CHECK OUT THE KICKSTARTER PAGE: bit.ly/DungeonCraft_KS I'm amazed how many comments are showing up about cutting them out ruining the thing on the other side....or why are they double sided if you are cutting them out......come on guy! These ARE DOUBLE SIDED PIECES AND THEY LINE UP FRONT AND BACK. Cutting it out doesn't ruin the thing on the other side!
@garfieldwithissuez
5 жыл бұрын
Posting to help with the algorithm.
@runewang3192
5 жыл бұрын
My first thought was this book is maybe good to use as templates when building terrain/houses.
@ironalex28
5 жыл бұрын
I WAS gonna get it... if they shipped to my country...but they only have like 5 shipping possibilities and alas I am not one of them =/ Plus shipping alone is almost enough to cover an entire second copy of the book if I could ship it to my place
@seasider15
5 жыл бұрын
Is it because at some points you're turning more than one page at a time? Because I want to believe you, it looks and sounds great, but at certain points when you turn a page the opposite face would definitely ruin the previous page.
@stevesmith5963
5 жыл бұрын
I was initially thinking the same thing about the "ruining", I even re-watched the video to see. I think it just looked that way because in the beginning as you were flipping through it, the pages weren't concurrent!? so it looked like they weren't lining up correctly.
@clifb.7182
5 жыл бұрын
When I was in the Army many years ago, back in the 80s, I learned that I could protect my maps and other training materials I use in the field with clear shelving paper so when I got home I covered all of my RPG maps. I had half-dozen poster sized city maps and I used clear shelving paper to laminate all of them. Aside from being water resistant, you can also write on them with erasable markers (check first to make sure). Anyway, I think this process would work well with something like this. Remove the entire sheet from the book, cut your shelving paper big enough to fold over one edge so you can do both sides, place the paper on a smooth flat surface and peel back about an inch of the protective layer on your shelving paper. Stick just this narrow edge to your table and push the edge of your graphic to the adhesive's edge. Then, with the back of a spoon or a roller, slowly start pushing the shelving paper over the graphic as you pull the protective sheet on the other side. Go slow and when you get to the edge, flip your graphic and cover that side. Once the shelf paper is applied, use a razor or a hobby knife to cut around the edges of the image you want to cut out. Do BOTH sides, then cut it out and trim it. I used this process to laminate an entire Ranger Handbook 30-years ago so I could use it as a training aide and it still looks ... well, strange, but it serves its purpose.
@sgt-slag
5 жыл бұрын
If you do not have a color scanner, get one! Scan the pages, print them onto full-sheet label paper, cut, attach to cardboard, use, re-use. If you lose it, print another copy. This way, you can have as many of each as you desire, or need. Your original will remain intact, on the shelf. My color laser printer has a built-in scanner/copier, which outputs either B&W copies, color copies, as well as shrinking and enlarging. Technology is your friend. Cheers!!
@mszoomy
5 жыл бұрын
I was thinking about laminating the pieces so they last longer as well
@JayG63
5 жыл бұрын
I bought the $30 book, at Emerald City Comicon, a few months ago and I love it. They hadn't begun ths Kickstarter yet and the book was unbound. Although I build 3d terrain, I really like this set for travel purposes. I highly recommend it, especially for those who can't/don't want to spend big $ for expensive terrain.
@travisshallenberger9486
5 жыл бұрын
Dude, I ain't even 2 minutes in and I'm sold. $30 bucks for something like this is a great idea, and a heck of a bargain. EDIT: Now that I've watched the whole thing, I'm even more impressed. The monster tokens are a huge plus. One thing that is sorely lacking in tabletop RPGs is affordability. Not everyone has $40 to plunk down for a few orc soldiers that will die almost as soon as they're encountered. I think I will back this product no problem. (Also "and you just throw out this one ring." Yeah right. Like it's that easy. Just ask Frodo.)
@shinankoku2
5 жыл бұрын
Travis Shallenberger yeah, me too. I’m pretty much sold.
@NeflewitzInc
5 жыл бұрын
I hate that I never have the right miniatures on hand for what the party is fighting. Years ago I bought Descent: Journeys in the Dark and I use those miniatures for almost everything. I can either use those or pay $30 for two of the 15 orcs I'll need for an encounter in a module.
@broke_af_games9661
5 жыл бұрын
No truer words spoken "players do like to set things on fire" Pretty cool product.
