No problem, got a bunch more fuel system videos comin! 🤘😁
@605BOLT
Жыл бұрын
That hat is a nice piece.
@pemoramirez1037
Жыл бұрын
Been waiting on this video.
@DebtLife_Projects
Жыл бұрын
Bunch more incoming! Full fuel system turned out awesome 🤘
@tiburcioislas9567
Жыл бұрын
Nice I just had the same fuel system installed on my L
@DebtLife_Projects
Жыл бұрын
Nice! It's a nice unit, that's for sure.
@hdcircuitry
Жыл бұрын
Great vid....looking forward to part 2 with the wiring install! lol
@DebtLife_Projects
Жыл бұрын
Editing that as we speak lol 🤘😁
@BabyJake426
Жыл бұрын
I have a similar triple pump fuel system, from a different vendor, installed on my L. I did have an intermittent problem with my fuel quantity gauge reading zero. A local Ford dealership technician found that the triple pump and fuel quantity sensor had an interference fit. He fixed it and all is well. Just an FYI… Thank you for the great vids, DebtLife!!! 👍🏼😁
@MatthewMuhlenkamp-zi7ye
Жыл бұрын
Appreciate your all videos and content! Helped a lot on my white 03 restoration journey. I’ll be dropping my fuel tank today. Interested in evap delete process as well! You still planning on make a video to cover?
@albertooropeza2505
5 ай бұрын
Did you ever do a video on the gas tank venting
@DebtLife_Projects
5 ай бұрын
I didn't, I was advised not to, due to epa cracking down on that kinda stuff, not worth the risk. But it's easy, just run a hose off each vent on the tank, to a T fitting, then one hose up the filler neck to a breather filter. I also packed my breather filter with fish tank charcoal, to help with the fuel smell.
@Fastcarsticklemypickle
Жыл бұрын
Sweet! Fuel system stuff, that means it's getting close! Can't wait for this thing to fire up! 💪
@3500camarz
Жыл бұрын
Hopefully your fuel sending unit still sends an accurate reading to the fuel gauge. Also, is there a reason you used crimp connectors instead of soldering and heat shrink?
@JB-zn1kx
Жыл бұрын
No way you would have known... but I bought that setup and then never needed/used it. Would have given it to you just to see it used. :(
@DebtLife_Projects
Жыл бұрын
Dang, wish I knew that lol, this thing hurt the wallet lol 😂
@02Lightning
Жыл бұрын
I’ve got a question that you might be able to help me with, when I get on it in my 02 lightning at full throttle right about 100-105mph I notice it cuts out just a little bit but nothing to bad. It has a 6 lbs lower and K&N cold air intake with a hand held SCT tuner. The MAF sensor seams too look stock.
@DebtLife_Projects
Жыл бұрын
That can be a ton of things and impossible to know without more data/info. First thing I always do is start with the plugs. Pull, look at, and replace the plugs. I'd also be skeptical of a stock maf with that much pulley, needs a ba2600/retune, and also no boost cooling mods? If not, get some asap, these blowers create a lot of heat.
@02Lightning
Жыл бұрын
@@DebtLife_Projects okay thank you so much for the info! I’ll be sure and do that!
Пікірлер: 20