Not only is Ryan a great sound engineer & teacher, but man, he is also a great drummer who can lay down a FAT groove.
@Chris-sv8ty
Жыл бұрын
I can tell he likes Bonham
@SpectreSoundStudios
3 жыл бұрын
Very cool! Nice work!
@calebneff5777
4 жыл бұрын
That sounds amazing. Detailed like close mic, but naturally spacious and cohesive like Glyn Johns.
@ZacharyRedFulton
5 жыл бұрын
Judging by how this is set up, I think this may be the most versatile overhead configuration, in my humble opinion! I think, depending on what kind of music you’re mixing, you can leave all the mics in mono or pan the side mics in stereo, and even add close mics for further enhancement! I don’t know if I can quite pull off those tricks with the other overhead configurations. I’m a fan of it!
@giordash
8 жыл бұрын
One thing I've always found fascinating about this technique is that it kind of borrows from George Massenburg's OH method of dividing the kit along the kick/snare axis. The coolest thing about this is that there is actually mic representing that axis sonically. With the Massenburg stuff I've been privy to, he doesn't seem to employ a mic in this position - usually just two SDC overs on either side of the axis. If you'd really like to get crazy, I'd love to hear this OH technique in combination with a Moses Schneider "wurst" mic, or "fat" mic as others refer to it. Could be cool!
@creativesoundlab
8 жыл бұрын
That's really interesting. I've done a little bit of the fat/wurst mic a few years ago in a video "Recording drums with one mic" I think it was, and it was that technique.
@giordash
8 жыл бұрын
You did! Which is a great video btw. Did you do it in combination with the Weathervane OH's too though? Cause that's what has my curiosity peaked. I could be crazy, but I feel like the wurst + weathervane OH's could be a monumental coming together of techniques. Some interesting material for a new CSL vid perhaps?
@originalcaptainogre
6 жыл бұрын
We just tried this on one of our recordings. This is the BEST method we have ever seen! EVERY drum comes out- there's no need for any other mics in the toms, snare, or pretty much anywhere else. Who would have guessed? And why didn't we see this a year ago?Trust me when I say, "DO IT THIS WAY." You won't be sorry, at all.
@creativesoundlab
6 жыл бұрын
Thanks man! Some very high words there. I personally still use my favorite for overheads, the AEA R88, but this technique gave me the Weathervane sound. There was something to the wide image, but centered low mid overhead spread. I said, "Wow that's the sound".
@jas_bataille
4 жыл бұрын
This is SO invaluable for me! I'm a drummer on a budget who have to work remotely, and while I also did soundboard duty on many shows, I'm not a studio engineer by any mean. This is going to help me upgrade from my current Roland set-up and save quite a lot of time to make everything sounds right! And almost zero phase issues! Brilliant :D
@lukesuperflyjones
8 жыл бұрын
This was extremely helpful to watch and follow along too! Thank you for all the time and effort you put into making this video! Sounds fantastic and I can't wait to try it out!!
@creativesoundlab
8 жыл бұрын
+lukesuperflyjones Thanks!
@juliofigueiredo7052
8 жыл бұрын
Dude! What a great technique! I will be using it next week recording drums for a ska orchestra! It is going to take advantage of a great sounding room and the drums are gonna sing! Thanks a loooooooot!
@creativesoundlab
8 жыл бұрын
Sure thing!
@serfcrook1403
8 жыл бұрын
Love the channel, actually I think it's turning into more of an obsession, so much immediately applicable information. Thank you!
@creativesoundlab
8 жыл бұрын
+Serf Crook Dude, made my day!
@SoundsToBlowYourMind
4 жыл бұрын
Sounds great, very much Bonham sorta sound once you added in the room mics!
@SergioFilho
7 жыл бұрын
I've seen a lot of people complaining about how difficult is to position the 3 mics in a equidistant triangle AND measure them with the kick and snare.
@JesseBroman
7 жыл бұрын
This technique has a really smooth sound to it. None of the elements of the kit sound muddy or washy but I did notice the floor tom sounding quiet and/or thin. The hi-hat was maybe a bit quiet as well but had a nice character sort of sound to it.
@creativesoundlab
7 жыл бұрын
Yeah, this technique really does sound like the Weathervane crew did it. It's really amazing how it doesn't sound like I recorded this.
@angeloboltinimusic
8 жыл бұрын
Have you tried the same technique without letting the thread slip? I think the reason it works, is because in three mics you don't need absolute perfect phase, but the pencils add more width if they're just a little bit out, which they are now. It won't collapse in mono, because the ribbon is still there.
@creativesoundlab
8 жыл бұрын
+Angelo Boltini Yeah, that's one of the biggest questions on why this works. I wanted to hear for myself on how well this actually works.
@Bdmctear
8 жыл бұрын
+Angelo Boltini - One of the last innovations before we published this was the equilateral triangle, which I haven't been able to make work when treating the sdc's like Recordermans. Our original inspiration was my own misunderstood version of Recorderman that I wanted to insert a middle element into. Later, I realized that the key was to start with the placement of that center element and recreate geometricly something relatively like Recorderman, but not exactly. I ultimately like ours much more than Recorderman. Much bigger and more natural.
@azizberk
6 жыл бұрын
Great video, thanks so much for the effort! Could you clearify where the pencil condensers are pointing at? Thanks 👍🍻
@themancable
6 жыл бұрын
Such a great demo of this technique ... I have yet to try this but must reserve a session to try this soon!
