We would love to see a followup to see how the coating held up this past 5 years!
@alldamagenocontrol9371
9 жыл бұрын
I have seen both guns in person for those looking to use this product it is fantastic! Can't wait to do a couple of older guns I have!
@sonnybedez7040
5 жыл бұрын
Alldamagenocontrol thanks for the info brother
@jmich9369
6 жыл бұрын
Duracoat says to apply light coats untill about 75% coated. On final coat apply a heavier full wet coat because the final coat is what the gun finish will look like. That is why you have 2 different finishes. They say to lay anfinal thick wet coat to get gloss.
@nortcan
9 жыл бұрын
Nice video. You did a great job on those arms. Bravo.Thanks for sharing.
@gandolfthewhite
5 жыл бұрын
Midway has matte blue/black DuraBlue. Good for some military weapons like used in WW1.
@jorgeruiz269
5 жыл бұрын
So its just paint that looks like blue?
@mandog.9687
6 жыл бұрын
You did great the weapons came out good and nice looking keep up the good work.
@annapolismike
5 жыл бұрын
Thanks for the video. To take your time and money to give us "how to" is appreciated.
@BuildBreakFix
8 жыл бұрын
LOL I love the use of the car bumper as hanging rack.. Get r done!
@danmidkiff5416
4 жыл бұрын
You gotta do what you gotta do!!!
@MiBurnout
4 жыл бұрын
How does it look now 5 years later?
@toddy2519
9 жыл бұрын
Why go to all the trouble of cleaning and painting and not take it apart completely so everything is coated and protected??
@robertbrandywine
4 жыл бұрын
Would the changed size prevent reassembly?
@kennethrosbury2819
7 жыл бұрын
the black looks really nice on the 30-30 and the blue looks nice also on the 410 but the black maybe you sprayed it to light and didn't lay down a heavy enough coat but it still looks good I like it
@GC_Rallo
6 жыл бұрын
That's what I'm thinking. I'm not sure when DuraCoat changed the DuraBlue formula, but at some point they were able to extend the shelf-life of the can(after mixing the hardener that is) from 48 hours to 2 weeks, so maybe he was using the old formula and that day or so he left it out could've altered the color a bit. On top of that, I believe the recommended process from DuraCoat is to put several(the number 7 comes to mind, may be wrong though) very light layers on, and then for the final layer you put on a significantly larger amount. I'm guessing that the video creator just did 3 light layers which could be why it came out much thinner/less glossy.
@GC_Rallo
6 жыл бұрын
Nice job! those are some nice looking firearms. I plan on grabbing a can of DuraBlue to refinish a surplus Beretta 92S that I picked up a while back. It was an Italian police trade-in and was made somewhere in the mid to late 70s, at that point in time I believe all the Beretta pistols were actually made in Italy(they are primarily produced here now afaik) and back then they used a more traditional, glossy blue finish on the slide with a solid but glossy black finish on the frame. I really want to recreate that same color-scheme and have the slide be a dark blue and the barrel/frame a solid black, but I'm having trouble deciding which of the DuraBlue colors to go with, I'm worried that the solid blue may be a bit too "battleship gray" and not look like real bluing. If any of you have some experience with DuraBlue, I could really use a suggestion on which of the three to go with. I already know the frame and barrel will be the black, but I'm not sure if I should go with the blue or the blue-black for the slide.
@wild8757
4 жыл бұрын
Don’t know why you didn’t take it apart and take out the trigger group, you put the Dura blue right over the top of the screws on the outside, good luck ever getting them out if you ever have to get inside and take out the trigger group for repair or cleaning
@painterpow9494
9 жыл бұрын
cant wait to try this product have a view rifles that need reblueing
@alanwade445
9 жыл бұрын
i just received my Dura blue for my Ruger single six now i am worried it want have that gloss kook i got the black .
@gandolfthewhite
5 жыл бұрын
Why not walnut shell or fine aluminum oxide sand blast booth to remove rust?
