Hello, these types of videos are somewhat significant, but they should last longer, but in detail the distribution, see its set-up, as we say here in Mexico, there is still a lot left to see or record rather... thank you for doing so.
@francescopaolomancini7597
Жыл бұрын
Video ben fatto anche nei particolari e nella messa in fase del motore. Ottimo lavoro. Ci vediamo al prossimo video!!
@yoonracing7739
Жыл бұрын
thank you~ so much...
@serialgolfer
2 жыл бұрын
The Superquadro is a beautiful engine! I rebuilt my 1299 panigale engine last year during the pandemic and it’s certainly more complex to work on than most inline 4 cylinder engines! I’ve noticed the upper rod shell bearings really get worn out when the bike is used on track! I’m running the bike with a H20 performance wsbk radiator now with dedicated oil cooler so I’m interested to see how the bearings look with a lower oil temp when I next rebuild it this year!
@chrisv-l3835
Жыл бұрын
Any Updates?
@serialgolfer
Жыл бұрын
@@chrisv-l3835 yeah the bike has run well for the last 2 years after I refreshed it. But I will probably rebuild it next year as the engine has 20000miles on it and 10000 are track miles. I will rebuild with new pistons next year!
@yoonracing7739
Жыл бұрын
thank you for a good advice serialgolfer~ you know what is ~ in korea H2O radiator is too expensive~ so I always recommend to my customers but not come to happen~
@serialgolfer
Жыл бұрын
@@yoonracing7739 yes it’s a very expensive option I have to say. But it has made a big difference to operating temperatures of the bike! This year in mugello the air temps with 36c and the coolant never went above 88c. Where as with the standard radiator it was at 100c with the fan constantly on in 25c air temps. So if the bike is solely used for track and will experience warmer air temps it is a useful upgrade!
@chrisv-l3835
Жыл бұрын
@@serialgolfer Thanks for the valuable feedback. My 1199 has done nearly 40000 miles but %99 of that is road. So im looking at a rebuild soon especialy if I want to do more track days. I'm not bad with most of it but dont have any of the special ducati tools yet.
@loopie007
11 ай бұрын
I admit the V4's make more power, but I love the feeling of the big twins!
@Cys62
2 жыл бұрын
Loves your workmanship and video footage...
@yoonracing7739
Жыл бұрын
thank you so much...
@slvr1.618
2 жыл бұрын
Stumbled on your channel and gave it a immediate sub, relaxing and enjoyable filming style and my favorite part is showing the work and doing the work, sadly most youtube channels now days have too much talking and not enough 'getting to it'.
@yoonracing7739
Жыл бұрын
thank you~ H DB you make me feel good. that was my point... thank you so much, i'll make more relaxing film for my channel subscribers.
@D3xZero
10 ай бұрын
good work man, spotted the subby nice ;)
@loredanaferreri
6 ай бұрын
Bel video complimenti 🤙🏻
@haroldpeagler1430
Жыл бұрын
I am late to the party in just seeing your mastery at work you have become my inspiration on builds 👍🏿
@yoonracing7739
Жыл бұрын
thank you so much Harold... I'll do my best~ 👍
@jackgreen9062
Жыл бұрын
Nice work. I have built several older ducatis. The engineering of the new ones like yours seems very familiar to me. They are quite complex even back to the bevel drives of the 1970s but worth the effort when it comes to riding them. 🛠🍸
@yoonracing7739
Жыл бұрын
thank you jack, i agree. we should keep working on!!!
@mutaek
9 ай бұрын
맨날 외국 엔진 빌드 영상보다가 한국꺼보니 편안하네요
@mbrr9200
2 жыл бұрын
수고많으시내요~~~^^♡
@yoonracing7739
2 жыл бұрын
감사합니다, 보고싶네요 형님🙂
@usernemetc
8 ай бұрын
ну просто круто.настолько идеально микрометры ,если даже не нанометры))) , ПРОСТО КРУТО.👍👍
@oliviervilaseque
9 ай бұрын
Very nice !👍👍
@Mdbikeservice
Жыл бұрын
Good 👍
@rafaelcodina157
7 ай бұрын
muy buen video, fantastico motor, una maravilla
@Danscraigslist65
4 ай бұрын
Is there any way to split the cases without pulling the cylinders first? I don't have the cylinder puller tool. Thanks
@fogelly
9 ай бұрын
Hey, simply WOW !