@jcabanaw
6 жыл бұрын
I've watched this video 2000, of the 32, 745 views. I've enjoyed it every time. Thank you as always. I'm gonna probably use this on a session this weekend with some great mics and pres in a nice big room and a great band. I hope the drummer can tune his kit as well as you always do. Have you used this technique since filming? Have you picked up any new tricks and nuances?
@creativesoundlab
6 жыл бұрын
I really haven't. My go-to technique is the Blumlein which is just a simple XY with a pair of ribbons. I use the AEA R88 for that because it's just so easy to nail every time and sounds great. This sounds great too, but I've been using my SDCs on toms so that put this technique out of the running.
@jcabanaw
6 жыл бұрын
Good to know! I actually settled on Blumlein config with some Royer R10s (and Cloud Lifter CL- Z) for OH and KM185s on Toms, N22 on Kick Out, D112 kick in, 57 SnTop, BeyerDynamic M260 SnBtm, and a Flea 47 for mono squash.
@jcabanaw
6 жыл бұрын
I think R88 might be my next mic purchase after a 441
@petervoigtmann
8 жыл бұрын
I just tried it and it sounds really great! No phasing problems at all!
@creativesoundlab
8 жыл бұрын
+Peter Voigtmann Nice! I'm really glad you tried it.
@taopagan
4 жыл бұрын
Great video! Really got me thinking, thank you. Also (along those lines), I had not thought about how using in-line pads might be cutting the voltage to the phantom power, too. Super interesting!
@snippletrap
6 жыл бұрын
Good drumming, great kit, sweet room, natural but fat mic setup. A+
@richardputnam2303
4 жыл бұрын
Great video! Thanks for putting it together! Can't wait to try it out!
@lelandbobpalmer
5 жыл бұрын
Hi Ryan, Since you've posted this video I've only seen you have been using other methods of overhead recordings for the following videos. What is the reason for not sticking with this technique and why do you use the overhead technique you most often use. Is the the Weathervane Method too time consuming?
@kosycat1
7 жыл бұрын
Just got a pair of WA-412's and 414's for my studio,running into an m-32
@AndrewChapmanMusic
5 жыл бұрын
I absolutely love the sound of your kit!
@FVDaudio
8 жыл бұрын
A nice quiet room very helpful with cheap microphones... But with this example mics the quality is better. Really nice and well done technique.
@creativesoundlab
8 жыл бұрын
+Francisco Viper Díaz Thank you!
@itsdaviaquino
8 жыл бұрын
Nice technique!!!! Sweet Rode ribbon mic!!! Just be careful kids, most ribbons mics don't need phantom power and it might actually damage it.
@creativesoundlab
8 жыл бұрын
+Davi Aquino Yes agreed. I'm always triple checking my phantom power when ribbons are connected.
@allengoyne
Жыл бұрын
I don't have a ribbon but I do have an AKG C414BULS that I can put in figure 8 that I thought I would try on this for the LD overhead and just use the dynamic Samson kick mic I have on hand.
@purpurastudios3394
8 жыл бұрын
Very nice technique for a grate sound. Thanks for sharing your knowledges.
@creativesoundlab
8 жыл бұрын
+PurpuraStudios Thanks.
@sham8723
4 жыл бұрын
Awesome. *request time.....* Now do one with 2 ribbons and one condenser! (please)
@MikleShnikle
8 жыл бұрын
Just want to throw in that your groove is on point man!
@creativesoundlab
8 жыл бұрын
+MikleShnikle Glad I choose to go with Rock Beat #28. Was going to do #23
@MikleShnikle
8 жыл бұрын
+creativesoundlab hahaha
@thebeatshedcouk
5 жыл бұрын
This is great stuff thanks Ryan! Trying this tomorrow, will let you know how I get on...
@JesseBroman
7 жыл бұрын
Those mic pres sound really cool.
@creativesoundlab
7 жыл бұрын
Thanks!
@Newmindcenterscom
8 жыл бұрын
Great series, CSL!
@creativesoundlab
8 жыл бұрын
+Newmindcenters.com Thanks!
@SimonChampagne
8 жыл бұрын
Really cool and well put together!
@creativesoundlab
8 жыл бұрын
Thanks Simon!
@cchriss_official
8 жыл бұрын
That is pretty awesome dude. Sounds good. Nice shuffle too. Would love to hear a processed version of all the tracks too
@creativesoundlab
8 жыл бұрын
+bikesdrumsnstrings Thanks man, all these grooves are pretty generic type stuff just to give us something to test the mics.
@Bdmctear
8 жыл бұрын
+bikesdrumsnstrings - if you want to hear a bunch of songs taken all the way to final mix with our technique, go to weathervane music's shaking through site. At the very least, the most recent 10 episodes or so use this method. (If you are a member, you can also download the mixstems to hear the tracks exactly as they ended up in our mixes, in isolation.)
@creativesoundlab
8 жыл бұрын
+bikesdrumsnstrings Here's the link that Brian mentioned to hear this technique in action: weathervanemusic.org/shakingthrough
@cchriss_official
8 жыл бұрын
thanks guys
@JimmersThomas
8 жыл бұрын
Definitely want to try this - really interesting idea
@creativesoundlab
8 жыл бұрын
+JimmersThomas Yeah, it blew my mind when I first pulled up the faders.
@underpressureman
6 жыл бұрын
does it have to be a ribbon overhead, or could you use something else in place of the ribbon? Im guessing the ribbon was just part of the original sound of the technique?
