A quick DuraCoat project demonstrating easy application of this user friendly and incredibly durable two-part finish. This project shows application of DuraCoat to a painter's pole antenna mount for portable emergency / portable HAM radio operations.
Prepping the project is the most important step of any finishing project. This antenna mount is built from CPVC plastic and stainless steel. Prior to applying the DuraCoat finish, this project was lightly sanded with 400 grit wet-dry sandpaper and cleaned with acetone.
The two-part DuraCoat finish is applied in layers allowing the solvents to flash off before recoating that area. Best application is with an airbrush. However, very acceptable results can also be achieved with careful use of an inexpensive Preval Srayer.
DuraCoat is dry to touch in 20 minutes, dry for handling in 60 minutes, dry for reassembly and regular service use in 24 hours and reaches full cure in 30 days.
DuraCoat finishes and additives, complete DuraCoat finishing kits, airbrush kits, and finishing accessories can be ordered directly online from Lauer Custom Weaponry.
LAUER CUSTOM WEAPONRY
www.lauerweapon...
DuraCoat Tactical Colors
www.lauerweapon...
DuraCoat EZ Finishing Kit
www.lauerweapon...
DuraCoat EZ Finishing Kit on KZitem
• DuraCoat EZ Finishing ...
Houts Enterprises LLC
www.duracoat-fi...
Paasche Airbrush
www.paascheairb...
Fuji HVLP Spray Systems
www.phelpsrefin...
Негізгі бет DuraCoat Made Simple
Пікірлер: 102