@Kaimanshead
5 жыл бұрын
One suggestion is to put a pocket in the back to store it all, so once you are finished with the book it turns into a ring bound folder so you don’t waste anything
@peterwhitcomb8315
5 жыл бұрын
@6:40 "Tents. Tents on fire. That's really important. Players sure do like to set things on fire. Don't they? The universal language of D&D lol. I think they have their marketing phrase.
@kaliek5281
4 жыл бұрын
Just bought this book a few days ago. Eagerly waiting for it to show up! It's perfect for my needs (new campaign, new players, AND NEW TO DMING)
@Moteridgerider
5 жыл бұрын
As someone just about to start out dming, this looks like a cool entry point for terrain and grids. Will check it out on kickstarter.
@awesomemanlikeaboss
5 жыл бұрын
This is an awesome affordable idea! I think this will be the first thing I support on kickstarter! Thank you for the informative video!
@ScrewySquid
5 жыл бұрын
Well once again I didn't even make it through the whole video before I backed the project.
@dustincox9942
5 жыл бұрын
Ok, I remember starting out with D&D. I started looking for inspiration and found your channel. It wasn’t that old, but your builds were (and are still are) awesome! So inspiring. And a product like this would have been great to have available. Also, like you stated, this product is still nice and can be useful. Thumbs up
@Thergood
5 жыл бұрын
Pretty neat. Personally, I'd much prefer to pay a few extra bucks and get a die-cut version where I could just pop everything out.
@mszoomy
5 жыл бұрын
Sometimes that winds up being being a mess though as pieces start coming loose just from you browsing through the pages, but I see what you're thinking. Most of the lines are straight, so get yourself a cheap paper cutter and you can zip right through it
@gilesgardner3456
5 жыл бұрын
Grabbed one of these at ECCC. At my table we just had everyone spend 5 minuets cutting them out while people got drinks etc. The die-cuts end up leaving little bits around the edges and not looking as good. These cut nice & clean and blend seamlessly onto my battle mats. Because it is all straight lines, it went really quick.
@combustible7267
5 жыл бұрын
this looks like it'd be great for kids, too! love how colourful it all is
@perrygrosshans8537
5 жыл бұрын
Very cool stuff, thanks for spotlighting it! I've used printed terrain for years, and still love it to expand my Warhammer Quest boardgame. I could see mixing some of that up with my new 3D terrain, although I'm slowly becoming a 3D Terrain snob, lol! I will definitely check out the Kickstarter though! Oh! And nifty fancy two-camera angles for the video! Oooooooh! :D
@st4lsell123
5 жыл бұрын
Punch everything out till only the ring is left. Then use the ring for crafting some terrain of some kind.
@ericstahmer720
5 жыл бұрын
Sam Jam the ring would make a good “large metal spring” for a funhouse dungeon or puzzle if cut up and painted metallic.
@c.a.mcdivitt9722
5 жыл бұрын
Make one cut, straight down the center, hot glue the pieces back together, and paint it with rust brown- instant giant chain.
@SH-qs7ee
5 жыл бұрын
This seems to be one of those 'so obvious, why didn't I think of it' products. Its a great idea id be tempted to buy 2, just to double up on some of the stuff there (the ship being the most likely one, for when the party is split between decks)
@Fnordathoth
5 жыл бұрын
This looks to be a great product for the price, I'm definitely sold!
@brigittedarcel1498
5 жыл бұрын
If you have a color printer the possibilities are increased several fold :-)
@garniebollingiii341
5 жыл бұрын
Your shelf setup is exactly what I want. Curved perfectly around, filling my entire wall space, and full of tabletop supplies
@mszoomy
5 жыл бұрын
Love it, good that most of it double sided, that was my 1st concern, if you cut something out was it going to ruin the image on the back? But seems they thought that through, also looks like more of the reverse images are related to each other, ie: roof on one side, interior on the other. You could lay out a village with only the roof showing then as your abventurers entire, just flip it over. Or with the tents, you're sound asleep, then Deathwing flies past and torches your camp, flip them over and 🔥 great idea and easy to store in a box or even an expandable folder with tabs, label the tabs terrain, buildings, people etc.
@rpeterson9182
5 жыл бұрын
Or store them in a three-ring binder with clear plastic page protectors for the large pieces, and clear plastic photo holders (2 or 3 per page) for medium pieces. You could also get baseball card holder clear plastic sheets (9 per page) for really little stuff (camp fires, tree stumps, goblins, etc.).