@isogash
6 жыл бұрын
Look up the NTR's frequency response, it's extended but it's pretty dark, rolling off as much as 10db by 10khz. I have a feeling you could get the same effect with a large-diaphragm condenser (for the extended low end) and a really soft shelving EQ (6db/oct) to make it darker. You might also find that the condenser gives you a better sound without EQ. You won't get the same pickup pattern though.
@ofdrumsandchords
6 жыл бұрын
Problem with ribbon mikes is they can't be used with phantom power on. Your mixer must have 48v commutable on each input.
@nickfishermusic
4 жыл бұрын
I'm confused. You said the ribbon would create the centre image, and the 2 Rode's the side, but then set up a Rode directly over the snare in a classic mono position? So that's not particularly a side? That's an extra centre? I feel like the if the 3 mics were grouped into a stereo channel it would be right side heavy no? Sounds great mind. Aaaaand my brain has overheated.......
@terrydoyle
3 жыл бұрын
Very interesting indeed! Will give it a go …
@pezmoz2835
8 жыл бұрын
Great video Ryan. Love the sound, and well ... the simplicity of it. Get the distances/setup right and the drums will mix themselves. What is that kick drum? Looks similar to the one I had in my very first drum set I ever owned about 45 years ago.
@creativesoundlab
8 жыл бұрын
+Perry Moyses Those drums are 3 ply Slingerland, which from what I understand is early to mid 70's.
@vurbddum
5 жыл бұрын
I like the idea of this, any ideas how it might work with two dynamic mics and a small condenser on the axis? With the bass also mic'd maybe.
@gordontubbs
8 жыл бұрын
Dope video. What I got out of this technique is that any number, combination, or placement of microphones can be utilized if you maintain equidistance - and in theory you can emphasize any section of the kit you want. If I began using this technique frequently, I would be tempted to build a fixed array for quicker setup.
@creativesoundlab
8 жыл бұрын
+Gordon Tubbs Yeah, the sound of the technique is to have the ribbon in the middle that supports the fullness of the snare and toms. I still think that it's worth trying out with whatever mics you have available.
@Bdmctear
8 жыл бұрын
+Gordon Tubbs - We generally start the mic placement based on the physical reach of the drummer. So if they are tall and have a wide swing, I start with the first mic place in a safe range from getting hit. Then all dimensions follow from there. I've considered a fixed array, but because it's depended on whose playing on a particular day, the mics have never been in the same place two days in a row.
@TheSafetysheep
8 жыл бұрын
+Brian McTear you're a great producer Brian! I've been watching the weathervane videos the past couple of days. They are fantastic! This approach to drum overheads sounds perfect for what I do as well! I'm gonna purchase the bundle today and try the room mics and mix techniques.. Much respect and I'm happy to support people like you guys at weathervane. Thanx you for the time spent on this video creativesoundlab
@Gretsch0997
7 жыл бұрын
Hi Ryan, I just did a session using this the W-Vane technique. Thanks for sharing this! I used a Royer R-101 for the Ribbon ( into an ART MPA II). Two e614 Sennheiser Supper-cardiods for L&R ( into Golden Age PreQ-73's) Atop a set of Gretsch Renown's. What an articulate sound!!......and a very nice change Thanks a gain
@philkimber8086
7 жыл бұрын
Great sounding drums and great video ..... Would the 3 mic/triangle technique work on a bigger kit with 3 rack toms and 2 floor toms ?
@creativesoundlab
7 жыл бұрын
You could certainly try it. I think find a center of all the toms is key for this particular technique. So perhaps the center line would go between toms 2 and 3, instead of down over the kick. Just a guess as Brian always records with two toms.
@giovannifranzetti6214
4 жыл бұрын
Very cool actually!
@anthonygibney4003
8 жыл бұрын
Brilliant video. Keep up the great work!
@creativesoundlab
8 жыл бұрын
+Anthony Gibney Thanks!
@nicholasnevins9941
4 жыл бұрын
I couldn't find the Weathervane PDF. Whats the measurement of the room mics?
@AhrenField
4 жыл бұрын
This sounds huge Ryan! Could you tell me about your kick drum and high hats in this video? Those are sounds I'm looking to improve and I'm loving the tones in this video. Thanks!
@dlsdrums
8 жыл бұрын
thanks man , looking forward to setting it up today,
@creativesoundlab
8 жыл бұрын
Nice, let me know how it goes!
@shelbypreklas3740
8 жыл бұрын
Love this technique!
@creativesoundlab
8 жыл бұрын
+Shelby Preklas Thanks! Brian and his crew taught me! The triangle idea blew my mind!
@keeelane
8 жыл бұрын
sounds awesome, dude
@DontWorryImAPilot
8 жыл бұрын
I've been using a similar technique on overheads for a while now. Give it a shot some time if you're experimenting some day! Start with a spaced pair of condensers (I've gone back and forth between small diaphragm and large diaphragm) equidistant from the snare oriented on either side of the kick/snare center line. Add in a ribbon mic in the middle near that center line also equidistant from the snare. Basically, making a similar triangle to the one you've made - mine is far from equilateral, though. I end up high-passing the spaced pair fairly high (nothing too outrageous - 6db per octave at 400hz-ish is where I'll start) to concentrate the low end into the center and I'll let the ribbon roll off the top in the middle mic to put the high frequencies out far right and left exaggerating the sense of width a bit. Buss the three mics together and then do a little EQ work to make sure the mids aren't too thick. The sounds have been good enough to be my main drum sounds lately. The spot mics are just reinforcing at this point...and I like it a lot more than my previous methods! Thanks for all the info, Ryan!
