Great idea that looks way better! Yeah, if it's Aluminum, I always think of it, like a cake of soap, before I snug it down. Almost as bad as plastic!
@linksgarage1985
Жыл бұрын
Thanks for watching!
@maxwell9734
Жыл бұрын
@@linksgarage1985 thanks for showing the entire thing, some u-tubers would have edited that out. 👍
@linksgarage1985
Жыл бұрын
@@maxwell9734 yep. Is what it is dude. People need to see it all. Not just the good shit.
@OnlyDamp
10 ай бұрын
“Idk the torque spec on these but Ik they need to be tight” snaaaap
@linksgarage1985
10 ай бұрын
She gone
@PadmaDorjee
Жыл бұрын
Your videos are awesome, thanks for all your videos
@linksgarage1985
Жыл бұрын
Thank you!!!!!
@sharpbj
Жыл бұрын
Bam Bam! Looks awesome. Great Idea sir!
@linksgarage1985
Жыл бұрын
Thanks for watching man!
@zrx1100zz
Жыл бұрын
Easy big boy it's aluminum!!!! It's called torque specs for a reason 😳🥃🛵☁️☁️☁️
@linksgarage1985
Жыл бұрын
Is what it is 🤷🏻♂️
@elementboi151
Жыл бұрын
nice, this is where i have mine. but im also running protapper bar mounts so it wouldnt fit there anymore anyways. keep them coming man!!!!!!!!!!
@linksgarage1985
Жыл бұрын
Hell yea! I got more coming for sure. And btw, I love your YT name. Cool af.
@mrsmel269
Жыл бұрын
great work brother !!! sucks you had to do some fab work. enjoy the weekend.
@linksgarage1985
Жыл бұрын
All good my man. I like it. Have a great weekend!
@terryerickson4697
Жыл бұрын
Another great video. I have been thinking of doing the same thing with my ignition. Sucks that part cracked on you. That’s why I like your videos shit happens. They actually sell that ignition holder that is designed to go where you installed yours. Uses both of the mounting bolts.
@linksgarage1985
Жыл бұрын
Yea. I had no idea they sold those brackets. lol. And yea, can’t just show the good stuff. Got to show the bad shit 2. New one is supposed to be here tomorrow.
@mjf1517
Жыл бұрын
I like how you sold the sleek bar look. You have yourself a really nice bike 👌. The whole set up is awesome
@linksgarage1985
Жыл бұрын
Thank you!!
@douglaspeterson7006
Жыл бұрын
Hi there; Found the video on moving the ignition. Thanks
@dawidbarczak4736
Жыл бұрын
best chanell on whole youtube :)
@linksgarage1985
Жыл бұрын
Thank you!!!
@kriskris5330
Жыл бұрын
Love all the videos! This is a great idea. Are you planning on doing a PAIR removal video?
@linksgarage1985
Жыл бұрын
Thanks! And I’m not sure. It’s possible
@CraigSmith568
Жыл бұрын
Damn Hulk, take it easy. So did you order a stock replacement or something aftermarket?
@linksgarage1985
Жыл бұрын
Something different. Already got it on. Video coming soon. Hulk Smash!! 💪🏼💪🏼
@94Greenbean
18 күн бұрын
Can I ask if you had to trim just a little bit of plastic from the headlight fairing to get that hole to lineup for the screw right there by the ignition switch now?
@linksgarage1985
18 күн бұрын
No. I didn’t trim anything from the headlight bucket. It worked for me. Thanks for watching!
@keldonator
Жыл бұрын
The previous owner did thus to mine, makes for a good spot for phone mount. He didn't cut the extra hole off though, this looks cleaner. I may just have to trim it down.
@linksgarage1985
Жыл бұрын
You can do that, or, you can buy a mount on eBay, with 2 holes already drilled. Like $10. I never knew it existed until I did this. Lol. Either way, thanks for watching I appreciate it!
@keldonator
Жыл бұрын
@@linksgarage1985 Oh sweet, thanks for the info
@linksgarage1985
Жыл бұрын
Also. I subbed. I’m sub #9. 💪🏼
@edwardvanwormer6993
8 ай бұрын
Great idea for relocating the ignition. What front turn signals are you using? Thanks.
