I called BPI about my CVA Accura muzzleloader’s sticky stock. They asked me to email them pictures of the stock so they could match the camo pattern and would send me a new one. It was just that easy.
@floridagunrat1625
Жыл бұрын
Thanks for your video. I haven't shot my x-bolt in a year and I just pulled it out this afternoon. I found the stock was melting! Honestly, I don't want Browning to put another stock on it so that in 4 to 5 years, when it happens again, they can say the gun is too old and there's no warranty. There is no excuse for Browning to have the gun for 4 months just to replace the stock. It would be nice if they offered the option of one of their other factory stocks, even if it was an extra cost upgrade. They could also offer like a $150 coupon that the owner could use towards the purchase of an aftermarket stock. I generally don't like plastic stocks, but this Browning was an exception. I already have about a half dozen rifles that I have upgraded to boys laminate stocks, but I had no plans to do that to this Browning. I guess I'll have to contact them and see what happens!
@faxonmclaughlin9993
6 ай бұрын
The stocks they're replacing are not duratouch stocks. They are like the new manufactuer xbolt stocks
@timothybartin7553
Ай бұрын
The second rifle is a CVA with a Bergara barrel. CVA is very accommodating, but they replace it with the same stocks. They send new stocks with dura coat. It's a terrible product. I had browning replace a shotgun stock with that coating with a stock that doesn't have that product on the gun. BPI outdoors / CVA doesn't have options without that for the Apex. Frustrating!
@ianstinson8423
2 жыл бұрын
Thank you for posting about this. My BPS has the same problem and I can't seem to clean this gunk off.
@megmoore8913
Жыл бұрын
Currently having the same issue with my BPS.
@TigerSwanInc
3 жыл бұрын
Love watching this channel grow, a+ content
@maverickgunworks8777
3 жыл бұрын
Thank you glad you are a part of this community!
@JAEUFM
2 жыл бұрын
I went with the simplest solution I could come up. I camo taped the stock. Works fine for me so far.
@ExF1Guy
Жыл бұрын
At least with soft touch rubberized coatings (I think the same as duratouch), there are several videos on KZitem showing that it can be fixed with isopropyl alcohol and a rag.
@DMX-PAT
2 жыл бұрын
CVA makes the Apex, Bergara only makes the barrels. Thanks for the video, good to know just how crap these manufacturers have become.
@lsdt01
2 жыл бұрын
My 10g Gold had the same problem but here in the UK Browning will not, would not help. (The last Browning I'll buy) I tried a couple of the KZitem recommended methods of removing the coating without much success. The fowling season was due to start and to reduce the stickiness I covered the stock and forend in talcum powder and put it back in to the cabinet. Weeks later when I came to use the gun I found the talc had completely absorbed into the coating and the stickiness gone?
@jimbrown2604
Жыл бұрын
I just discovered this with my ~10 yr old Browning A5. It was awful. I KZitemd and discovered this sticky residue was an issue w dura touch. Browning is pretty cool about fixing this but I hate to lose my gun for any extended period or worse have them replace the stock and then I can’t shoot it as well as now. I mean, I just had my best dove hunt ever. So I took some denatured alcohol and went to work. Gun stock and forearm feel gum free now and camo was not affected…so unless gum reappears, I’m set to hunt with my slicker shotgun. Love Browning and my A5.
@bjbeagles9119
2 жыл бұрын
I have a Browning Maxus I sending back now right at Hunting season good I have more Guns...good video...BJ
@reesegurley7183
2 жыл бұрын
Did you ever get it back, if so how long was the process?
@JimmyDickens1
Жыл бұрын
I have the same problem with my browning maxus. How did browning rectify the situation?
@apstech4618
3 жыл бұрын
FF to 1:28. You can contact Browning and they will replace it with the same exact fly-paper problem dura-touch finish. How is that even a solution?
@Sicktrickintuner
2 жыл бұрын
No they didn’t, it’s just a plain camo, like original and no duratouch
@bustthafizz9
2 жыл бұрын
Does browning replace the stock with another dura touch stock or a different type of synthetic stock?
@maverickgunworks8777
2 жыл бұрын
For most they will sand blast the stock and put a different coating on it.
@justinseeton5240
2 жыл бұрын
@@maverickgunworks8777 so now they are okay to buy without issues? I was looking at the browning maxus 2 but I dont wanna deal with that sticky finish.
@ashirley23
Жыл бұрын
@Maverick Gunworks if yours is a max 4 camo can you request another?
@ashirley23
Жыл бұрын
Such as bottomlands or timber
@robwaters8153
Жыл бұрын
@ashirley23 I just asked browning canada and they said they can but at a extra cost about 150
@gabimarie8
Жыл бұрын
This is happening to my Browning Maxus Shotgun
@gizliliman1
Жыл бұрын
mine too,13 year old maxus
@mechanicalman1068
Жыл бұрын
I have an x-Bolt. It was fine after last season. Didn’t make it out this year and just took it out to put it in a new safe. Feels like fly paper. Send it back and wait 4 months! BS! The old stock is trash. Send me another stock and I’ll change it myself.
@markstephens5120
Жыл бұрын
I was not willing to send my rifle back to browning and they would not send me a stock. I used denatured alcohol and cotton swabs and it removed all the sticky shit, washed it with dawn dish soap after and it's like a new stock.
@mechanicalman1068
Жыл бұрын
@@markstephens5120 tried that. A couple times. Didn’t work for me. Whatever, while I don’t love the idea of sending it back, I did and I’ll get it back before I need it next season.
@dustinriddell8374
Ай бұрын
Having this problem
@jimthomas5106
Жыл бұрын
This should be issued as a recall. Nothing more nothing less. Manufacturer's defect. Pay good money for gun and you have to go through this.
@BWebb
2 ай бұрын
It is, they lost a class action lawsuit and they have to fix it.
@rudorc
Ай бұрын
Just sent back my Winchester SuperX 3
@BWebb
Ай бұрын
@@rudorcyep! They have my browning maxus right now.
@rudorc
Ай бұрын
@@BWebb any idea when you’ll get yours back? I hope to get mine before the dove opener
@BWebb
Ай бұрын
@@rudorc Nope, mine is in level 3 right now. I'm hoping it gets done fast as well.
@randallsoileau
Жыл бұрын
Acetone will remove it.
@vincebarnett5964
Ай бұрын
Awesome
@joeparker7508
Жыл бұрын
My Browning A5 is a gummy mess
@michaelhollier
2 жыл бұрын
My recoil pad fell apart on 12 ga A5
@barrettmills856
10 ай бұрын
Mine did too and ccoating completely gummed the gun was near useless waiting to get mine back from sending it in to browning
Пікірлер: 46