@creativesoundlab
8 жыл бұрын
+DontWorryImAPilot Hmm, your description could be within an inch of what this technique does. Depending on where the mics are placed, and how the kit is set up (height of toms, size of drummers kit) this technique might have a tendancy to change as there are measurments to both toms. A lower floor tom for example may push the ribbon mic a little back vs directly over the ride for example. Also, this technique is not perfectly equidistant, but the measurement to kick and snare are always the same SUM of both distances. Your technique is most likely very close in sound, but this gives multiple points of measurement which is nice.
@johnroesch689
4 жыл бұрын
Thank you
@gabrieleangelobenanti9239
7 жыл бұрын
Hi, happy to meet you Ryan. I found interesting your videos and the logic behind them ( or with them...). For now I only have a question: where can I find the song that open and close your videos? I need to listen to that song, sound very interesting and have a good vibe. Can you help me? Thanks.
@ebbulk
8 жыл бұрын
Great video and interesting technique! Would love to hear a comparison between this and recorderman. In theory your mic's aren't in fase with this method, but hey, in the room your ears aren't in fase aswell.
@creativesoundlab
8 жыл бұрын
+ebbulk Yes, your absolutely right. They are not in phase, which made me think this technique was crazy. The Weathervane folks don't know why it works for them on a consistent basis, but they say they've gotten a lot of miles out of it.
@ebbulk
8 жыл бұрын
+creativesoundlab I hope to try it someday soon. Unfortunately, being a home recorder, I don't track drums often and have only 8 inputs available when I do, so prefer to stick to a 2 oh's and the rest close mic'ed approach. When I'm searching for a more vintage feel I'll be able to experiment more with oh's and roommics and will defenately try this method!
@creativesoundlab
8 жыл бұрын
+ebbulk Hey no problem. I have my favorite techniques I use too. This one is in my top 2 or 3 now.
@Bdmctear
8 жыл бұрын
+ebbulk - Recorderman sounds small in comparison, from my experience. I've done simultaneous comparisons and find that the stereo image of recorderman seems tenuous, and the size of the snare and toms can't hold up without that big ribbon mic that we've placed up the middle.
@creativesoundlab
8 жыл бұрын
+Brian McTear Yes, the drums sound huge in these tests. I'm really impressed with how big the drums sound because of that ribbon.
@alvagoldbook2
6 жыл бұрын
I think this method beats the recorderman or gyn johns method hands down. It has a great open sound. I've wanted to find a way to capture the drum sound on the early Sabbath records, and this might be the way to do it.
@mka917
2 жыл бұрын
I cant find the Weathervane pdf on this technique, any suggestions ?
@markszymanski1177
6 жыл бұрын
Great vid, just coming back to it now. I have to try this... On an aside, do you have a video about piecing together your kit and decisions made? Would be cool to see...
@greagandev
8 жыл бұрын
Awesome! It sounds great.
@creativesoundlab
8 жыл бұрын
+George Reagan Thanks!
@allmetaliswelcome
8 жыл бұрын
Is this related to the McTear method you mentioned in your first overheads video?
@creativesoundlab
8 жыл бұрын
+Luuk Meijwaard Yep! This is the method that I mentioned
@andrewarbogast1
6 жыл бұрын
What about room mic placement with this? Thanks
@creativesoundlab
6 жыл бұрын
Brian and his crew like to use a pair of ribbons that are on the ride cymbal side of the room. The ribbons face each other and are about 3 feet off the ground, and 1 foot apart. They are constantly changing and modifying their techniques though.
@Eurodrummer666
4 жыл бұрын
Hey Ryan! I am just watching again this nice video, and i´m wondering how to apply this method to a drumkit with more than 2 toms...
@creativesoundlab
4 жыл бұрын
Yeah, I don't think that even Brian knows that. I think they just go for two toms always. But just try it and keep messing with it. If you figure it out, you would be the first in the world and cutting edge.
@markpeters2317
4 жыл бұрын
I would imagine you just add one more tom to your phase measurements. The exact placement would probably look the same, but maybe a bit further apart? it's a good question, and since I haven't tried this OH technique before, I'm just as curious as you. I would suggest you just follow the same steps (with your extra tom), and if you run into problems, just think strategically and use your ears. Secondly, the more important question is: Do you NEED three toms in the recording? I haven't used my third tom in years. It distracts me from keeping things simple, and changes where i can set up my ride cymbal. I don't think I'd set up a drumkit with three toms unless it were absolutely necessary for the song. from one drummer to another, I know more toms is more fun, but it's all about serving the song, baby!
@gandre1982
5 жыл бұрын
Yess, very nice sounding, nur where the pencils are facing at? Greets.
@Martin-kn6vc
7 жыл бұрын
I tried to do this today when I had some spare time. I just couldn't get it to work right. I couldn't get the ribbon to be equidistant from the rack tom and floor tom and couldn't get the side microphones to be perfectly equal to form the triangle. I suppose having the mid tom in the way doesn't help. When I did some test recordings, I found that flipping the polarity of the side microphones made things sound worse (which is good I guess, as it means I kinda got those right), but when flipping the polarity of the ribbon, it actually made things sound a bit fuller. It took me a good hour to even get it to that stage, but I'll have to try again to get it right.
