Ever since the dawn of time men everywhere have asked this question "Does my head or my shaft provide better performance?"
@Misanthrope5150
5 жыл бұрын
I had no idea that the weight more towards the rear caused the face to close more quickly. Great info!
@daguri87
2 жыл бұрын
The best Christmas video to treat myself. Such a great video, still watching this video after 3 yrs. Thank you!
@NWP4440
6 жыл бұрын
I’ve learned more about clubs and fitting in the last few weeks since I found your channel....more than in the previous 7 years when I started playing.
@patrickbeach5915
2 жыл бұрын
4 years later...I go back and watch these juat in case I forget things like the CG locations and rotation ...crazy good stuff
@mcalette
5 жыл бұрын
Maybe the best golf video I have ever watched. Keep up the exceptional work on these videos.
@judenwaiwu4583
5 жыл бұрын
This is so amazing. in March i spent so much money at club champion in Illinois for my full bag fitting. I can tell you that i did not receive 1/10th of the informations you have giving plus I can't even play with the driver i was fitted for. I wish i knew about you ,I would have flown to Canada to see you guys
@sch5961
4 жыл бұрын
jude nwaiwu exactly how I feel. Spent 5,000 last July w CC, ended up using something else. Wish I just went for a real fitting w TXG!
@salvatoresanjose712
4 жыл бұрын
same here. Spent USD5,200 and the clubs ended up in the basement after 3 mos.
@simonsuddons5652
6 жыл бұрын
Great content again. You guys are raising the bar each week on what we golfers ponder when looking at equipment. You help us narrow down what to test and what to ask when we test. If we encounter a lazy fitter it easier to spot that now. Fine tuning equipment can be tough for amateurs. I suppose it’s too what level we want to tune to though!
@brianbillings6815
Жыл бұрын
This should be your pinned video. I recently got "fit" at a box store for the PING G425 LST but when I got to the course and played several rounds. As a single digit handicap who plays sporadically I was constantly hunting for decent contact and couldn't feel the head in space during my swing. Measurably one of the most forgiving drivers but I was all over the course. Took me a while to get my swing back because it had messed up my swing timing and confidence. Went back to my old driver, which I know doesn't fit me the way I'd like, and gained 30-50 yards and doubled the number of fairways hit in a round. One almost can't pick their own driver and expect success with the variety of shafts and heads on the market. If your swing is professionally solid you could get away with an I'll fitting club for a couple rounds but it bleeds into the rest of your game.
@mcfly2727
6 жыл бұрын
Would love to see a vid where you take us through the proper A to Z of types of shaft with examples of each type. Tip flex, counterbalanced etc the whole kaboodle
@curtismorgan1062
4 жыл бұрын
I know this video was uploaded 2 years ago but this is a great video!! Such good information and put in an easy way to understand it. I know I’ve personally always been told the shaft is the engine of the club and most important, however, this proves otherwise! Thanks for the awesome info and great videos!!
@tomburns9732
3 жыл бұрын
I am always amazed at how much information you give out in these videos. Great job guys!
@craigtalbot9316
6 жыл бұрын
Guys I'm sorry but I hate these videos.....thats because I'm in Northern Ireland and u guys are the other side of the world 😂😂 this makes so much sense and probably tells me why when I've been fitted the results haven't always worked. Ian get back over to Scotland then I don't have so far to go lol. Love this channel 👌👍
@jwfriend6952
2 жыл бұрын
Wealth of knowledge and information. All fitters need to step there games up. The bar is high after watching TXG. Great job men.
@kevinconnolly754
2 жыл бұрын
absolutely awesome video, i had a big hooking problem with a rear weighted driver, changed to low spinning front weighted driver and the hook is a 3 yard draw at most and can actually power fade it if needed
@NPD-lk7ii
6 жыл бұрын
I think it would’ve been interesting to have also seen the difference between the high spin shaft with the high spin head vs the low spin shaft with the low spin head, just to show the extremes on both ends. Maybe in another video? Either way, another great video guys!
@michaelgeffre4009
5 жыл бұрын
Absolutely the best fitting video i have ever seen!