@user-kd6gv5kc6m
2 жыл бұрын
멋지네여 ..와웅
@yoonracing7739
Жыл бұрын
감사합니다.
@luisbatista597
7 ай бұрын
👏💪💯😎🏆
@Atanrurichannel
2 жыл бұрын
Nice bro..bigger angine ducati perfect
@yoonracing7739
Жыл бұрын
thank you, Atan
@user-km1vk7bj7m
Жыл бұрын
오일팬 설계참 잘햇네요..
@yoonracing7739
Жыл бұрын
맞습니다, 부장님^^
@torr-michaelbennetta9785
7 ай бұрын
Reusing pistons instead of replacing?? How many hours were on these pistons? Great video, love the chill music.
@ghtjs521
2 жыл бұрын
잘 타겠습니다! 감사합니다!!😆
@yoonracing7739
2 жыл бұрын
즐거웠어요, 호선씨 ~ 커피도 잘 먹었어요^^
@rikzkiiiii8
Жыл бұрын
amazing giant pistons
@yoonracing7739
Жыл бұрын
yes it is...
@lavozia714
8 ай бұрын
Where can I order the Ducati engine stand from. I have looked everywhere for it. Thanks
@jenerictv4186
Жыл бұрын
bro i have a question, its my first time to rebuild a ducati panigale v2 engine. so installed it on the body, and tried to start it, suddenly there is to much oil dripping from somehwere on the horizontal cylinder. i check the hoses its all attached and clamped. i dont know where this massive oil leaking coming from. please help
@sleelakrishnan
Жыл бұрын
Lovely Lesson 😍😘
@yoonracing7739
Жыл бұрын
Thank you for watching 😊👍
@frandeleon3421
Жыл бұрын
Recién armado!!! Cagandola a palos… y desconectándola de RPM…. Buen método 😓😓😵💫
@prestigewild6229
2 жыл бұрын
wow smart production engine
@yoonracing7739
Жыл бұрын
yes it is...
@efloresflorese5594
Жыл бұрын
What Rolex is that and MM, have you seen the new Rolex Titanium Yacht master ? Luv yor vids. Came here searching for Dry clutch conversion.
@sergiopenaranda9491
2 жыл бұрын
Saludos desde Colombia 🇨🇴👏
@yoonracing7739
Жыл бұрын
thank you
@msnalendra
9 ай бұрын
The sound like mini trail 100 cc...🤣🤣🤣🤣lol
@valeriobruscella6847
9 ай бұрын
Hai dovuto rettificare o sostituire l albero motore?
@matteo150893
2 жыл бұрын
hello ! Congratulations on a great job! i found this channel yesterday! I am a mechanic and auto electrician for 7 years in "Kia, Mitsubishi, Hyundai ssangyong, I own a Ducati Monster 821 stealth and a Ducati Monster S2R 800, but was this work under warranty or for a fee?
@yoonracing7739
Жыл бұрын
thank you... this work is not under warranty...
@eez2924
Жыл бұрын
personally i wouldn't use grease for assembly, you should try assembly lube it's better
@yoonracing7739
Жыл бұрын
that grease is for race engine...
@ayansarma6034
Жыл бұрын
Love from assam....india
@yoonracing7739
Жыл бұрын
thank you, i like your country
@AbdurrahmanZedSaeed
6 ай бұрын
9:17 what do you call the device for timing dial?
@Tequilasaur
Ай бұрын
What a huge plastic ferris wheel there
@serialgolfer
2 жыл бұрын
Can I ask you what is that stuff you spray on the pistons to clean the carbon off? It looks like it does an incredible job of removing it!