@creativesoundlab
7 жыл бұрын
Yeah it takes a little time to set up. The first time I set it up, it took about 20 minutes with going back and referencing the instructions. It gets faster in the future.
@Martin-kn6vc
7 жыл бұрын
Creative Sound Lab I tried it again today and it worked a charm! I used my Cascade Fathead II with my Shure KSM137s. Added a D112 on kick and also tried a 57 on snare. It was actually pretty interesting flipping the polarity on the 57, as it actually made the snare disappear, it was insane. That never happens.
@ehav
6 жыл бұрын
Are you still using this technique? It sounds pretty good. I bet you can get away with panning wider if you use large diaphragm condensers and a ribbon.
@creativesoundlab
6 жыл бұрын
Well I don't use this technique a lot, because I mostly use my R88 for overheads.
@xlionheart777x
8 жыл бұрын
Awesome technique, but this is not a common decca tree?, i mean, an angle of 180 degrees in a equilateral triangle over the drummer`s head, i thought that this drum technique was common to record bands of the 60's, i belive that i had seen this technique in a picture before. Im confusse :/.... the mic in the kick it`s a part of the original arrangement???
@creativesoundlab
8 жыл бұрын
+Andres Uribe Gelvez Yeah, t here some similarities to the decca tree, but that's a whole different thing. This is not my own technique, but Brians, and I found it very interesting sounding compared to other techniques. The kick mic is something that I added. Usually Brian will use a mic inside from what I've seen.
@xlionheart777x
8 жыл бұрын
I found the place where i saw this method!!!, is not the same but is very similar!!! :D in this article is called 180 deegres: www.drummagazine.com/plugged-in/post/minimalist-drum-miking-techniques/
@creativesoundlab
8 жыл бұрын
+Andres Uribe Gelvez Yeah I see what you mean. It does seem like the 180 approach. I know that Brian arrived at this approach by mistakenly sliding his finger on the string when setting up a recorderman, and then another engineer at Weathervane suggested the triangle idea.
@alexanderfitzgerald2435
8 жыл бұрын
Thank you. Very interesting.
@creativesoundlab
8 жыл бұрын
+Molten Monster Thanks!
@jorgepeterbarton
8 жыл бұрын
How would measuring ensure balance of the toms? What if they are different volumes, since one is about ten time the size (volume). And, when measuring the bass and snare, usually its for phase and you pinch the string so it remains the same distance... So i don't quite understand all this measuring and why its so important when its got nothing to do with phasing!...I mean it sounds good, but just seems a bit arbitrary..............If anything you've ensure that the kick and snare will NEVER be in phase by doing this as you've definitely shited the ratio between them- even if you time-align tracks later... Unless there's some magic in the triangle I am missing...Like they are meant to be equally out-of-phase to create something like a mid/side array effect. A side question though; I often prefer the OHs infront of the kit- and use the string pinch method....if I do that though I can't get a string to the kick beater. Where is good to measure from? The top of the head? The top of the middle of the shell?
@jorgepeterbarton
8 жыл бұрын
+jorgepeterbarton OK you kinda answered in the Q&A video. And are just as confused as I. Seems like there could be some maths involved though, like they are equally out of phase in opposite directions becuase of the triangle.
@paolodigiovanni9839
5 жыл бұрын
What's the name of the ending song?? :O
@throwbacks
4 жыл бұрын
Because all drummers use two toms and two cymbals.....NOT. Also, is it a requirement that there be a ribbon mic over the ride cymbal? How about another small condenser?
@mariomario9984
8 жыл бұрын
hey there! awesome video, you've got a new subscriber for sure. a few questions: 1 - what other mics would you recommend beside the kick drum (bottom snare, room mics, et cetera) 2 - do you have a tutorial on how to mix the audio from this technique? if not, is there a source you could point me in the direction of? 3 - what genres/playing styles (besides say, with a jazz drummer) would you recommend this for? thanks again for the great content.
@creativesoundlab
8 жыл бұрын
This technique can used with about any style of music I guess. I know the Weathervane crew do a lot of rock. I think it matters more about drum selection, and cymbal selection for styles of music.
@underpressureman
6 жыл бұрын
Also, I have a cool idea for a video! could you do a shootout between some coles ribbon mics and the rode ntr ribbons? Obviously you would need to get your hands on some coles but just a thought! theres really nothing Ive found on the subject!
@alexh7336
4 жыл бұрын
does it HAVE to be SDCs?
@outze
8 жыл бұрын
Hey Ryan, that sounded amazing! Would love to hear a version with close mics as well. Could this technique be used with other microphones than ribbons; like large diaphragm microphones? I'd still wish I had some ribbons to check this technique out myself though =) Do you normally only pan your drum overheads 40% or do you experiment with the panning ?
@creativesoundlab
8 жыл бұрын
+Søren Sørensen For your question about using a different mic than a ribbon on the center - Sure I guess you could try it. Part of the sound of the technique is having the low mids down the middle, and the brighter mics (SDC) out to the sides. 40% is just what Brian McTear told me that he uses, and I was trying to stay true to the practices that his engineers use. I dig it actually.
@Bdmctear
8 жыл бұрын
+Søren Sørensen -- If I were using XY or some other true stereo technique, I'd typically pan hard. But our technique falls apart when panned too wide, just like Recorderman has in my experience. It actually doesn't mean our technique produces narrow imaging. It's quite the opposite. It simply does so without panning the mic signals all the way.