@taylormilton3
6 жыл бұрын
This is a great topic. I've recently been doing some work with driver heads and shafts. My favorite 2 shafts. Graffaloy Blue(white shaft old school) 75x, and the Atmos Black x. With the Graffaloy the G400 9.0 is the bees knees, with the Atmos the 8.5 G400 LST is the business. Two different setups exact same distances, launch, spin. However if I flip the shafts to the other heads... completely out...of...wack!
@vito4461
6 жыл бұрын
Basically the advice I received during my driver fitting with my 915, nice to see the proof with another golfer. Great work guys
@landonmaunula
6 жыл бұрын
Great video as always guys! super valuable information. the way you can differentiate yourself with Ian's vast and extensive knowledge of golf fitting is world class.
@anthonymckenzie7951
6 жыл бұрын
Awesome video guys, once again! Very educational - I always get smarter watching you guys. Keep 'em coming guys!
@brentkrug
6 жыл бұрын
I found exact same thing last year.....I had almost identical numbers with Tour AD MJ 6s and Hzrdus black 65 6.0. The peak height and spin were super close but MJ def feels better and more active. I thought that was very strange but Matt proves it is all about how shaft releases and the individual swing. It seems like low and high launch shafts tend to vary and are relative to the person..... but what does change almost always is the overall feel. The softer profiles always feel more active
@shanedmcqshanedmcq5496
6 жыл бұрын
Brilliant video lads again!!!! This will help many golfers understand the whole shaft head combo ...
@Mjwest23
6 жыл бұрын
Appreciate the explanation of the CG forward or back for face angle. Makes sense. Will help me tinker with my M1 on the range. Have already seen nice success with it this far on a launch monitor. I tried with the weight back and actually didn't see as great of success as I thought I would. Weight forward was better in the first 25% of the track. One of the reasons why I went with the M1
@neilstableford3831
6 жыл бұрын
Great video again guys!! I change between heads XR & XRPro to have anti right (XR) and anti left (XRPro) options plus high or low too. Found this from trial & error NOT knowledge!! As you say Ian you're giving us nuggets of pure gold info!!!
@elmatador7528
6 жыл бұрын
Just makes me want a fitting by you guys even more .... unfortunately I’m in UK
@notbyalex
6 жыл бұрын
This is exactly what I was interested in, great video!
@mattsheehan5033
6 жыл бұрын
Fantastic video! That information about the CG impacting the clubs closer rate through impact blew my mind!
@clemfisher5727
6 жыл бұрын
Fascinating information - just could not get used to you swapping positions on camera
@mcfly2727
6 жыл бұрын
Love this. Goes so far to silence those who reckon shaft doesn't matter that much it's just reg..stiff and x stiff...(then why so many options I say!!) 👍👍
@colem94
6 жыл бұрын
Fitting booked with Mike on the 14th super excited, thanks for releasing these guys!
@whiskerrub3821
6 жыл бұрын
Stop it. Every video makes me want to book a flight to see this for real.
@christopherlafreniere7141
6 жыл бұрын
I'm with you, a ticket from where I live is only $175
@Disturbed7100
5 жыл бұрын
@@christopherlafreniere7141 Casual $3000 AUD for me. For a return flight. It'd be a dream to be fitted by these guys, but bugger me the flight is more than the clubs.
@adamsalvatore5039
4 жыл бұрын
You guys are incredible! Thanks for all the helpful demonstrations and explanations!
@PbD187
2 жыл бұрын
I put a Tour Z Xtreme 455 M4 in my OG M2 head, winning combo!
@bertrangb
6 жыл бұрын
Thanks for another great video! I'll use this informative session to confirm to the guys who stick to the dated rhetoric of all drivers are the same and shafts are more important. The tip of the day was the closure rate affected by CG. I knew this from a putter fitting years ago, but failed to apply that knowledge to my recent driver search. Cheers! Brad
@maz_mtb3266
3 жыл бұрын
I'm just using a box-kit set of clubs. I hit on a sim one day with my driver and was over 4k rpm spin. I know if it has any head wind, it dives down like a rocket. Swing speed is 108 when relaxed, up to 115 if I start trying to push it up. Part of me thinks this stock shaft is really killing me, but probably the head is pretty basic technology being entry level box set.
