i had the same problem with the starter cover in red lol kept the stock also,i just put a sticker on it
@linksgarage1985
2 жыл бұрын
Yea man. If pissed me off!
@xxgodofcornxx8911
Жыл бұрын
Just purchased a 23sm and been using your videos to help build mine along the way, thank you.
@linksgarage1985
Жыл бұрын
Thank you!! I appreciate you watching!
@CraigSmith568
Жыл бұрын
Laughed my ass off when you were shaking that middle finger at that part. I've done the same thing before. Made my whole day.
@linksgarage1985
Жыл бұрын
Hell yea!!!! Pisses me off lol.
@TTrident660
Жыл бұрын
Damn bro the tin foil is a great idea I didn’t even think of that
@linksgarage1985
Жыл бұрын
Use it for everything! Ha. Thanks for watching!
@Arcangelo_cr
Жыл бұрын
Had the exact same issue with starter cover, sucks bro, I will try to fix it somehow. I wish I had watched your video sooner 🥲
@linksgarage1985
Жыл бұрын
This company reached out to me after this video. And sent me a new part. Update coming soon! Best of luck.
@deezgex
3 ай бұрын
I couldn't use my smallest socket on the nicecnc oil filter cover similar to the one you put on. Had to use open end wrench for mine
@deezgex
3 ай бұрын
Also the nicecnc oil filter cover doesnt allow socket to tighten the nuts on that cover. Had to use open end wrench ugh
@mrsmel269
2 жыл бұрын
nice brother !!! i seen some where on the web the oil cover failed hope it was a one off issue . ill try to find it when im off work and get you info to research . enjoy the weekend and hope it goes slow for you. great sending btw !!!
@linksgarage1985
2 жыл бұрын
Thanks dude! I always appreciate you watching!
@BardstownJustin
Жыл бұрын
Loved this video!
@linksgarage1985
Жыл бұрын
Thanks for watching I appreciate it!
@k0d0kan
Жыл бұрын
It's a cool piece. My only concern is if it happens to get hit by a rock or a drop and breaks, you're stuck...
@linksgarage1985
Жыл бұрын
Yea. For sure.
@gar1603
2 жыл бұрын
Yo man I dig the DRZ content. I notice you have aftermarket handgrips. Did you buy an aftermarket throttle tube or suffer removing the bonded grip from the OEM tube? I went to change them thinking it would be an easy task and it turned out to be a massive PITA. If you went for an aftermarket tube, where did you go and what did you end up getting? Appreciate the content and glad you’re in one piece after the deer. Ride safe brotha!
@linksgarage1985
2 жыл бұрын
Well bro. The grip was a pain. I ended up cutting it off with a razor. But if I had to do to all over, I’d do the Zeta 1/4 turn quick throttle tube. Thanks for watching I appreciate it!
@deezgex
3 ай бұрын
I reached out to them and they told me its possible for a defect here and there. To give them the sku number and they will check. Been over a week and not responded back to me again even after i sent the sku number to them.
@Jeff-dc2xl
2 жыл бұрын
Would the bushing out of the factory cover fit in the new cover?
@linksgarage1985
2 жыл бұрын
Negative. I tried it
@keldonator
Жыл бұрын
I know the weight difference in likely negligible, but it would be interesting to know the difference.
@seanoleary1979
11 ай бұрын
Did you ever measure the id of both bushings and give the company a call? Is it possible there are different sized bushings for different years NiceCNC is unaware of? Pretty f-ed up to make a summary judgement like that without measuring/calling and letting them know so they can make it right.
@linksgarage1985
11 ай бұрын
It’s not fucked up. Yes. I contacted the company. They made a mistake and made a huge batch of bad parts. These bad parts went to thousands of customers. They owned it. And sent me new parts. My summary stands. Other videos on the topic on the channel as well. Thanks for watching. Glad you didn’t make a summary judgment without seeing the follow up video…
@seanoleary1979
11 ай бұрын
@@linksgarage1985 Off the top of your head, give a rough 'guesstimate' of how many of your videos we should have to endure before we get it that you enjoy bashing companies mercilessly for their mistakes - and then stand by your atrocious lack of compassion for said simple mistakes. I understand exaggerating facts for dramatic effect, but I SERIOUSLY doubt bad parts went to THOUSANDS of people. I know I can't let "thousands" of mistakes leave my shop and still expect to be able to put food on the table for my family... NiceCNC wouldn't be in business today if that was the case.
