The sound could be traveling through the drive shaft because it sounds just like the output shaft bearing in the transfer case. My 99 Suburban had the same noise. There is a plastic retaining ring in the bearing to keep the balls in place and it starts cracking and lets the balls move around in the bearing. Replaced it with a sealed bearing and no problems.
@brandonleicht3547
2 жыл бұрын
Hey I have a 2005 Silverado 1500. I have the same noise problem with my truck. Would I be able to replace the output shaft bearing seal from under the truck?
@Macdonald-we4gx
11 ай бұрын
And get a new snap ring or even 2 in case u fuck one up snap ring pliera off amazing a large pair or medium size plier the case comes off u gotta take that rubber boot off have a headlamp sit it on the work bench and get the snap ring off the output bearing so the case can slide off after u take all the bolts to the case off there easy to work on if ur mechanically inclined there like a simple chain case kind of
@nolanhill77
5 жыл бұрын
God almighty, you gotta let us know. HOW DID YOU FIX IT MAN. We know what it sounds like, throw me a bone!
@melspicer7476
8 жыл бұрын
Had the same issue. First there was a rattle sounded like it was coming from the center of my drive shaft. Then it got so bad it was causing vibration at various speeds. I had removed and checked the drive shaft to see if there was play from bad u-joints. They appeared to be fine. I ended up replacing the drive shaft. When I removed the drive shaft for the second time to replace it I noticed that the slip yoke was seized up and would only pivot one way. At closer examination I found out that the u-joint at the slip yoke was blown out. You could see the needles and that the seal had failed. Make sure your slip yoke moves up and down and side to side. I had already ordered a new drive shaft that came with a new slip yoke and u-joints already assembled so I went ahead and installed them. Everything works as it should now. Hope this helps you all.
@Dan.mapp.
8 жыл бұрын
Thanks for that update, I'm going to check mine out this weekend
@melspicer7476
7 жыл бұрын
***** hope this fixes your problem.
@forte6195
5 жыл бұрын
Did this work??????
@Reallifenewz
5 жыл бұрын
Aluminum shafts go out of line easy, thus fail easy. The bad part is they destroy transfer cases and transmissions without you knowing
@Reallifenewz
5 жыл бұрын
Advice , get rid of that p.o.s. alloy shaft. My experience level rose after my third set of universal joints and a loose trans case. Took 100k miles for me to discover. 02 Z71
@RaulTorres-dg5de
6 жыл бұрын
I had the exact same noise. on 09 chevy Silverado 1500 long story short I replaced the drive shaft. and no longer have that problem
@jpepe-qg4qj
4 жыл бұрын
Mine aluminum and making the same noise
@spacejam6460
2 жыл бұрын
Hey bro did it sound like come que rechinaba ?
@arod8596
10 жыл бұрын
Rocks inside the drive shaft lol
@derrickpitman4042
6 жыл бұрын
I have the same noise coming from mine. I think it's a bearing in transfer case or rear end... High speed it stops.. I just drove mine over 200 miles yesterday and didn't make a single boost going down the interstate.
@adalbertovalencia7862
3 жыл бұрын
I had that problem on my truck,replace the u joints and went away, that was my case!!!
@landenshinaberry8718
3 жыл бұрын
Me too
@MrBen527
8 жыл бұрын
There are service bulletins out for this issue. My drive shaft and yoke have been replaced under warranty already. I still have another sound coming from the shaft and I may address that this weekend. I'm thinking of insulating the shaft to hold down the noise.
@hondaxl250k0
10 жыл бұрын
prob weld spatter.. or some people throw bb's in them to aid in balancing and cut vibration.. idk if it actually works. but ive cut a few shafts and found bbs and spatter in them also have found oil and sand.. most likely hillbilly engineering in hopes to balance there home cut shaft.... hope this helps..
@A42yearoldARAB
5 жыл бұрын
Mine is on my jeep making thudding noises and it is the front one. Also have a scraping noise either from the shaft of dust plate ugh.
@eddiefromcali
8 жыл бұрын
Jake....wtf was the problem? Got the same got damn noise on my ccsb.
@osvaldo2460
5 жыл бұрын
eddiefromcali same here it’s driving me insane
@lapituska
2 жыл бұрын
Did you find out what was happening?
@eddiefromcali
2 жыл бұрын
@@lapituska u joints
@MoDave82
2 жыл бұрын
Sounds like a j joint or something rolling around in the driveshaft or wheel or rear end
@ethangunnarson7898
6 жыл бұрын
In my 2000 gmc 1/2 ton it ended up being the rear end. Had to replace it.
@panchoaguilar1910
3 жыл бұрын
Got an 07 Tahoe , makes the same noise any idea ?
@lapituska
2 жыл бұрын
Did you find out what was happening? Descubrió que era?
@Dan.mapp.
8 жыл бұрын
did you ever find out what was inside? i recently started hearing metal rolling around inside my front driveshaft and have no idea what it could be
@melspicer7476
8 жыл бұрын
+Dan Mapp FIGURED OUT
@indizona4610
6 жыл бұрын
I have this exact same noise ! How did you fix it?
@monu1234567890123456
10 жыл бұрын
my 2007 ls2 corvette is making the exact same noise im sure most of the drivetrain is similar. have you figured out what is wrong
@huberheinrich3921
11 жыл бұрын
same Shi**y noice on my 97 F150... changed transfer case Fluid, but didnt help... pls contact if you have fixed it!
@lapituska
2 жыл бұрын
Did you find out what was happening
@lapituska
2 жыл бұрын
?
@danieltv23
9 жыл бұрын
My 2003 Chevy suburban is doing the same thing did you figure out what the problem was?
@lapituska
2 жыл бұрын
Did you find out what was happening?
@juanlara4676
9 жыл бұрын
I just stared having the same noise on my 99 tahoe.. i cant find the problem.. Have you figure out what the issue is??
@patrickkobal3608
6 жыл бұрын
Juan Lara I’m having the same issue with the same vehicle. What did u do to fix it?
@trevordolly4628
6 жыл бұрын
Patrick Kobal Same haha
@jwill9877
6 жыл бұрын
Probably one of the universal joints on the drive shaft. They are 13 dollar parts on Amazon. Get the greasable kind
@lapituska
2 жыл бұрын
Did you find out what was happening?
@juanlara4676
2 жыл бұрын
@@lapituska Yes I did, the the tahoe is 4x4 an it was the transaxle, so I had it rebuilt..
@lemuelmendez4172
4 жыл бұрын
Did you find the problem?
@lapituska
2 жыл бұрын
Did you find out what was happening?
@coler3536
4 жыл бұрын
Has anyone figured this out by chance? Having this same issue.
@lapituska
2 жыл бұрын
Did you find out what was happening?
@bobvincent4841
5 жыл бұрын
Take it to the driveline shop. They'll cut the end weld, dump the offending debris out, and weld the yolk back on and then balance it. I'm in Nebraska. Take my drivelines to Inland Truck Scottsbluff.
@lapituska
2 жыл бұрын
How much cost you that repair?
@bobvincent4841
2 жыл бұрын
@@lapituska I think it was about 50
@TheRedZ71
11 жыл бұрын
Is that normal?
@jarrettdixon9850
5 жыл бұрын
Anyone ever find the problem? I have a 06 Silverado doing the exact same thing
Пікірлер: 64