Thank you for this! My son and I installed new injora steel drive shafts on one of our TRX4m trucks today, and we made sure they were “the same” (lol) on each end. FYI: just learned the term “phased” in the world of drive shafts! I’m going to see if we have the grub screws installed the same in each end now. Thanks!
@gerrysoldguyreview
2 ай бұрын
Your are very welcome!. Always glad to hear about some father /son RC time 😁
@TachyonDriver
2 жыл бұрын
Late to the party here from across the pond. You said the phasing is "only a little thing", but it really does affect the small trucks too! I have an FTX Outback 3 mini (RGT outside of Europe). That little 1/24 scale Defender was shaking about until I learned about phasing driveshafts! Happy RC'ing sir!
@gerrysoldguyreview
2 жыл бұрын
Thanks!! It is amazing that a condition so common to full size transfers over to tiny trucks!! Good to know how much full size tech is showing up nowadays!!
@SFDFLATH12
3 жыл бұрын
Thank you very much Gerry. That was a the exact answer I was looking for when I asked. I had seen a couple 1:1 examples but this summed it up perfectly for tiny trucks. I actually think you may have just solved a problem with my little JJRC Q65 project. Can't wait to get to the workbench to check it. "Grubnut". That would be a perfect name for a rig or for a trail in the EXOPLEX. LOL Thanks again buddy for taking the time to answer my question. Stay safe and stay tiny. Steve
@gerrysoldguyreview
3 жыл бұрын
Glad to help steve! It's the versaplex sir😅 I don't need any copyright issues!!🤣🤣 oh and don't worry grubnut will become a thing!! Be well my friend
@SFDFLATH12
3 жыл бұрын
@@gerrysoldguyreview LOL I just had to - couldn't resist ;p I am so hoping "grubnut" takes off! Thanks again.
@gerrysoldguyreview
3 жыл бұрын
Oh it will for sure!🤣
@timcustomrc
3 жыл бұрын
Great explanation Gerry. Nice to see video with a clear simple explanation, not enough videos are this clear.
@gerrysoldguyreview
3 жыл бұрын
Thanks tim! It kept coming up in the comments so I figured I'd put a little something together!
@mattcann3436
5 ай бұрын
Phasing is the process of aligning the universal joint yokes on both ends of the drive shaft (or double u-joint)in a parallel fashion. If the joints are not properly phased, they will operate at varying speeds throughout each revolution which can cause second-order vibrations
@gerrysoldguyreview
5 ай бұрын
Thanks Matt 😁
@codykeller8977
12 сағат бұрын
Came here to say just this!!!
@AMAZINGRC
3 жыл бұрын
25 years in the industry and I have never heard of this..!! I now have to go through every single one of my crawlers.!! One in particular I think has this very issue wrong with it... Excellent video, well done. New subscriber.!!
@gerrysoldguyreview
3 жыл бұрын
Thanks so much! I did the same thing when I first heard about it! I also had one with the problem also! Thanks for the sub and let's make sure we chat more!!
@AMAZINGRC
3 жыл бұрын
@@gerrysoldguyreview for sure.!
@gerrysoldguyreview
3 жыл бұрын
No problem!
@ronhelman3985
3 жыл бұрын
Hey Gerry, great video!! It's nice to see things like that explained. Thank you!!!!
@gerrysoldguyreview
3 жыл бұрын
Thanks ron! It does seem to make a difference these days!
@Musky0503
3 жыл бұрын
Thanks Gerry for this proper way to build drive shafts
@gerrysoldguyreview
3 жыл бұрын
Thanks my friend!!
@Musky0503
3 жыл бұрын
@@gerrysoldguyreview you bet you keep shooting good videos I'll keep watching & commenting
@gerrysoldguyreview
3 жыл бұрын
I always look for you in the comments! And you never let me down😁
@WoodsUnknown
2 жыл бұрын
Thanks Gerry for the detailed info. Hope all is well and cant wait for the next video. What do you use for camera equipment?
@gerrysoldguyreview
2 жыл бұрын
Thanks Marc! All is well and I can't wait to make the next one. All I use is a s10 phone
@hellorc7678
3 жыл бұрын
Nice and simple explanation Gerry! Good info .
@gerrysoldguyreview
3 жыл бұрын
Thanks jason!
@poochwmc3063
3 жыл бұрын
Driveshaft phasing EXPLAINED!! (More)Very useful info....Kudos. Ah, "Grubnut" that was my old nickname in college....🎶memories, of the way I used to be.... 🎶 lol
@gerrysoldguyreview
3 жыл бұрын
Thanks pooch😁 now I will have to hear the story behind that nickname.....grubnut 🤣
@poochwmc3063
3 жыл бұрын
@@gerrysoldguyreview Ah, ya got me, not really my nickname....but I could make up something if you'd like?
@gerrysoldguyreview
3 жыл бұрын
😍🤣🤣🤣🤣🤣
@mpkhobbyRC
3 жыл бұрын
Thanks Gerry! Never knew this!
@gerrysoldguyreview
3 жыл бұрын
Hey marco! It does seem that some newer trucks are effected more the old trucks!!
@mpkhobbyRC
3 жыл бұрын
@@gerrysoldguyreview im thinking i should have a second look at my belly dragger now!! Thanks again man!
@gerrysoldguyreview
3 жыл бұрын
I also caught myself checking my other rigs that I've taken apart!
@JohnnyChimpo907
3 жыл бұрын
Thanks for this video. Proper useful knowledge
@gerrysoldguyreview
3 жыл бұрын
Just like to be helpful Christopher 😄
@ShaneHart-q8u
Ай бұрын
My problem isnt vibration or wobble. I am having issues with the whole truck lifting up when i make a sharp turn to the right.........
@gerrysoldguyreview
Ай бұрын
That is usually a suspension or shock issue, my redcat marksman did it till I put thicker shock oil in it not as bad but still has it a little
@stevestonrcguy5393
3 жыл бұрын
Learn something new every day!👍
@gerrysoldguyreview
3 жыл бұрын
Thanks buddy!! 😁
@bobaque70
3 жыл бұрын
Great tip or trick Gerry,have a great weekend!
@gerrysoldguyreview
3 жыл бұрын
Thanks my friend, you too😄
@Pezzapoo
3 жыл бұрын
great vid m8, learned something new )
@gerrysoldguyreview
3 жыл бұрын
Thanks bud! Now if I could learn to detail like you!!😁
@rcflashcars
3 жыл бұрын
cool job! big like! 👍👍👍
@gerrysoldguyreview
3 жыл бұрын
Thanks buddy!!
@3dman875
3 жыл бұрын
Great job on the video today Gerry
@gerrysoldguyreview
3 жыл бұрын
Thanks fred!
@JohnnyChimpo907
3 жыл бұрын
Still going out bashing today? I need to get my rigs out for some fun ^_^
@gerrysoldguyreview
3 жыл бұрын
Sorry man things got crazy last night ! Might try for this weekend or later this week, when do you get off work during the week?
@JohnnyChimpo907
3 жыл бұрын
@@gerrysoldguyreview I am free in the late afternoon / evenings. Find me on Facebook and let’s link up! I think I’m gonna take my recent build on its maiden voyage today
@rcplaytime
3 жыл бұрын
interesting vid bro😀👌👍
@gerrysoldguyreview
3 жыл бұрын
Thank you!
@soulthatcreates
7 ай бұрын
It's not the mass difference that causes vibrations
@gerrysoldguyreview
7 ай бұрын
Please explain?
@codykeller8977
12 сағат бұрын
@gerrysoldguyreview when out of phase the two ends of the driveshaft spin at different RPM's.
Пікірлер: 57