@outze
8 жыл бұрын
Thanks for the responses! Thinking about it I can clearly see your point. Now I just have to try this for myself! Merry Christmas =)
@aleksiejkutia3659
8 жыл бұрын
thank You!
@jebmcgovern3744
8 жыл бұрын
Do you think using pads on mics is the same as inline pads in regards to reducing phatom power? Good video. I bought these instructions but had a hard time with them because of the up and down distance of the second pencil mic then realigning the triangle between the three
@creativesoundlab
8 жыл бұрын
+Jeb McGovern Yeah I think that a pad that is build into the mic, here I used the pad on the NT55, it is designed to reduce it's output without it having an effect on it's performance. So I would use the pad on a mic first, if I don't have then, then a pad on the preamp, and then if I have neither of those an in line pad like I had mentioned.
@Bdmctear
8 жыл бұрын
+Jeb McGovern - yes, when we've aimed for a wider triangle, I've found I have to repeat many of the later steps back and forth in order to get it to fall into place. Once the dimensions have settled into place though it sounds great and works like it would with a smaller triangle. I'd love to some verification from someone else, so please let me know what you think. You can email me your thoughts any time.
@slightlydrowsy6580
8 жыл бұрын
Wow really cool technique, would love try this. What were some advantages that noticed over a traditional overhead mic techniques? Also since the mics are in mono how did you go about panning the three mics?
@creativesoundlab
8 жыл бұрын
+Slightly Drowsy The demo in mono was just to show how the mics are interactive and their phase coherancy. For mixing, put the ribbon down the center, and the two SDCs out to the side by about 40 %.
@muzicman2007
6 жыл бұрын
very helpful video thank you. I do have 1 question. will this same set up work on a 3 tom set up?
@victorcarrillo8500
8 жыл бұрын
Question, can you use a large diaphragm condenser instead of a ribbon? How would that sound? Great stuff!!
@creativesoundlab
8 жыл бұрын
+Victor Carrillo Yes, see Brian's comments below.
@musahenderson
8 жыл бұрын
Thanks for this I have never heard of this I don't get to mic drums up as much as I'd like but will hopefully get a kick soon. I will get the guide and this might be answered in this but are ribbon Mics necessary? Thanks for the great channel.
@creativesoundlab
8 жыл бұрын
+Musa Henderson To do this technique in same way, yes, because it gets the beefy lows and mid range of the kit and it acts as the center while the SDC act as the side in a mix. But I would try it with any mics you have on hand and see how it works.
@gabegreenberg6730
8 жыл бұрын
+Musa Henderson Hey Musa -- I work for weathervane and tried this technique once with two SM57s as the L and R OHs and a budget medium diaphragm condenser as the center OH. Definitely didn't sound AS powerful as with nicer mics and a ribbon in the middle BUT it actually resulted in a really accurate, even, representation of the kit and was definitely the best i'd ever captured drums in that kind of situation.
@creativesoundlab
8 жыл бұрын
+Gabe Greenberg Hey Gabe thanks for being apart of this and sharing your first hand experience with this. I've always wondered what that combo would sound like. Really interesting to hear it was a great result using 57s.
@daspotz5134
8 жыл бұрын
Nice technique, I actually used this on the first drum Demos I ever recorded... although I didn't really know what I was doing and didn't check the distances all that well. Will come back to this video next time I try it. Could you explain what you mean with the pad an the 48V not getting to the mic? I didn't really understand what you meant
@creativesoundlab
8 жыл бұрын
+Da Spotz Yeah, for the pad blocking part of the 48v....phantom power goes down the same wires that the signal travels on. So to pad one, you also pad the other. If you use a built in pad on the mic or the pre amp, then you keep the full 48 v going to the mic. This is a pretty new idea to me, and I just decided to stop padding for condensers, so I still have some testing to do and listening to do.
@daspotz5134
8 жыл бұрын
That's interesting! Thanks for elaborating. But just to be clear, you only pad when the signal exceeds what the mics can handle (volume wise), right?
@creativesoundlab
8 жыл бұрын
Well actually what the PRE can handle. I think a lot of mics can handle a lot, and most of the time it's the preamp that's overdriving. Rode has amazing headroom in their mics for example, so it's more about the pres. If it were about the mics being overloaded, then I would move the mic away from the source or use a different mic.
@afterthemovrning6643
3 жыл бұрын
My only concern is the way you pronounce equilateral
@andrewarbogast1
8 жыл бұрын
Thanks for the video. So for the overheads, is your right overhead pointing towards the snare? And what about the left overhead? It looks like it's pointing down between the snare, tom and crash.
@creativesoundlab
8 жыл бұрын
Yeah, I point everything everything in the general direction of the snare, but don't get too nit picking about it. The over-snare mic is pointed at the front edge of the snare, and back rim of the hi tom. The over-floortom mic is kind of pointed at my right knee. I know that the weathervane crew point the mics inward just slightly, but I'm not sure that you absolutely need to. If anything it might be more technically correct to point them the same angle.
@andrewarbogast1
8 жыл бұрын
creativesoundlab Thanks. I haven't tried out the technique yet but look forward to it. I was watching the video from George Massenburg on how he mics overheads and was wondering if there would be a way to combine the two. They're already pretty similar but I don't think the Massenburg technique has the snare OH directly over the snare.