@linksgarage1985
8 ай бұрын
At this time I was using the TST industries signals. I now have the integrated zeta signals in the hand guards. Thanks for watching. Many many more DRZ vids on the channel
@edwardvanwormer6993
8 ай бұрын
@linksgarage1985 thanks, I actually found the install video for them. Great channel!
@linksgarage1985
8 ай бұрын
@@edwardvanwormer6993 thank you!
@alexgroezinger762
Жыл бұрын
Hey man with the jetting, exhaust, and 3x3 mode, what mpg do you get?
@linksgarage1985
Жыл бұрын
Well I ride it pretty hard and still get like 50 or better
@hamish8608
Жыл бұрын
Any issues with the key falling out while riding? If so how do you mitigate that possiblity?
@linksgarage1985
Жыл бұрын
Zero issues and I’ve put a bunch of miles on it. To mitigate it completely eliminate the possibility, don’t have a big flapping key tag like mine. Ride with the key only. .01% chance it would pop out then. Good luck. 💪🏼
@kyjelly5524
Жыл бұрын
Looks great. Would suck if you crashed on that side and broke the key off in the ignition:(
@linksgarage1985
Жыл бұрын
Hot wire it!
@ztotheigg
Жыл бұрын
I just started watching all your videos. Good shyt man. You need to get yourself a torque wrench and figure out your torque specs. Every bolt you tightened has been way over done. Not givin you a hard time. Just hate to see you strip something out thats more expensive then this lesson. Keep the good cideos comin 🤘
@linksgarage1985
Жыл бұрын
I have many torque wrenches. Usually just use them on critical fasteners. Thanks for watching, I appreciate it!
@ztotheigg
Жыл бұрын
@@linksgarage1985 find them torque specs. You keep makin em ill keep watchin 👍
@vitalyyuro
Жыл бұрын
Hey was wondering does your exhaust pop when letting off the throttle?
@linksgarage1985
Жыл бұрын
Not a ton. But a little. Yes.
@vitalyyuro
Жыл бұрын
Thank you. Keep up the awesome video's
@linksgarage1985
Жыл бұрын
@@vitalyyuro thank you for watching! And the bike has the exhaust, the jet kit, and the 3x3 mod .
@vitalyyuro
Жыл бұрын
@@linksgarage1985 I did the 3x3 and jet kit following your videos for the steps. Mine pops if I'm slowing down and low in the rpms when high is doesnt
@linksgarage1985
Жыл бұрын
@@vitalyyuro you should be good to go!
@keasone
Ай бұрын
23nm it is 😅
@linksgarage1985
Ай бұрын
🤣🤦🏻♂️
@dannypuente6492
Жыл бұрын
can you send the link to those mirrors? thanks!
@linksgarage1985
Жыл бұрын
Bought on Amazon. Just search powermadd mirrows
@theHeath
Жыл бұрын
How do you take the stock mount of the ignition and use the gold jfg bracket?
@linksgarage1985
Жыл бұрын
Just the 2 bolts on the LH side of the clamp. Undo them and the bracket will pop off.
@theHeath
Жыл бұрын
@Link’s Garage yeah I got that off. But the actual ignition out of metal circle clamp so I can use gold one? If that makes sense lol not sure how to take it out of stock bracket
@linksgarage1985
Жыл бұрын
@@theHeath there’s a very thin nut on the bottom. You just unscrew it, and pop it out.
@theHeath
Жыл бұрын
@@linksgarage1985 Sweet! You're the man bro🤙
@theHeath
Жыл бұрын
Did the rubber killers, air filter, pegs, all jfg levers, fender eliminator, case savers all off your vids! Thxs bro! Looking at the Delkevic exhaust next but really want the yoshimura but it's so expensive
@GotusTotus
2 ай бұрын
Any reason why my bike has no power after the relocation? Like no power to anything
@linksgarage1985
2 ай бұрын
Something isn’t hooked up right. That’s really all it can be. Somethings unplugged. Or the battery is dead
@GotusTotus
2 ай бұрын
@@linksgarage1985 ended up being a 20A fuse
@linksgarage1985
2 ай бұрын
@@GotusTotus there you go. Had to be something simple. Other than that, everything go ok?
@GotusTotus
2 ай бұрын
@@linksgarage1985 is there a way I can send you a photo of the subframe from the back? I think it’s just bent where the test industries rear light connects to the subframe and I can heat and bend it. Just want your opinion on it since a new oem subframe is 600 bucks
Пікірлер: 72