@GRUNGELEOPARD
4 жыл бұрын
You 2 are amazing total devotion is inspiring, especially from the navy cut, impressive.
@Ryan-fx7jx
5 жыл бұрын
My only problem with fitting heads is what if you're one of those people that want a certain brand and don't want to go switching heads and might have an option of only 2 heads that possibly might not 'fit' them optimally.
@xNIKEGOLFx
3 жыл бұрын
So regarding the fact that most pros hate the "left" miss, is that a big reason they play lower spin heads as that doesn't want to go left as often as higher spinning heads? Learned something new I never new CG location front/back could affect dispersion!
@ClintWilber
3 жыл бұрын
It's amazing watching this video from 2 years ago how much Matt's swing has changed. He now appears to be much more controlled at the top and not so long as he was in this video. While this was a video about shaft flex which I'm sure had a lot to do with his erratic ball flights, I bet his swing also has a lot to do with the reason he hits it so much straighter now.
@clubchampionmedia
3 жыл бұрын
👍 100%
@ahmadhanifah617
6 жыл бұрын
Love the video...My misses tend to be hooks with my M1 2016 10.5 Tour Ad BB 6S...Might try moving the weight forward to reduce my hooks slightly...
@Raswingjones
6 жыл бұрын
This info is so great ....wisdom and learning ....every video of this nature is priceless!!!!!
@TC-ps9sd
6 жыл бұрын
Excellent test showing how a head dominates the results. Would love to then see the GD high launch shaft with the G400 Max to see how much the different shafts affects the results with a particular head.
@brianmccool9728
6 жыл бұрын
Fantastic video. If I could only afford the plane ticket to come get a fitting!
@garythompson9439
6 жыл бұрын
I always find it a very interesting process drilling down to see what head/shaft combos work best...would be curious to see how Matt's current gamer stacks up against other extreme combos and what, if anything, he gives up in his drivng numbers when playing golf vs pure long driving.. A++ gents !!
@jasmyshahdi5272
5 жыл бұрын
The best golf channel
@oakcctrk
6 жыл бұрын
Another great video! I’ve always looked at it like the head is the engine and the shaft is the type of fuel. Putting premium fuel in a v10 will for sure help it run at its optimum but putting premium fuel in an i4 will never get the same performance as the v10 even with regular. Two completely differently designed engines for 2 different purposes.
@pieman6999
4 жыл бұрын
Fascinating stuff, love adding the science into what for me has always been "feel". Even as recent as a TS 2 / 3 fitting i just found the center of the TS3 so much more consistently when everything I believed had it the other way and I haven't been able to figure out why!
@hoopsfever82
6 жыл бұрын
As everyone else has said, truly fascinating and informative videos, and so very well explained. Who knew a trip to Canada would become serious consideration for vacation planning 😎
@greatpar
6 жыл бұрын
Brilliant as usual. The use of weights was very informative. Cheers
@hi2meb
6 жыл бұрын
Another great video, very interesting and informative. I have my driver fitting today with Cool Clubs in Irvine, CA. I’m hoping I can get a “10” also. I really like what Ian said “we measure, we don’t guess “. My life’s motto “one test result is worth a thousand expert opinions “. I’ll let you know how the fitting goes. Thanks again.
@andrewmacrae3291
5 жыл бұрын
what whisker rub said! "Stop it. Every video makes me want to book a flight to see this for real." hoping you guys culd shed some light on this situation for me.....im generally a slice/fader of the driver and that was fine (as a lefty) when i could aim down the right side and worst case end up on the left side or sometimes right side when it goes straight. recently started to square up the face to the path and started hitting dead pulls and as we all know if you miss left and right youre up the creek. im also a high launch crazy high spin player. besides the obvious (fix swing path), whats the best direction to head in terms of heads/shafts so i could try to eliminate that pull right. i was always thinking get something with weight forward to reduce spin but if that means less draw bias thats not going to be a great help either.