@tvgrey
7 жыл бұрын
Sounds good! The ribbon points at the snare *and away since it's polar; is room reflection ever a problem? Where's the ribbon panned; center? And the two condensers create the stereo image? Or since it's a triangle they all work together? Tricky one! Thanks
@creativesoundlab
7 жыл бұрын
Yes, the ribbon is panned center, and the condensers are panned out to the sides. Brian has told me that sometimes in mixing the middle ribbon is not that strong in the mix, and they can sometimes rely heavily on those side condensers for most of the drum overhead sound.
@bloodlord1989
8 жыл бұрын
Silly idea,but what if used on lead vocal? But tighter range. I have three mics,but two XLR cables so i can't really try it. I dread plain mono vocals lol, I'm a big stereo fan due to producing and mixing on head phones. Mono compatibility is important,but a little stereo can't hurt to make it sound a little bigger.
@creativesoundlab
8 жыл бұрын
+blood lord (Chaotic Sonics) For vocals, I would recommend other techniques besides this one. I've set up room mics on vocals just so I have a real verb sound available. I would recommend something like this which gives you mono compatability on vocals, yet the stereo-ization you talk about using two mics: kzitem.info/news/bejne/pax8rp2cmpd3hoI
@bloodlord1989
8 жыл бұрын
creativesoundlab Oh yea I saw that one gave it a like. Thought that was a cool technique. My room is very dry though for that, have stuff everywhere damping the room. I have to figure out how to undamp the room even after cleaning up since it's still kind of damped from the curtains and closets.
@Bdmctear
8 жыл бұрын
+blood lord (Chaotic Sonics) - I've generally found that stereo imaging on a vocal is not a good thing. Any shifting, even a periodic movement of the head toward one side dramatically shifts the position of the voice. Very distracting and tough to mix. (I learned this the few times I tried using mid-side on vocal). It's led me to realize that full utilization of the stereo field actually DEPENDS on some elements occupying the center, and I'm comfortable with the vocal being one of those things. (Reverbs and ambience on vocals can certainly occupy the sides, though.)
@foketesz
8 жыл бұрын
superb
@creativesoundlab
8 жыл бұрын
+Nicolas Guerrieri Thank you!
@chrisark4458
8 жыл бұрын
I dont have a ribbon mic but I do have a matched pair of Rode M5's and a TLM 103.... Worth a shot? Thanks for the videos
@creativesoundlab
8 жыл бұрын
+Chris Ark Yes try it! I'd love to hear it! Part of the sound is having a dark mic in the center that picks up the toms and snare, but I think you should still give it a shot.
@jazzsax8Vlad
8 жыл бұрын
great idea! thanx. but only 2 questions. 1 - what if I have 2 rack toms and 1 floor tom? I mean distance between mics. 2 - what distance from drum set to room mics? wanna try today this method
@creativesoundlab
8 жыл бұрын
+Vladimir Sergeev Hmm, I might let Brian answer the question about the second rack tom. The second rack tom might be a touch louder than the hi and low tom, but it'll still be in the middle of the toms. That's a great question that I'm curious to know too. For the room mics, the mics in the video are about 6 feet away from the front edge of the drum kit.
@jazzsax8Vlad
8 жыл бұрын
+creativesoundlab thanx for your feedback. I appreciate it. I made test record by this method and found that the studio should be acoustical prepared (sorry for my english). I mean damped. otherwise there is too much room in mix
@Bdmctear
8 жыл бұрын
+Vladimir Sergeev - yep. The technique has not been fully fleshed out for other configurations. I intend to as time goes by. Would love it if you would help...
@Bdmctear
8 жыл бұрын
+Vladimir Sergeev -- as far as the distance, it's explained in the document itself, but I start with a distance that the drummer won't hit the mic with drum sticks.
@jamessandwell3769
8 жыл бұрын
Hello, great work man. Could you please tell me about your snare/head/tuning.. you've alluded to using ambassadors for batter heads but your snares always sound so dry (in a good way) when hitting rimshots. Mine always sounds ringy whether tuned high or low. Thanks, James.
@creativesoundlab
8 жыл бұрын
Yeah, I use the snare side heads, which are the real thin ones as you pry know. The bottom head is tighter than the top by about a 5'th or more. The dryness of the drum can be due to the quality of the drum and baring edge. Supraphonics for example sound warm and kinda dryer than some wood drums. I believe this is because the edge is fairly rounded off, compared to a really sharp edge.
@Lennyrapid
8 жыл бұрын
great tutorial I'm a drummer and audio engineer so I am extra curios about that ride. the Zildjan K, What's the size and or additional model name of it =) Looking to get that great crashable ride sound you've got here. thanx. Cheers from sweden/ Lennny
@creativesoundlab
8 жыл бұрын
+Lennyrapid Hey thanks man! It's a K Custom Dark Ride 51cm (20 inch).
@bloozerd
8 жыл бұрын
Ryan...I'm so luvin' all your presentations...this one so much that I had to go out and replace my cheapy stereo Blumlein with the R88...Question: I have a medium sized room...about 12' long X 11.5' wide X 9'3" tall...I have home made panels just like yours except I use 8lb rockwool...!...They are not splayed out from the wall...(I'll give that a go)...how do I best determine what frequencies need attenuation...? Also, I thing the audience would like to know what your signal chain is...? Thanks...
@creativesoundlab
8 жыл бұрын
+Dave Smith Hey thanks Dave! Yeah, just put the panels up and try to get a little space behind them. I try to have a spot in the room where each wall and ceiling is at least treated. The ideal place to catch the bad frequencies is 25% of the way out from the wall, but that is not often practical.