@opey2dope
5 жыл бұрын
Looks like a great option for con games as well. Very portable.
@davidsmith9431
5 жыл бұрын
I've backed this, I plan to keep the books uncut up and PhotoCopy the page I need and cut that up.
@kevinpatrickcarey3741
4 жыл бұрын
i do the same thing with my adult coloring books lol that way if my inspiration changes i can photocopy another image and color it different
@gregmccormack5709
5 жыл бұрын
Man if they can double side the figures so you have the option of standing them up this would be even more sweet! A cool starter set for sure
@JohnSmith-un9fy
5 жыл бұрын
One can never have too many dungeon tiles. It's an addiction. Just like miniatures. More. Must have MORE!!!
@timd4524
3 жыл бұрын
They come in a box now which actually gives you a place to organize the pieces. Waiting right now for this one and Hell and High Water. It's 35 dollars for a boxed set. Apparently the cost difference became not that much of deal. 3d stuff is way too expensive for the amount of use you might get out of it.
@jezeski2011
5 жыл бұрын
Check out Crooked Staff Terrain instead. Same idea, but cheaper.
@desmondladouceur5868
5 жыл бұрын
Reversible tile sets on sturdy,low gloss card stock,on the cheapest spiral binding available,and 1000 units of them to boot? This is why I watch this channel. As a cheapscate warhammer and "homebrew" player,looks really good to add to a campaign drawer/box,for when you want to do some quick skirmishes or encounters.Will be keeping an eye on this product ,and hope your channel reviews lower cost products like this in the future.
@greenquartz
5 жыл бұрын
This looks really cool! I think the only thing I would want added to this would be to have them pre -perforated because, I can cut a decent straight line with a ruler, but I can't cut curved or jagged/uneven lines to save myself! Even with an exacto knife. Lolol
@BlackMagicCraftOfficial
5 жыл бұрын
Perforation would double the cost or more. You don’t have to cut curves. Everything is on a 1” grid.
@tadelong
3 жыл бұрын
Just bought the box they come in now from my flgs. I love this set! I can spend hours just looking at the tiles.
@charlesstinson4957
5 жыл бұрын
If this had a printable pdf option we would be all in. We prefer the 1.25" map scale over the standard 1" scale and would like the option of resizing the images. That aside, that is some great artwork.
@leonard8510
5 жыл бұрын
Scan the pages and then resize/print to your needs. That's what I plan on doing.
@looselycollected7505
5 жыл бұрын
Pretty sure if I bought this, I'd lay pages I wanted use flat in my flatbed scanner. Scan them. And print them out on cardstock and cut them out. Keep the book nice and clean so I could use it over and over throw away the copies I made when they got too ratty to use and make more when needed.
@MonkeyJedi99
5 жыл бұрын
I would do that also.
@1jugglethis
5 жыл бұрын
Very cool! For the on-the-go GM, these are awesome. Stuff these into a backpack, hop on the bus, and build a full-fledged gaming mat at your friend's house or gaming club. Convenient, durable, and well executed. Nice addition to the hobby.
@jensgylling
4 жыл бұрын
I've got the 2E that comes in a box, very nice product. I've noticed when you flip the houses over, the chimney changes side from one to the other, but that's about the only thing I could find and that probably doesn't matter unless some char stand holding a rope and another us that rope to enter via the chimney, and then we all have to move to align when we flip the house ^^
@janetcameron4652
5 жыл бұрын
Check out Crooked Staff Terrain. He has alot of this type of terrain alot cheeper.
@jezeski2011
5 жыл бұрын
Totally agree
@katthudson9131
5 жыл бұрын
I would never cut it out, I would copy and print out another version for use, and keep the book pristine for later copies.
@rzbonilla
5 жыл бұрын
A book form tiles would have 0 taxes when imported to Brazil. Well done.
@HQDungeons
5 жыл бұрын
for me that would be a book of inspiration, to build 3D parts
@Sketchkat
5 жыл бұрын
Same While I was watching as soon as I saw the “rune” I thought “Could hotglue gun a design onto parchment/baking paper and paint it all sorts of colours”
@JB-ym4up
5 жыл бұрын
Under 3 cents per piece sounds like a great deal.
