EXCELLANT TUTION TYPE VIDEOS, GOOD SPOON FEEDING LIKE BEAUTIFUL LANGUAGE. WELL DONE.
@marineinsight
2 жыл бұрын
Glad you found it useful 👍
@donaldbest1295
3 жыл бұрын
What an interesting presentation. So many variables that I never considered. Thanks for the knowledge and entertainment.
@marineinsight
3 жыл бұрын
Glad it was helpful!
@jomonpalp
2 жыл бұрын
Simply superb presentation
@marineinsight
2 жыл бұрын
Thank you! Cheers!
@praveenn9258
9 ай бұрын
Can you please upload a video regarding construction of Caisson Gate for a graving dock.
@AzzaHabeeb
Жыл бұрын
very informative video. I was wondering where the drawings,details,dimensions of dry docking area in a shipyard would be available?.
@shivan4219
4 жыл бұрын
Good work. This was a pleasure to watch.
@marineinsight
4 жыл бұрын
Glad you enjoyed it!
@sundarviswanathan6500
4 жыл бұрын
Quite educative. Good video. Thanks 🙏🌷
@marineinsight
4 жыл бұрын
Glad you enjoyed it
@pewpewindustries2657
Жыл бұрын
i love docking! 😍
@marineinsight
Жыл бұрын
👍
@simonpender8331
3 жыл бұрын
Very interesting, thank you.
@PranayDsouza
2 жыл бұрын
kzitem.info/news/bejne/lZmbuGSksp2coYo
@megabytesmusic
2 жыл бұрын
Thanks for sharing!
@oldemarcarolbandeira7206
Жыл бұрын
Amazing!
@marineinsight
Жыл бұрын
Thank you for the comment
@ajysingh2038
Жыл бұрын
what calculation is required when is entering the drydock ( virtual loss of gm calculation ) can you explain
@marineinsight
Жыл бұрын
do check this detailed article - www.marineinsight.com/guidelines/dry-dock-types-of-dry-docks-requirements-for-dry-dock/
@gouravmanjariya3426
2 жыл бұрын
Any idea why we take wet sounding of tank and after ship resting on block dry sounding is taken ?
@SyamKumarVoleti
4 жыл бұрын
Excellent video. Great information 🙏
@marineinsight
4 жыл бұрын
Thank you Syam. Please do share and support. 👍🏻
@astlefernandes1429
3 жыл бұрын
Sir the blocks fitted under the keel wen docking in floating dock how they know does yard take the ships plan size of ship ??but those blocks r fitted wer the ship beam remain no?
@shipnet9959
2 жыл бұрын
Thank you for the interesting video and explained very well.
@marineinsight
2 жыл бұрын
Glad it was helpful!
@PranayDsouza
2 жыл бұрын
kzitem.info/news/bejne/lZmbuGSksp2coYo
@astlefernandes1429
3 жыл бұрын
Sir very gud video n gud knowledge for seamen who never did drydock .
@marineinsight
3 жыл бұрын
Glad you liked it
@MegaCaptsparrow
2 жыл бұрын
Excellent content ! Keep making interesting video.I like the animation!
@richardpeterson3753
2 жыл бұрын
Ok.so at 1:27 the part that was being removed has what looks like two fan ducts,what are they,and what are they for?
@danielrostek6449
3 жыл бұрын
Well done, the a lot! But be careful, the CoG does not change when touching the blocks (provided you have no free surface moments). It is the upthrust that is transferred from the CoB to the blocks. However, some literature refers to it as a virtual rise of CoG.
@PranayDsouza
2 жыл бұрын
kzitem.info/news/bejne/lZmbuGSksp2coYo
@warnpassion
4 жыл бұрын
Nice video. Next, please make a detailed video on how floating docks work.
@marineinsight
4 жыл бұрын
Great suggestion!
@ferdinandfrancis9673
Жыл бұрын
When the ship is in dry dock, what does the crew of the ship do, and do they stay at hotels.
@marineinsight
Жыл бұрын
Depends if ship has provided with shore power
@stephenlee6616
3 жыл бұрын
Does a graving dock could both meet the requirements of ship repairing & ship building? For example, capabilities to tanker/container vessel of up to 300 meters L.O.A like that, both ship repairing & ship building, thank you!
@raghav.malhotra
2 жыл бұрын
Great
@FITA-369
2 жыл бұрын
👌👌👌
@marineinsight
2 жыл бұрын
👍
@asivhanzhimudzunga1352
3 жыл бұрын
What are Requiments of dry dock.
@shubhamupman7260
3 жыл бұрын
Excellent explanation 😁✌️
@vaisakhcc2217
4 жыл бұрын
Whats the difference bw shipyard and a dry dock..or is that same
@marineinsight
4 жыл бұрын
Shipyard is used for construction of the ship and dry dock is used for repairs. Usually, a shipyard can have a dry dock.