@linksgarage1985
11 ай бұрын
@@seanoleary1979 they sure did. Thanks for watching!
@funshine3571
Жыл бұрын
There's actually a drain plug for the filter. Total of 3 drain plugs.
@linksgarage1985
Жыл бұрын
Yes. I know. However, there are horrible stories of that bolt getting messed up, or issues with the case in that spot. So I leave it alone. Thanks for watching I appreciate it!
@703CrailTap
Жыл бұрын
Contrary to the beliefs of some, that's not a drain plug - it's the main oil galley plug. Used for pressure testing. Not needed or recommended to mess with for an oil change.
@funshine3571
Жыл бұрын
Thanks for the info. It saves me a lil mess but i'll take into account. 🤘
@deezgex
3 ай бұрын
Are you using a impact on the starter cover side?
@eldurorapido3512
4 ай бұрын
how to change coolant
@lionlocVanDwellington
10 ай бұрын
Could you just use the oem spacer in the clear starter cover?
@linksgarage1985
10 ай бұрын
No. It would not come out of the nice CNC cover. I tried. They sent me a new one. I made a follow up video. All is well.
@willknott4796
Жыл бұрын
Love it😂 blast it with the 7.62x39 🇺🇸
@linksgarage1985
Жыл бұрын
Hell yea! 🇺🇸💪🏼🇺🇸
@jessel1217
Жыл бұрын
the torque spec on those screws are only 10ft lbs. Use your hand tool!
@linksgarage1985
Жыл бұрын
Sweet!
@anthonywagner7648
Жыл бұрын
Could you have swapped bushings?
@linksgarage1985
Жыл бұрын
No. Wouldn’t work
@dcjano75
Жыл бұрын
you could of returned it? Again, you saved me from future aggravation... Keep the vids coming!
@linksgarage1985
Жыл бұрын
Shooting it was so much cooler dude. 💪🏼
@dcjano75
Жыл бұрын
@@linksgarage1985 agreed! 🔥🔥🔥🔥🔥🔥🔥
@phillipautwell5723
Жыл бұрын
Be very careful with there products such as clear cam cover windows with bolts on the inside.. the bolts don't have lock Tite and fall into the motor causing some severe issues..
@linksgarage1985
Жыл бұрын
Good call.
@phillipautwell5723
Жыл бұрын
@@linksgarage1985 I've actually spoke to the company there suppose to have a 2.0 version.. but I'd honestly just get the one from monster with the bolts on the outside..
@linksgarage1985
Жыл бұрын
@@phillipautwell5723 I guess I’m not sure what you mean. There were no bolts on the inside of this.
@phillipautwell5723
Жыл бұрын
@@linksgarage1985 that is a clear oil filter housing.. I said such as clear cam cover windows.. I was just letting it be know certain things are ok and some cause catastrophic failure in the engine... I hope that clears the confusion.. just spreading known first hand knowledge..
@linksgarage1985
Жыл бұрын
@@phillipautwell5723 ahh. I’m following you.
@dcjano75
Жыл бұрын
can you send the link to the Clear Oil Filter Cover? thanks
@linksgarage1985
Жыл бұрын
crazy sport Engine Oil Filter... www.amazon.com/dp/B08JK9BL48?ref=ppx_pop_mob_ap_share
@dcjano75
Жыл бұрын
@@linksgarage1985 Thank you!
@djeq721
Жыл бұрын
Did you end up keeping the oil filter cover? Any issues long term? Currently looking at one, UK SM Cheers!
@linksgarage1985
Жыл бұрын
Yes. The oil filter cover has been good. No issues! Thanks for watching!
@davidhoward8951
7 ай бұрын
Where did you buy this
@jamescall25
Жыл бұрын
What exhaust system is that.
@linksgarage1985
Жыл бұрын
Enjoy. kzitem.info/news/bejne/mW6qzIKDn5iki5w
@oldschoolsmokedmeats2943
2 жыл бұрын
BigDog -
@jayminasi6073
5 ай бұрын
that is not the oil filter cover
@linksgarage1985
5 ай бұрын
You are correct. It’s the cover for the muffler bearings.
@jayminasi6073
5 ай бұрын
i know, i had to replace one of those myself one time. @@linksgarage1985
@robott6696
Жыл бұрын
Lol, what a man child. In his 50's but bikes looks like a tween girl owns it
Пікірлер: 65