@yoonracing7739
2 жыл бұрын
of course, you should find a Carb and Choke Cleaner (bubble type) i don't think my cleaner is international product...
@serialgolfer
2 жыл бұрын
@@yoonracing7739 thank you very much! I will give that a try!
@yoonracing7739
2 жыл бұрын
@@serialgolfer you're welcome🙂
@EricSajid
Жыл бұрын
where do you find this golden key to tighten the starter
@yoonracing7739
Жыл бұрын
nepros tool from japan.
@williamyazmaciyanamaduni2794
Жыл бұрын
Nice Motor….
@arieffath2797
Жыл бұрын
Konstruksi mesin yg rumit
@yoonracing7739
Жыл бұрын
yes it is...
@leotaduy1449
2 жыл бұрын
Ráp máy chuyên nghiệp ghê mà phải cạo cái keo ron đi cho giống xe zin ❤️❤️
@yoonracing7739
Жыл бұрын
??????
@NTVASx86x64
2 жыл бұрын
아름답군요
@yoonracing7739
2 жыл бұрын
감사합니다, 엔진이 정말 아름다운것 같아요🙂
@Doc___
2 жыл бұрын
👍🔥
@yoonracing7739
Жыл бұрын
👍🙏
@abdulbasheer9971
Жыл бұрын
Nice? Great job…
@yoonracing7739
Жыл бұрын
thank you, Abdul
@user-hu8vn2lv7x
Жыл бұрын
아 다시 파니타고싶어진다......
@yoonracing7739
Жыл бұрын
다시 타시면 되죠!!!
@umitbagc4822
2 жыл бұрын
😘👍
@nayanjagirdar8408
2 жыл бұрын
👍
@yoonracing7739
Жыл бұрын
👍
@mugiofficial1124
2 жыл бұрын
👍👍👍👍👍👍👍👍👍👍👍
@yoonracing7739
Жыл бұрын
😁👍👍👍
@user-ks6cp4ly2q
2 жыл бұрын
메탈 베어링이 왜 저렇게 빨리 마모가 올까요 궁금 하네요
@yoonracing7739
Жыл бұрын
트랙 사용 바이크는 사실 마모가 많이 빠릅니다.
@blanc1971
Жыл бұрын
마일리지가 어떻게 돼는지는 모르겠지만 정밀설계 부재로 내구성 부족 아닐까요!
@user-ks6cp4ly2q
Жыл бұрын
@@blanc1971 공감 합니다 리빌트 햇어도 백연이 나오는게 보이네요 😢
@eugenioandreaesposito6583
Жыл бұрын
Hi there, the Snap-on torque wrench is the ATECH3FR250B or the ATECH3F300RB? Thank you in advance.
@yoonracing7739
Жыл бұрын
I should check...
@eugenioandreaesposito6583
Жыл бұрын
@@yoonracing7739 Thanks!
@valeriobruscella6847
9 ай бұрын
Ma la pompa olio l hai sostituita?😮😊
@oldm8alfie
Жыл бұрын
Do the Panigale v2 have titanium rods and valves ?
@yoonracing7739
Жыл бұрын
No it doesn't 😊 only R use titanium rods and valves, Alf.
@oldm8alfie
Жыл бұрын
@@yoonracing7739 ah Thankyou for your reply. Have you had many issues with the 955 superquadro ? I’m torn between the Panigale v2 and a gsxr 1000.. I know the Suzuki has reliability, I just don’t want to make the wrong decision. The Panigale v2 just looks so good
@randilupradeep655
Жыл бұрын
How many piston are there
@colinmartin2921
8 ай бұрын
12
@gwee7725
Жыл бұрын
🥰🥰🥰
@yoonracing7739
Жыл бұрын
😁👍
@Street_Fighter_
2 жыл бұрын
Gold hands of the mechanic, i am too just for cars. How much for that work? And how much time for delivery Ducati items from here (Italy) to Japan 😂
@yoonracing7739
2 жыл бұрын
I appreciate your reply, Luca. Which car company do you work for??? In this case my labor was 43 hours~ actually I live in seoul Korea, Im korean. Generally delivery time is depends on ship or air... ship 3~ 4 weeks Air is about in 10 days...