@robertnemeth5659
5 жыл бұрын
Geek Tank Games had a recent KS similar to this for tabletop tokens, although as separate sheets that come in their own themed, resealable bag (e.g., dungeon set or rooftops). They were more expensive but die cut saving lots of time. I got them especially for running at cons. Only downside is that they’re glossy so will be hard to stay put on a glossy battlemat like a Pathfinder FlipMat or D&D Adventure Grid. Will likely use a removable glue square/dot to hold them in place.
@juliehamel8330
5 жыл бұрын
My brother in-law started playing again after many years. He only has the books and plays on pieces of paper. I know what I'm getting him for Christmas
@jezeski2011
5 жыл бұрын
Check out Crooked Staff Terrain instead. Same idea, but cheaper.
@Thornspyre81
4 жыл бұрын
Just ordered mine today and cant wait to get it!
@cha0sunity
5 жыл бұрын
I backed this. I have a few terrain things I've built, but having to move it to where we play is a hassle. This has way more options. No brainier on this!
@baker7280
5 жыл бұрын
It would be super cool if the tiles were laminated or something like that so you could use a dry erase marker on them. I don’t know how much more it would cost though, might not be worth it.
@Jimalcoatl
5 жыл бұрын
A simple office laminator is pretty cheap, so you could laminate them yourself.
@bboeckman
5 жыл бұрын
For only $30 bucks this seems like a no brainer!
@juliantaylor7663
2 жыл бұрын
I’d love to see a Loke battle mats vs dungeon craft video cause they both have similar products not exactly the same but similar
@marshall104
5 жыл бұрын
Here's an idea: use a few pages from this and then use the scraps from those pages and the spiral binding and see if you can make anything with it.
@anthonybernardo2214
5 жыл бұрын
I agree with other commenters: I feel like I would buy this and just make cardstock photocopies of the pages to put on foam core(or just leave them on the cardstock!). That way you don't have to cut out the pages.
@asyourgm
5 жыл бұрын
At first I didn't like that each page had a matching theme on both sides, because it means you can't use an entire dungeon set, or outdoor set, or town set without having some of the potential features face down. But while the idea of a vast labyrinth is appealing, I find that smaller dungeons with unique challenge encounters play better.
@StarshipsSteel
5 жыл бұрын
Ooo FANCY! Multiple camera angles!
@patientzerogms
5 жыл бұрын
you can scan and print the parts you need and cut them, and leave the book untouched :)
@adondriel
5 жыл бұрын
That defeats the purpose of printing it on card stock.
@patientzerogms
5 жыл бұрын
@@adondriel you can scan and then print on cardstock, too.. not everyone might want to do this, but this is an option if you want to keep the original book untouched or need multiple copies of a tile
@JimmiWazEre
5 жыл бұрын
You can do that with images from the internet and save yourself 30 dollars... Which is what I'd advocate if you wanted 2d terrain
@jacobhope6164
5 жыл бұрын
Was that a DM Scotty orc tent I saw on the shelf behind you?
@BlackMagicCraftOfficial
5 жыл бұрын
Yup. One of the first things I ever made.
@TheGameSmithsTable
5 жыл бұрын
A great product for new players and GMs!
@carlmayne3519
5 жыл бұрын
I saw somerthing like this years ago and got a little confused thinking this was that old product - Just incase you've not heard of it drivethrurpg has ton's of this stuff ;)
@MonkeyJedi99
5 жыл бұрын
I have used some of their "Paper Make-it!" stuff in my sci-fi campaign.
@ianshaliczer
5 жыл бұрын
If I’ve got to cut them out myself, what advantage does this offer me over the thousands of PDF format tiles and templates one the market? Those kits usually cost under $10 USD and I can print a nearly infinite amount of them (so long as I have ink in my printer).
@Pe0ads
5 жыл бұрын
ISH High quality cardstock, and you don’t need to print them out. High quality print so no bleed and edge to edge printing.
@warrior921994
5 жыл бұрын
I'd love to see the Stone Bridge (Ep. 75/76) V2 as a how to ^^
@Akeche
5 жыл бұрын
My main issue is that I wish the pieces were perforated, or it was some kind of stretch goal for their Kickstarter.
