын
Enjoy the repair videos, thanks for sharing! Have a blessed day !
@kcatv9556
Жыл бұрын
Hey Phillip, thanks for checking out the video, my friend!
@dirtbikeheaven1129
10 ай бұрын
I had a popping noise in my left rear axle on my 550 several years ago. I was able to buy a complete axle off eBay for less than $40 with free shipping. It’s still working great. The price was so good that I bought another axle just to have a spare. I haven’t needed it yet but it’s there if I do need it.
@kcatv9556
10 ай бұрын
Wow, that’s a good price. Especially if it holds up. Thanks for checking out the video!
@stevemiller4148
Жыл бұрын
Good job KC, been a few years since I’ve has to do a CV boot on anything. Can’t wait to see the next ride. Stay safe my friend.
@kcatv9556
Жыл бұрын
Hey Steve, thanks buddy Appreciate it. Appreciate you checking out the video.
@shawnantel8238
Жыл бұрын
I was waiting for a finger pinch with the boot pliers lol. Ask me how I know 😂can’t wait for the ride trip video hopefully the boys are back!
@kcatv9556
Жыл бұрын
Hey Shawn, Haha Yup have to be careful with the pliers be pinching a finger.LOL Yup I believe the boys are going to make our next ride trip in September. Thanks for checking out the video, my friend!
@garystrueby4995
Жыл бұрын
That was great timing. I have a 2000 400 Big Bear that the rear Boot is bad. Other than it having Drum Brakes don't you thing it's Similar. I only use the 400 around my small Acreage. I really look forward to your Videos. The only thing is I have a Polaris General Deluxe that I ride at the LOOP & LOTO in MO. I've been to Mulberry once in 2021. It was fun, but it's 6 hours from home. The other two are around 3 & I ride with Friends. When I went to Mulberry it was a one time trip. Keep up the great Work.
@kcatv9556
Жыл бұрын
Hey Gary, glad you like the videos. Appreciate you checking them out!
@rodneyfarwell3396
Жыл бұрын
Nice video! Interesting to see the inner workings of a cv axle. I've had a couple torn boots on the suburban but i just replaced the whole axle. Have fun on the next ride! We'll be wishing we were there but we'll have fun in Colorado too😎
@kcatv9556
Жыл бұрын
Hey mornin Rod, yeah, lotta folks just replace the whole axle when they have a torn boot. You guys have fun at Colorado and be safe. Are you going to do any filming? Maybe post some videos from that trip?
@rodneyfarwell3396
Жыл бұрын
I'm planning on taking the camera but my mic setup isn't set up right so not sure how good of video I'll get. Last time we were at mulberry in April I got just a bit of video before my camera mount broke and the audio didn't sound good so I've got some changes to do. But all my extra time has went to building my shop so haven't had a chance to mess with it yet.
@ManzanoManATVAdventures
Жыл бұрын
Nice video! I am just now getting around to it because somehow I never got a notification. I was browsing my subscription and noticed it this way. Anyways, you made this look really easy to take off and install. I like the homemade tool for the job. Probably cheaper to make it than going to other route.
@kcatv9556
Жыл бұрын
Hey buddy, yeah, that happens to me too. Don’t get my notifications. Hopefully that video will help some folks out if they ever have to do a boot on there Grizzley. Thanks for checking out the video my friend.
@czarandmaeve
11 ай бұрын
I liked your video for sure, and you seem very capable and knowledgable. I would appreciate in future videos if you would let us know socket sizes as your removing everything
@kcatv9556
11 ай бұрын
Hi Jeff, I will keep that in mind and try to remember to do that on future videos. Thanks for checking out this video. Much appreciated!
@robertpiontkowski2164
Жыл бұрын
Good video !! U really know what your doing !! Thumbs up 👍🏻 my friend!
@kcatv9556
Жыл бұрын
Thanks Robert!, Appreciate you checking out the video and for the thumbs up 👍
@fabianoteixeiragoncalves
10 ай бұрын
You are very professional. Congratulations 👏🏻👏🏻👏🏻
@kcatv9556
10 ай бұрын
Thank you appreciate you checking out the video!
@jurgenmeiler9663
7 ай бұрын
Saubere Arbeit super erklärtes video.
@kcatv9556
7 ай бұрын
Thanks for watching!
@quaddingsous
Жыл бұрын
Nicely done laddy! Nicely done! (that's what our soccer coach used to yell at us when we were kids - lol) 1:07 - HAHAHAHA!!! Too funny!
@kcatv9556
Жыл бұрын
Hahahahaha! She’s bit of an aaaangel haha right on buddy thanks for checking out the video!
@quaddingsous
Жыл бұрын
@@kcatv9556 . . . I passed on your video to the originator of that saying, "Bit of an aaaaangle", Big Dave from TamarackTR and told him he was famous - lol. I see he left you a comment. Nice!
@TNCowboy2012
Жыл бұрын
Have you guys posted the episode with the Dirt Obession guests yet? I don't want to miss that one.
@kcatv9556
Жыл бұрын
Hi Bruce, we did not do a ride with the Dirt ObseXXion boys. Thanks for checking out this video. Much appreciated!
@johnwilliam6638
Жыл бұрын
Great information
@kcatv9556
Жыл бұрын
Hi John, thanks for checking out the video!
@normsatv
Жыл бұрын
Great tip weld nuts together 👍
@kcatv9556
Жыл бұрын
Hey Norm, yeah buddy thanks for checking out the video, my friend!
@johnwinkler6892
Жыл бұрын
Nice job...
@kcatv9556
Жыл бұрын
Thanks!
@ArcticExploring
Жыл бұрын
Nice help how to change it.
@kcatv9556
Жыл бұрын
Hey buddy, you’re welcome. Thanks for checking out the video.
@possleaholsteinspossbrofar8429
Жыл бұрын
I end up just breaking the axle in two😂. Boot would be much cheaper but same amount of work.
@kcatv9556
Жыл бұрын
Haha yup I guess that would make it easier to get a part LOL! Thanks for watching and dropping a comment
@diegosantisteban9661
4 ай бұрын
PLEASE SOMEONE KNOW THE MEASUREMENTS OF THE DUST GUARDS OF THE YAMAHA GRIZZLY 700 2016
@kcatv9556
4 ай бұрын
I don’t know what a dust guard is on a grizzly. Not sure what you’re asking? Thanks for checking out the video.
@nathanwhite509
3 ай бұрын
What pliers are those!? Can you send me the link sir?
@kcatv9556
3 ай бұрын
Hey Nathan, they are standard automotive CV boot clamp cramping pliers. I believe I picked him up at O’Reillys auto parts many years ago. Hope that helps you out, thanks for checking out the video.
@nathanwhite509
3 ай бұрын
@@kcatv9556 thank you! I found them! Very good video 👍🏻
Пікірлер: 51