To power the DVR from the on-Board power on Audi A6C6 need to buy
1) contact VAG N90732703 bought from an authorized dealer parts.skoda-av...
2) fuse rated 5A and below
3) the cigarette lighter plug bought here bi-bi.ru/produ...
4) cable clamp terminal with bolt
=====================
Tools required sockets 8, 10, and 13
In order to remove the glove box, you need to Unscrew 3 bolts from the top and 2 from the bottom, it is not necessary to disconnect the contacts
During operation, disconnect the negative terminal of the battery with the end head or key 13, do not close the trunk
To remove the skin of the rack-it must first pull on itself, snap 3 clips along the entire length, then it must be pulled up towards the ceiling.
=====================
Connected to the pad in beige fuses, it is supplied with 12V power only when the ignition is on. If you need constant power - connect to the black.
=====================
For Audi A4 B8, you can do the same, an example of disassembly of fuse pads in this video • Установка bluetooth Au...
=====================
Overview Yi Smart DVR Dash Camera • Xiaomi Yi Dash Camera ...
=====================
Blog on DRIVE2 www.drive2.com...
Негізгі бет DVR connecting Audi A6 C6 to the standard wiring through a fuse
No video
Пікірлер: 54