@Street_Fighter_
2 жыл бұрын
@@yoonracing7739 oh sorry: D, I thought it was japan. I took a multi-brand car workshop from my father, but we also make motorbikes for passion, Ducati fans. I really appreciate the maniacal nature of your work and the care for the Ducatis. soon I will have to do valve service on my street848.
@Street_Fighter_
2 жыл бұрын
@@yoonracing7739 sht 43 hrs, take a lot of time this superquadro, to do, but i understand, i probably didnt know where to start. Bad news for the customer 😂
@yoonracing7739
2 жыл бұрын
@@Street_Fighter_ are you Italian? Right? Your name is should be Italian ... work on cars and bike is so great Luca. Im one of big fan of Ducati, also work with Ducati... so im happy to work everyday. I spent more than 43 hours I think... anyway thank you for your reply and have a nice day🙂👍
@Street_Fighter_
2 жыл бұрын
@@yoonracing7739 you too! Good night i guess!
@user-zq4og6bj8y
2 жыл бұрын
시동을 걸었는데 엔진경고등이!!!
@yoonracing7739
Жыл бұрын
배기 밸브 때문입니다, 저희는 업맵은 진행하지 않구요.
@jorgechacon1426
Жыл бұрын
💯🇨🇴💪💪
@yoonracing7739
Жыл бұрын
😁👍👍
@TFV-Motorcycles
2 жыл бұрын
Top speed?
@yoonracing7739
Жыл бұрын
im not sure ~ but, not over 300 km
@Moon43143
10 ай бұрын
piston as big as a bowl ☠️
@evo5349
Жыл бұрын
If race fuel is used the engine will run much cleaner.
@yoonracing7739
Жыл бұрын
in korea~ it is hard to find...
@chicosalsa0162
2 жыл бұрын
̶P̶o̶r̶n̶ Motorhub 💯
@yoonracing7739
Жыл бұрын
😁👍
@handle690
2 жыл бұрын
Vincenzo is that you?
@yoonracing7739
Жыл бұрын
im not...
@ncjsgrki
2 жыл бұрын
9:36 Why not replace the plastic water pump gears to steel?
@pauld8573
Жыл бұрын
for what ? they dont brake or something metall would require more lube and is havier so more rotating mass
@ncjsgrki
Жыл бұрын
@@pauld8573They actually do brake frequently and when they do, they can destroy engines. I do agreed that heavier gears will probably make the bike lose power.
@yoonracing7739
Жыл бұрын
I think that plastic gear is much better than steel... super quadro engine is near racebike engine...
@maribaek1983
Жыл бұрын
I want Ur tool trolley
@yoonracing7739
Жыл бұрын
u can buy on ebay
@austinperkins1986
Жыл бұрын
Great video. Just an FYI, do not torque from anywhere other than the center of the handle. Torquing from the end will give you a false torque at the bolt/nut, because your arm length is almost 2.5 inches too long.
@lifelesskids
Жыл бұрын
Torque limit still the same.
@chasebelcher7932
Жыл бұрын
How do you work that out because the torque is set by the ratchet.
@bryanharrison3889
Жыл бұрын
I couldn't do it. I can't justify spending that much time and money on an italian bike. Waste of money.
@kylerobinson9748
Жыл бұрын
And what do you ride?
@hellokatze8910
6 ай бұрын
@@kylerobinson9748CFmoto ✔️
@aneudysc
3 ай бұрын
I sort of agree with you. I had the same line of thought when I looked at mine.
@chrisv-l3835
Жыл бұрын
Very professional job. Can I ask what is the small white plastic bottle you added to the bike next to the oil heat exchanger. see link drive.google.com/file/d/1nYygFbslkzk910WHp55norFfwyBcAS1l/view?usp=share_link
@yoonracing7739
Жыл бұрын
thank you, chris~ that white plastic bottle is for fuel catch tank...
Пікірлер: 154