@rpeterson9182
5 жыл бұрын
On their kickstarter FAQ they state that making the pieces perforated would have doubled the cost of the book. So apparently they looked into perforation, but decided against it as it defeated the main purpose of the book: low cost entry into RPGs. I don't blame them. Core books for D&D are $50 each and there are three. :P
@The_Sharktocrab
4 жыл бұрын
@@rpeterson9182 yeah no joke, last thing d&d needs is more expensive books lol
@lern2swim
5 жыл бұрын
Why does it seem like it's not designed so both sides will be usable once pieces are cut out? Seems like they could have laid out and sized things so you didn't have to destroy one side. Or were there just double pages being flipped at times, making it look like the sides didn't match?
@BlackMagicCraftOfficial
5 жыл бұрын
All cut outs line up front to back and are double sided. You don’t ruin anything.
@lern2swim
5 жыл бұрын
@@BlackMagicCraftOfficial OK. There were a bunch of flips where it looked like they didn't. You were obviously flipping multiple pages at a time in hindsight. Thanks for the info.
@lewisharris3400
5 жыл бұрын
This would be a perfect present for my brother. Hopefully it will become available in the UK before December :)
@xraydeadgirl
5 жыл бұрын
You just lit my mind on FIRE!
@BenRK90
5 жыл бұрын
Yes please!
@AlexBabcock-hw9iz
5 жыл бұрын
FIRST!!! lol Hey when you finish the book the wire binding could be used to craft a stills cooling coils to full up all those barrels.
@jezeski2011
5 жыл бұрын
It's not a race. That means nobody else cares if you think you are first, second or w/e. At least you included a comment that actually has something to do with the video, rather than just the "first" nonsense that nobody cares about. Also, You were not first. There is a cool feature of KZitem that allows a person to view comments newest first. If you scroll to the very bottom, the last one is the oldest (first) comment.
@AlexBabcock-hw9iz
5 жыл бұрын
@@jezeski2011 Ummm actually I was no where near first I was just goofing on some one who did that exact same thing just put up the word first. Sorry for any confusion this may have caused you next time I'll do a little disclaimer at the bottom of my comment. But thanks for taking the time to share your thoughts on the subject.
@zachnattrass
5 жыл бұрын
You can take it to the library and photo copy the pieces you want to use and keep the book intact.
@evilontoast7266
5 жыл бұрын
My only wish is I could take out the pages photocopy them then put them back in. Or atleast it was easier to just pop them out
@chriscongemi2109
5 жыл бұрын
If you have a printer with a scanner. Plop down what you want on the scanner print on some heavier weight paper and cut out. You could even take some glue stick and put the paper on cereal box cardboard. The gift that keeps on giving..... lol
@jezeski2011
5 жыл бұрын
Check out Crooked Staff Terrain instead. Same idea, but cheaper.
@phredbookley183
15 күн бұрын
Do you POP them out or do you CUT them out? I'd be instantly sold if they popped out like tokens.
@ObsidianDragon616
5 жыл бұрын
I would recommend a ring-binder and a photocopier.
@sickelej3620
5 жыл бұрын
it doesnt ship to my country, but i reaaalllyy want it ;-;
@xraydeadgirl
5 жыл бұрын
DIY
@mszoomy
5 жыл бұрын
Find a friend who will ship it to you
@hypersapien
5 жыл бұрын
Cool idea. I'd buy one if I was in the market for that kind of thing.
@danielramsey6141
4 жыл бұрын
You know...you can possibly Print this Stuff out by scanning the pages onto Cardstock Copies and making it much easier to use rather than cutting out these in their double-sided forms.
@timjacobs9543
5 жыл бұрын
Reminds me on Zelda and Grandia
@dford4014
5 жыл бұрын
A lot of that card stock could be used ala Wyloch.
@macewen1
5 жыл бұрын
So if you like card stock terrain (i love the stuff) you should check out the Card Board Warriors forum cardboard-warriors.proboards.com/ for tons of info on printing and building and an amazing resource for free tiles, models and figures. Also cruise DriveThruRPG and look up creators like Okumarts, Dave Graffem Models, Heroic Maps, and maybe a dozen more that I think highly of. For the price of this book you can score a lot more content. The down side about double sided maps is you can't glue them to a base material to make them more substantial, print and play content is way more versatile in that you get what you want instead of an assortment of things you may not use. Cool book, but if you are going to delve into cardstock terrain you should check out the plethora of options that have been around for a while.
@Mailed-Knight
5 жыл бұрын
Very cool.
@magistar2243
5 жыл бұрын
Very nifty! Have you filmed a session with your friends? I think that would be fun to watch.