@bloozerd
8 жыл бұрын
+creativesoundlab Yeah...that would be just under 34" out from the wall...If I don't have to treat both walls...it could work...but the room is only 11.5' wide...!...Thanks for getting back Ryan...!
@creativesoundlab
8 жыл бұрын
+Dave Smith Haha, yeah, that's a crazy amount of room that you loose. I would stick with 6 or 8 inches and I think you will hear a difference.
@bloozerd
8 жыл бұрын
+creativesoundlab Thanks Ryan...!
@nickkapp1736
7 жыл бұрын
This may not be the most appropriate place to ask this question, but do you have any experience or tips for overhead miking a kit with 2 kick drums? Thank you!
@creativesoundlab
7 жыл бұрын
Gosh I can't say that I have ever done a two kick drum kit. Really rare. An engineer I look up to has said that it's been years sense he's seen more than two toms in his studio.
@onreel6327
5 жыл бұрын
Is it possible to get a ribbon mic without breaking the banks? I'm still wondering that
@joejeffery8581
4 жыл бұрын
yes. I have a Nady RSM4 that sounds good to me.
@jcabanaw
8 жыл бұрын
I love your videos. They're making me think in different ways. Most excellent. Do you do patreon? I'd love to support your time! I intend on using this method at my next session but I am short a ribbon.. have you tried this with a condenser set to fig 8? Thoughts?
@creativesoundlab
8 жыл бұрын
+Jason Lyle Thanks Jason. Yeah, my Patreon is at www.patreon.com/creativesoundlab
@creativesoundlab
8 жыл бұрын
+Jason Lyle For the ribbon in the middle, I would pry keep it as a ribbon. At least use something dark if you can. A 414 in subcardiod or even omni might work just fine. You want it to pick up the body of the snare and capture a lot of fullness.
@jcabanaw
8 жыл бұрын
Well I had a full weekend of Drum sessions. I borrowed a ribbon. Weathervane was really cool! Didnt work for all tracks, but man did it work on the ones it did! Thanks for the full tutorial!
@nickraffaele3471
8 жыл бұрын
What hi-hats are those? They sound super nice.
@creativesoundlab
8 жыл бұрын
I think they were 1960s 13 inch Zildjians
@TheYeqy
8 жыл бұрын
Hey bro, great video! I have a question tho, is it plausible to get a similar result with a condenser mic set to figure of 8 instead of the ribbon mic and does it make a difference where the two side mics are pointed at? Thanks! :)
@creativesoundlab
8 жыл бұрын
+Milan Jejina (Yeqy) I think it would be more important to go after the tonality of a dark mic, rather than the exact polar pattern that you use. For it, the center is dark and picks up the drums. Most LDC will get a touch bright if you put them in Figure 8 mode.
@TheYeqy
8 жыл бұрын
+creativesoundlab Ah, I see... thanks for the tip! :)
@lucaridolfo6668
8 жыл бұрын
Nice technique... just one question.. how does it work with a not so good treated room? can I lower the distance of the mics or may I have to choose another different technique? Thanks!
@creativesoundlab
8 жыл бұрын
+Luca Ridolfo This technique is pretty good I think. It's better than Blumlein for a bad room. Yes, if you lower the distance of the mics it may help. Also treat the ceiling first as this can have some really bad affects on overheads with the snare drum.
@lucaridolfo6668
8 жыл бұрын
Thanks for your comment! I want to ask you if Recorder man or Glyn Johns technique is drier rather than this method which you have described... I'm lookin for a solution in order to use 3-4 mics and obtaning a nice dry sound
@creativesoundlab
8 жыл бұрын
+Luca Ridolfo Yeah, if you had a mic for kick and snare, I might even go with an XY as close as you can get it, and then mic kick and snare.
@ciavideoproductions
8 жыл бұрын
Great videos, I just found your site and going to look at it all! Side question, What's your honest opinion about the Rode NTR. I've got a inexpensive ribbon (apex) and also the X15 cascade. In the video it looks like you have three NTR's! Is it worth the leap? Thanks for any feedback, I mean insights.
@ciavideoproductions
8 жыл бұрын
+ciavideoproductions (I mean 2 to 4 NTR's)
@creativesoundlab
8 жыл бұрын
+ciavideoproductions Yeah I like the NTR. I can't speak for how it compares to the ribbons that you have, but it would be a step up in quality. It's got a lot of gain to the mic, and it's very warm sounding.
@ciavideoproductions
8 жыл бұрын
creativesoundlab Thanks for the reply. I just got my NTR and it is a step up in quality and cost. Lots of bottom but I'm also getting full, warm mid range vs. condensers. Thanks for all your videos, they are very informative and concise. Great work.
@mrmegaguitarplayer
8 жыл бұрын
Would I be able to replace the ribbon with a condenser? Just as I don't really have the money to drop on a ribbon xD
@creativesoundlab
8 жыл бұрын
+mrmegaguitarplayer I think it's worth a shot, but it won't be quite the exact sound. The center is going to give low end fullness to the snare and toms. Without a dark mic in the center those drums won't have the low end support that gives the technique it's signature sound. But seriously, try it anyhow. This measurement process is a cut above anything, so give it a shot with what you have.
@Bdmctear
8 жыл бұрын
+mrmegaguitarplayer -- You could try it, for certain.
Пікірлер: 250