@monotts5218
6 жыл бұрын
Thank you...again. For me the problem you Guys create with your excellent and very informative videos is that I'm here in the UK and on the one hand thinking "you are exactly the Boys I need to go to", but on the other hand thinking "I have no idea who, if any, will have the depth of knowledge you demonstrate day after day and give me what I need", e.g. Ping charge £30 for 90 min bag review and I can see me going there and coming away feeling "OK" but thinking "Well it was only £30, so what do I expect?". You Guys have raised my perception of Club Fitting and with it the expectation for ordinary Club Golfers like me. Shame you're across The Pond.
@kevinreynolds4105
6 жыл бұрын
Been to Jason for a fitting. Fantastic job into a VA great vids guys.
@BaBaBooeyWRLD
5 жыл бұрын
Kevin Reynolds VA?
@Boss302ATC
6 жыл бұрын
If it hasn't been a vid you have done yet, would love to see a compact video on how/where you strt to fit someone for an entire bag. I am really interested but would live to know the starting and end point. And scared that I would have to replace the entire bag too!
@robvivian7182
6 жыл бұрын
Once again a very useful video. Look forward to all your new videos!
@mohdsharefabdulrahman6089
6 жыл бұрын
Ian & Matt, there's always something to learn watching your videos. I never knew the impact of CG position in a driver and 3 wood are different thus requiring different shaft bend profile. Actually I've wondered for quite a while why driver and 3 wood shaft are different in most bags I've seen. Now I know why. Thank you for the continuous education. I'm interested for the follow up videos of the iron shafts you did recently. I'm saving for the NS Pro Modus 3 120 for my MP 69 heads. Great videos guys.
@spidey.bh1144
6 жыл бұрын
this was amazing, what about a video like this where you take a driver like an m3 and try it with weights in the front and a low launch shaft, and then the weights in the back for a high launch shaft? thanks!
@HollandProductions_CA
5 жыл бұрын
Wow I learn so much every video
@brettsteven3244
6 жыл бұрын
Sweet video guys....like others who have been commenting I learn so much from your videos
@banditbaker1675
6 жыл бұрын
Another Superb Vid Gents and so informative! In the few months that I have been watching your vids I feel that I have learnt more about golf equipment and performance, than I had in the previous 45 years of playing golf. You also helped me answer an internal debate I have been having, about whether I should re-shaft my Ping G30 SFT (to gain a few more straight yards) or to start testing a new head/shaft combo, (probably the Ping G400 MAX or the Rogue Draw bias). My conclusion is that I am going to save my Cash and get Sam to hit my drives for me with his super new Driver!!!! I just hope he doesn't mind moving to the UK? LOL
@clubchampionmedia
6 жыл бұрын
😆😆😆
@GodlyNate69
6 жыл бұрын
Guys, just want to say amazing video, very interesting to that CG affects face rotation! Amazing
@rayfarrell9482
6 жыл бұрын
This is interesting. I’ve got the GD MJ R1 in my G400MAX set at 9.9 and love it. 88 mph swing.
@OpaKnows
6 жыл бұрын
Great learning time, gents. You've answered my question from the last video as well. This information alone should gives folks pause before they lay down $500 or more for an off-the-rack driver. I know I've learned my lesson.
@philliosr3615
6 жыл бұрын
Wow really didn’t know that fact about moving weights forward and back in the head. I’m gonna try it out on my skytrak with my cobra woods to see what happens. Great 👍🏻 work guys.
@bigiron1219
6 жыл бұрын
Wow. I think that sums up the work you guys do.
@davidchalloner5582
6 жыл бұрын
Would have loved to see you guys finish the video by Putting the Accra in the Sub Zero and seeing that combo or even the Ping with the softer shaft so the test could come full circle!! But incredible content as always guys!
@andybibby4091
6 жыл бұрын
Fantastic video lads, really really great watch and great info 👍
@2Bad.
6 жыл бұрын
Another educational video - keep them coming !!! Using the same shaft in both heads would have been interesting to watch.
@clubchampionmedia
6 жыл бұрын
Would have just been pretty similar results to what we tested. The idea was to show that even a counteracting shaft profile couldn't overcome the characteristics of the clubhead itself.
