Very well done, clear and precise instructions, thank you
@antennasbc
4 жыл бұрын
Great video, lots of explanation for a new person like me. Thanks!
@SingleReedProductions
Ай бұрын
Only thing I will say is do not wear long sleeves while working.
@gregorycombs2527
3 ай бұрын
Need to roll up your sleeves, another safety factor.
@billBob-x5n
8 ай бұрын
What chuck do u use?
@gamingwithgavin731
2 жыл бұрын
I have the same Lathe as you! I was wondering where to get that Colic chuck at? I've looked and don't know what size i need for my harbor fraight 10x18 mini lath
@ReelDealOutdoorsTV
2 жыл бұрын
Hey man I just got mine off of Amazon back when I bought it. This PSI set is what I bought. www.amazon.com/PSI-Woodworking-Products-LCDOWEL-Collet/dp/B004CVJBZS/ref=sr_1_2?crid=2PQGOG3I6ODI6&keywords=collet+chuck&qid=1641576437&sprefix=collet+%2Caps%2C154&sr=8-2
@gamingwithgavin731
2 жыл бұрын
@@ReelDealOutdoorsTV Thanks so much, hope to see some more duck call builds!
@thomascox3409
Жыл бұрын
Great instructional video. I just wonder what kind of gum you are chewing cause it must be good lol.
@michaelhanners6745
11 ай бұрын
Great video. Thanks for sharing! What model is the 4 jaw chuck you are using on your lathe?
@fredrausch3208
Жыл бұрын
Do you make the mouth piece? Is there a video? Thanks 👍🏻
@drew_de8990
2 жыл бұрын
Doing this for a woodshop proj in school and get one shot so I wanna make mine sweet! This helps big time
@whizartscustom5230
3 жыл бұрын
Great video, I turn many other things, but never a duck call. Great instruction video!!
@farmlender1
2 жыл бұрын
Awesome video - thanks for the great explanations
@terryashley1762
2 жыл бұрын
Where do I buy the tools to turn the duct call?
@mikewallace8087
2 жыл бұрын
I also notice you are wearing a wedding band on your left hand and a long sleeve sweat shirt next to a spinning work piece.
@ReelDealOutdoorsTV
2 жыл бұрын
lol yeah I got one of those rubber wedding rings since. Still wear the long sleeves. My skin is sensitive to a lot of the woods I work with. Necessary risk.
@whisperingmeadows7516
3 жыл бұрын
I know it probably a far reach with how long this videos been out but, do you happen to know the brand of the expanding mandrel you used or where you may have picked it up? Awesome video BTW.
@ReelDealOutdoorsTV
3 жыл бұрын
Yeah I got it from Pintail Waterfowl. Check out their site. www.pintailwaterfowl.com/product-category/call-making-tools/ Lots of good stuff on there. Thanks for checking out the video.
@johnrooney5020
2 жыл бұрын
Excellent video, slow and very clear
@caidongordon3146
3 жыл бұрын
Best duck call making video on KZitem no doubt! Where did you buy the carbide cutter tool I need one of those!?
@ReelDealOutdoorsTV
3 жыл бұрын
appreciate it :) Got the cutter at Woodcraft, but I'm sure you can find them cheaper online somewhere like Amazon.
@hardingmasonry
3 жыл бұрын
Thank you for the great video!
@ВікторШафалюк
3 жыл бұрын
Where tobuy a jig site
@bayoufowlduckcallsbojackso3763
4 жыл бұрын
The box that goes over the lathe with the plexiglass do you have the dimensions I would like to make one
@ReelDealOutdoorsTV
4 жыл бұрын
Bo Jackson nah I was just flying by the seat of my pants when I made it. I don’t have it here with me. I moved since this video and it’s in my old shop still. I’ll grab it next time I go over and measure it out if you’d like
@Thesoutherngrindoutdoors
4 жыл бұрын
Where did you get your 4 jaw chuck and your tail stock?
@ReelDealOutdoorsTV
4 жыл бұрын
Tail stock came with the lathe but I got the Chuck on Amazon. I wouldn't recommend this one. It's pretty dangerous. Theres a better design out there where the teeth don't stick out like they do on this one.
@williampeak8851
3 жыл бұрын
Where can I get a 5/8 mandrel?
@ReelDealOutdoorsTV
2 жыл бұрын
Sorry for the delayed response here. I got mine from pintail waterfowl. www.pintailwaterfowl.com/product/58-expanding-duck-call-mandrel-rough/
@blackfox3082
3 жыл бұрын
That was the start, but wheres the finish?
@ReelDealOutdoorsTV
3 жыл бұрын
Never got around to making the video man. I moved to a new place and haven't gotten a shop setup.
@blackfox3082
3 жыл бұрын
@@ReelDealOutdoorsTV Understood sir, looking forward to part 2 if it comes out
Пікірлер: 33