@KutWrite
4 жыл бұрын
How do floating drydocks sink. I'm sure some kind of tanks fill with water ballast, but the concept is vague in my mind.
@josephbennett3482
3 жыл бұрын
Yes you are correct: floating dry docks suck in sea water into massive tanks which causes the floating dock to sink down then the water is pumped back out when the floating dock needs to lift up.
@rickxiangvlog9332
4 жыл бұрын
drydock are realy interesting ..i been to drydock twice lot of works noice and everything. i did some behind the scene video so if you wanna check it out.. lots of happenings going on
@marineinsight
4 жыл бұрын
Thank you for commenting. We would love to know your dry dock experience 👍🏻
@rramanathan18
2 жыл бұрын
SUPER
@verminer7
2 жыл бұрын
do you guys have a E- Book for docking operation to learn?
@marineinsight
Жыл бұрын
We do have an ebook on drydocking porcedure - learn.marineinsight.com/eBooks/e-dry-dock-combo-pack/
@Aukhan4all
Жыл бұрын
I m searching too
@phumlanieshmael3810
3 жыл бұрын
When should Propellers and Rudders be inspected?
@marineinsight
3 жыл бұрын
During dry docking of the ship
@ridhosanka5224
3 жыл бұрын
How to make sure that ship is in right position to touch the block ??
@marineinsight
3 жыл бұрын
That comes under docking plan
@danielrostek6449
3 жыл бұрын
After touching the first blocks with the stern, there is still the opportunity to adjust the side blocks so that it matches the docking plan. That is why it is so important to know at which draught the stability finally vanishes.
@nightryder9949
Жыл бұрын
Why the stern touches the Keel blocks first why not the stem
@atelierunterderteck7583
4 жыл бұрын
How do you paint the areas of the hull where the boat is sitting on the blocks?
@janvisser2223
4 жыл бұрын
They do not paint that area. It will be done during the next docking.
@atelierunterderteck7583
4 жыл бұрын
@@janvisser2223 ...so the next time the workers must know, which Part of the hull was not painted this time? And what about new ships? Which are both painted Set?
@janvisser2223
4 жыл бұрын
Atelier unter der Teck during the next docking a diver will check the position of the vessel in relation to the keel blocks. Vessels position can be changed by winches on the walls of the dock. Newbuilding is something completely different. Ships are built in large block sections. Placed on steel supports. The blocks are completely painted except for the ends were the section buttwelds are to be made. Those parts are left with only the socalled shopprimer on it. After finishing the buttwelds, including tightness test and NDT, the small areas (about 600 mm wide) needs to be provided with the prescribed coating system (anti corrosive and / or antifouling) Keel blocks will of-course be removed then in those areas. An owner will not accept it otherwise. Back to a regular docking: a shipyard will charge the owners for each block to be removed. Normally, the paint system on the flat bottom part of the hull will be found intact during inspection, making it not necessary to recoat the areas resting on the blocks.
@atelierunterderteck7583
4 жыл бұрын
Thank you very much, Jan! That is very interesting for me and now I have finally understood the processes!
@amit4f2011
2 жыл бұрын
How to go drydock with damaged ship?
@mohamedeldanasory2960
4 жыл бұрын
I think you must state maintenance plans And dry dock requirements
@marineinsight
4 жыл бұрын
Thank you for the suggestion. We can have a separate topic on that
@velagasaisunil58
4 жыл бұрын
Very good explanation Keep it up Plss do a video on Life of a deck cadet
@marineinsight
4 жыл бұрын
Hi Sai. Thank you for your comment. Well noted 👍🏻
@technoidic_ash
4 жыл бұрын
Cool intro🔥👏
@marineinsight
4 жыл бұрын
Hey Ashish Stay Tuned. We have something new coming...
@technoidic_ash
4 жыл бұрын
Bell icon animation?
@marineinsight
4 жыл бұрын
:)
@kundudev1449
3 жыл бұрын
Please keep up
@onkie1189
4 жыл бұрын
ada yg punya diskripsi urut-urutan proses ini g ?
@marineinsight
4 жыл бұрын
Do check our guide -- learn.marineinsight.com/eBooks/e-dry-dock-operations-deck-department/
@onkie1189
4 жыл бұрын
@@marineinsight Thank you
@thomasdelaney9370
3 жыл бұрын
No. No, I never wondered. I only watch videos to be informed without a lot of fluff and meandering. I’m a pretty busy guy and have about four other things I need to do without steering through a lot of garbage, first. Sorry…NOT sorry!
@swasthikshetty6761
2 жыл бұрын
Anna namaste
@Zentina_ir_op
3 жыл бұрын
helo i am michael from tec support and your computer has a virus
Пікірлер: 89