@jonasandersen2126
6 жыл бұрын
Like that you're never rushing the videos! If it takes 20 min, it takes 20 min! Leaving in the shots Matt is hitting and stuff like that is just perfect. Great video
@cfny83
6 жыл бұрын
Clubhead is king. The shaft for me is only determined by the delivery characteristics of the golfer. Also there tempo, swing speed and speed through the shot.
@Drjeremy6060
6 жыл бұрын
Super video guys. Always interesting. See you in May.
@eddiefurlong8917
6 жыл бұрын
Just wanna say I truly enjoy watching your videos. Definitely the most informative channel I've ever watched. Any chance you guys come to the States and do some fittings? I'd sign up in a heart beat!
@breakandrun70
2 жыл бұрын
Ian's the man when it comes to matching the head to the shaft, he proved it when he hooked up the gamer with a set of clubs. I need your phone number so I can book an appointment with you the next time I go to Ontario. Great video by the way.
@StefanBirdie
6 жыл бұрын
Very good and informative video. Keep them coming 👍
@ericherring3321
6 жыл бұрын
Another Great video guys! Keep up the good work.
@paulleary9054
6 жыл бұрын
That explains why with new ping g lstec I'm getting a gentle left to right fade. Which is way more controllable than my hooky flight with old driver.
@bogeygolfer3151
6 жыл бұрын
Really really informative - thanks
@lovepeacewar32
4 жыл бұрын
Ian! You are an amazing genius!
@moodswingcafe
6 жыл бұрын
On the topic of clubhead rotation. I am using oversized grips to help me in this matter. So far, from my personal experience, it has helped me. However, I do understand oversized grip is not for everyone. I am a 10 finger grip, so it fits, imagine those with interlocking holding big jombo size grips, it would be very hard. But there is another advantage on oversized grip which I realized later, it is heavy, and acted as a counterweight when swinging. Perhaps you can tinker on oversized grips, would love to see your input.
@barrymills8597
5 жыл бұрын
Another really interesting video guys. I honestly think mat could use triggers brush and still kill it!! I’m looking for a new driver just now as my Titleist 917d3 is not giving me what I feel I should be getting from it. Got it set to 8.75 degrees with the Aldila a rogue stiff shaft and still hit it far too high with 3000 to 3500 revs. Wish you were still in Scotland Ian. PS my driver swing speed is 100mph
@clubchampionmedia
5 жыл бұрын
Look for a lower spin head Barry (TS3, Rogue SZ, M3, etc.)
@davidmalone4017
3 жыл бұрын
Terrific video!!
@jonathancane8631
6 жыл бұрын
Really interesting thanks fellas, would be great to see results for all 4 options too, Accra with the sub zero and ad with the g400 too. Could really see how much each head affects Matt's flight.
@storieswithaly1247
6 жыл бұрын
From my point of view as someone that has gone through two fittings and in the middle of a third to find the right driver combination some of the things you covered here was most revealing (especially as I exactly trying to reduce the pull - shot to the right as a lefty. Worrying thing is that the fitter is suggesting heads that indeed are - based on what you suggest here- actually likely to exaggerate this even more. Given the low weight shaft I need dont know if this is a compensating factor or not - your test suggests otherwise. That being said a further point made that somewhat validates what you suggested at the end, namely playing with the loft is borne out by what I did independently with my current gamer and that was to self adjust the loft down that helped reduce the pull exaggeration but then I clearly destroyed that equally by adding more weight at the back which while giving me higher launch (for someone with a negative angle of attack) exaggerated the pull ian’s twist or movement of the face point. Hence my desire to look at and try out the mizuno st180. Gives me some ammunition re discussions with the fitter though I am concerned that he is not so proficient and knowledgeable as yourselves - time perhaps to change fitters again (running out of options!). Any reactions or advise??
@clubchampionmedia
6 жыл бұрын
Having tried most if not all of the 2018 drivers, I can say the ST180 is very anti-right for us left handed players. Your other good anti right options being the G400 LST and Rogue Sub Zero. A stiffer profile shaft will help reduce the hook as well, and with the ST180 Mizuno offers the Tensei white as a stock option which is very good in that regard.