@donniem6191
3 жыл бұрын
How has it held up?
@JDMorris81
4 жыл бұрын
If i don't have anywhere to hang it should I just lay it down and do one side at a time
@timhatchett7048
Жыл бұрын
I like the 30/30 the best
@TheFirefox8192
8 жыл бұрын
could heat speed up the curing time, using a heat gun; Could lead solder be use to fill in pitting ASAP!
@islandprepper5194
8 жыл бұрын
im not sure it would if it doesn't dry even it will come out wavy
@toddy2519
8 жыл бұрын
Mr Lauer, owner of the company, demonstrated the new DuraBlue and used a heat gun to just get the solvents to flash...then sprayed on another coat...then repeated the process. He also mentioned it could be heated in an oven and gave the times with the temperatures.
@sahilkhankhan521
5 жыл бұрын
its aplly only on bluing guns... or without bluing guns also be aplly..
@jamesjordan3239
2 жыл бұрын
I changed my mind....was going to use on my S&W 38 special but after seeing the way yours turned out I think I'll try cold bluing....my opinion the 410 looks like you jus used Krylon spray paint from homedepot....Thanks for the Video though bro!
@movieman64992
4 жыл бұрын
What kind of shotgun is the .410? Does it happen to be an H&R?
@ChiTownVillian88
9 жыл бұрын
So how has it been holding? I used a semi gloss black on my ak. Some places are holding better than others I guess I could have done a better prep job. I was thinking about using the durablue on my 1911. the semi gloss was ok but I want my 1911 to really shine. Would this be the product to use. I was thinking of getting my 1911 nickel plated but I might just go this route and save a lot more money.
@islandprepper5194
9 жыл бұрын
J Munoz it is holding up great. it will leave a deep blue glossy coating on it. but you have to clean it very well before coating your parts.
@islandprepper5194
9 жыл бұрын
i spent about 40 bucks or so on it
@fuzzynutkila1
8 жыл бұрын
Nice Job!
@mrvince9331
8 жыл бұрын
I spent a lot money on this product and I am not impressed by it. I spent all the time prepping it according to the direcctions. after 6 weeks the stuff continues to chip.
@morriszachrisson8359
7 жыл бұрын
But what if I just want to coat a little area on the barrel (ca 5mm round worn off dot)? I do not want to durablue the whole barrel. Would it work? If I maybe take a bit cloth and spray on it and they wipe that dot with it, would it work?
@jmich9369
6 жыл бұрын
Morris Zachrisson I would use Brownells oxpho blue for something like that. Why not just scuff it with a scotchbrite spray with cleaner and do a complete new finish?
@landrun89
7 жыл бұрын
How is it holding up, would you use it again.
@islandprepper5194
7 жыл бұрын
landrun89 yes I would it's holding up great. I have had no problems with it.
@landrun89
7 жыл бұрын
Thanks, gonna try it on a mauser, that was a custom build in the eîghties but needs reblued. Go pokes!!
@chrislivingston2036
9 жыл бұрын
thats some cool stuff, how much a can?
@ScottAT
4 жыл бұрын
Why didn’t you disassemble the Rifle completely? You have un coated spots. It’s like taking a shower and not wiping your ass....
@HL-ll4zz
5 жыл бұрын
Hows it holding up?
@islandprepper5194
5 жыл бұрын
It is doing good I haven't had any problems out of it and it still looks great to be honest
@HL-ll4zz
5 жыл бұрын
@@islandprepper5194 nice!! So no scratches or paint chipping off? Peeling? None of that?
@svborek
5 жыл бұрын
Fire and oil the old fashion way
@frankcabrera6319
4 жыл бұрын
Intrested in doing a shotgun barrel
@wrathroc
2 жыл бұрын
Dura-lube. Oookkkay
@paulgarcia8909
4 жыл бұрын
Its Not a gun blue its a paint lol
@J-Ball
6 жыл бұрын
They got people spray painting their damn guns haha! Genius sell point for a desperate market.
Пікірлер: 50