@theconstantcommenter683
3 жыл бұрын
This is so cool
@Jeffs40K
5 жыл бұрын
Very cool
@dford4014
5 жыл бұрын
Could use it as a list of 3d terrain to build
@whilehobbying
5 жыл бұрын
Looks neat! A shame they have such a limited release for it..
@BlackMagicCraftOfficial
5 жыл бұрын
Not sure what you mean.
@whilehobbying
5 жыл бұрын
They only ship to US, UK, CAN, GER, and AUS.
@Heroes_of_Qalanor_RPG
5 жыл бұрын
I prefer the cartoon style dungeon tiles like this
@mickphillips6735
5 жыл бұрын
Bit off topic noticed you had phantom of the opera figure in background you got any more aurora ,polar lights type figures I have the same one
@BlackMagicCraftOfficial
5 жыл бұрын
I made and collected a lot of horror models/toys when I was younger but this is the only one I still have.
@mickphillips6735
5 жыл бұрын
Wish I still had mine from when I was younger had most of the glow in the dark aurora monster kits good to see the old monster kits
@francescospuntarelli7369
5 жыл бұрын
Good price for such a work
@prezzeruk4054
5 жыл бұрын
Can anyone advise me? Iam very interested in d and d, more on the building story telling side of it. I used to play warhammer and 40k, necromunda etc in my youth. Iam 48 now. Iam a video gamer, occasional nowadays, but looking to maybe phase it out or really cut down so i can get back into board wargaming. So just need a place to start with dnd. Dont want to spend a fortune yet, hoping theres like a starter set i can get, then add to. Planning to make alot of my own scenery etc. So any advice please, thankyou.
@claytonleal7947
5 жыл бұрын
seems cool, i just wish the shipping to Canada wasn't 2/3 the price of the product.
@dford4014
5 жыл бұрын
Really, that sucks, once again takin' it from the man!
@kenhouston814
5 жыл бұрын
So in the background on the shelf when you were first talking I saw what looked like a pavilion tent of some kind. How did you make that?
@twitchster77
7 ай бұрын
I absolutely hate that once you cut out one side of a page, it cuts through the images on the back of that page. Not sure if that makes sense.
@BlackMagicCraftOfficial
7 ай бұрын
It’s not like that.
@stevenalexander9644
5 жыл бұрын
use the book ring for a craft, could be a ring of barbed wire with a little work
@dinosaurjr86
5 жыл бұрын
to help save the planet and not be wasteful, make an awesome craft out of the spiral binding!
@Intro2Love
5 жыл бұрын
really cool book👍
@lml1501
5 жыл бұрын
new idea. start crafting the scenes in the book, and make miniatures versions of the cut outs
@PurrrDLyte
5 жыл бұрын
be better if they were white board pen ready
@Kalumniatoris
5 жыл бұрын
I think it would be better if both decks of a ship were on separate pieces instead. One could then manage action there better. When you count shipping it's starting to get rather expensive, shipping to only few countries anyway so if I'd like to have it I would probably have to at least double the price. Anyway good luck to them.
@stupidtwo
5 жыл бұрын
Cool project. Not for everybody at that price point, I’d say. If they’re looking to compete with Dungeon Tiles, I’d at least halve the size of the final product and restrict the “issues” to specific themes so the price point could be lower. Side note: The second camera angle isn’t working for ya, man. We’re cool with looking straight at yer mug. 😄
@ShadowDrakken
5 жыл бұрын
Having worked in the printing industry, I really worry about how well this will work. Getting double sided cutouts properly justified isn't easy, that's why playing cards always have borders to hide the slop.
@ShadowDrakken
5 жыл бұрын
And something to note in this regard; small runs are easier to ensure justification on than longer runs. The longer the run, the more slipping builds up over time, and the less likely issues are to be caught by QC.
@alexmorton5867
5 жыл бұрын
Woah. What’s up with that janky second camera angle
@ScratchBashing
5 жыл бұрын
He's getting ready to show off his right arm full sleeve! (WIP)
@WilliamKuby
5 жыл бұрын
looks good me i xirox the stuff and make more what i need got my printer or bring to stapels and ues thare or the yes liberry thats my take on it see as post
@goofydragon8023
5 жыл бұрын
Are the tiles dry erase marker safe? That's important to me as a DM I am always drawing on my battle mats
Пікірлер: 192