@storieswithaly1247
6 жыл бұрын
TXG Tour Experience Golf thanks helpful. As mentioned probably need to go to a different fitter and to check who might carry these left handed heads. Thanks for the options to consider. Also on shafts and shaft length they recommended 44” (being short too) and they do not use or recommend stock shafts but rather ones like oban or slay. I tried the oban devotion 4 4 with the m4 driver which is what they were recommending but inly after four swings. Interesting you mention tensei white and seems to makes sense. Ps in my two hybrids which I hit well and more consistently and for me get the distances and trajectory I am happy with I have the Fujikura pro XLR8 63 (19 hybrid mizuno clk) and the fujikura pro 75 (cobra f7 22 degrees) respectively with seingweights adjusted to d1 but both cut slightly down (39.75 and 39”) in respective lengths. Perhaps I need to think about making a dedicated trip to you guys overnight for a detailed session😋. Though a long way to go and have not been to Canada since 50 years ago! Thanks again
@storieswithaly1247
6 жыл бұрын
TXG Tour Experience Golf a further question. Have you ever done a test or fitted someone with a utility driver as a replacement for the driver - something ai am reflecting on given my difficulty of finding a driver that becomes my friend not my enemy. Notwithstanding trying the st180 etc when I can I am selling off my current driver (and will use my trusty 3 hybrid for now for teeing off) and indeed my 5 wood too. Given I have the srixon z565s although probably still more offset than would suit me, I am thinking about whether one of the following might make a good option to look at alongside drivers to replace it- tmb; MMC flit hi; srixon u65; (obviously appropriately shortened and with a shaft that suits me) ; Taylor made p790 udi ; pig 0311x; or the new Taylor made gapr clubs being released shortly. Noting my swing speed with the driver is in the 90s also. Really looking to get consistency and reliability and for me a carry of 220 yds or so (avoiding the pull). Cheers
@thebigeasy8609
6 жыл бұрын
Love your videos guys...So interesting and informative.
@JohanSchmidt
4 жыл бұрын
You should do a video of the same head (high& low launch) with 2 different high & low launch shafts
@headbanger1992
6 жыл бұрын
wonderful insights, eye opening
@robo265
4 жыл бұрын
Great video thanks wish you were in Europe
@terrorfactoryfilms
3 жыл бұрын
Thanks for all this great information. I have been talking to a fitter who told me his approach is to fit players into a shaft first, and then work on finding a clubhead that's a good match. After watching this, not sure that's the best approach?
@ripyerballs
5 жыл бұрын
This is with out doubt the best video ever released about golf heads and shafts on KZitem a classic
@claytonpeirens272
6 жыл бұрын
Another eye-opening informative video. You should open a shop in Calgary so we can get a great experience you offer to your customers. Excellent job, gents!
@thebrownviking9523
4 жыл бұрын
Good Canadian lads! Great work.
@thejimkennon
4 жыл бұрын
Amazing video guys 👏
@paulbown3960
6 жыл бұрын
Another top video Thanks boys
@beaubanfield9635
6 жыл бұрын
Just love what you guys are doing!! Please keep it up. Can’t get out yet in Ohio, but the videos ease the pain of no golf.
@Stewwwwww
6 жыл бұрын
Brilliant thanks guys
@bestgolfsimulator5018
4 жыл бұрын
I always thought the shaft was the difference-maker. This was eye opening. I’ve got a M2. Does anyone know what spin category it is in?
@Clyde__Frog
4 жыл бұрын
Recently brought an m2 and was wondering the same thing! It looks more similar to the g400 in this video, with the weight quite far to the rear. Its definatly been a fairway finder for me so im guessing its spin is on the higher end.
@brentkrug
6 жыл бұрын
I know you did it in purpose for video apples to apples with loft....but would be interesting to see if Matt would fit Rougue SZ better if weight was all the way back and he tried a higher loft......His spin was crazy low obviously.....with 9* and weight juiced forward. Personally, I hate the feel of any of the clubs with the weight moved forward.....feels more solid with weights maxed out in back and easier to shape (-:
@trippjay1117
6 жыл бұрын
Would love to see you guys test the Fuji Atmos shafts!
@christopherpompilio4165
6 жыл бұрын
Great content as always. Can we see the rogue sub zero with the accra just for fun!!!!
Пікірлер: 252