Nice video. I have my own fancy door blocks with sizes and flip controls. The problem with using wipeouts is that certain methods of printing will print them all solid black, so you'll have these huge black squares where all the doors are.
@jacksonstrong4190
11 жыл бұрын
I followed your instructions to a T and it worked perfectly! That never happens.... thank you. Great tutorial
@samyyoussef8380
6 жыл бұрын
Outstanding, simple and straightforward, it works like in Revit, thank you man.
@ThaoLe-wz3xo
8 жыл бұрын
THANKS A LOT. IT'S MAKE MY WORK FASTER AND EFFICENCY WHAT A AWESOME TUTORIAL !
@Alwoc21
7 жыл бұрын
great video. easy to understand.
@antonycpr
12 жыл бұрын
Excellent AutoCAD tutorials could you make some more please
@samyyoussef8380
6 жыл бұрын
Best ever done for that subject, thanks a lot
@TRUSS3D
11 жыл бұрын
Thanks for the comments. Glad I could help.
@micotic
9 жыл бұрын
Great job Bravoooo
@Bdurrant1966
9 жыл бұрын
Great job teaching this confusing concept!! Thanks
@caseybarber1177
11 жыл бұрын
hello, i was experiencing the same problem as you encountered. My solution was to set a coincident constraint where the swing of the arch meets the end of the door panel. That will allow it to stay attached to the frame. If you have any other questions let me know. I hope that helps.
@GUSXSAVI
11 жыл бұрын
BUENA CAMPEÓN! great work!
@Euphoric_R
10 жыл бұрын
Omg this was so hard before I watched the video. Now it's so easy!
@engebe6536
Жыл бұрын
nice, thanks for this video
@hvacworkshop4791
10 жыл бұрын
Thanks, Just followed and it worked well with AutoCAD MEP
@farhanmanji1231
7 жыл бұрын
Greatly helpful. Do you perhaps know how to create a dynamic block for sliding doors? I have tried and tried but cant seem to get the doors to stretch equally in the one direction.
@fabiotrombetta1302
7 жыл бұрын
Congratulations, very good tutorial thanks thanks thanks
@matthiasraukas4772
5 жыл бұрын
love it
@billystang5360
7 жыл бұрын
Thomas this is such a great video! Do you get notifications on these comments? Paul and I have had more than one discussion on this tutorial.
@thearchitectworld
10 жыл бұрын
Thankx a lot bro... Looking for this from so long time...
@darthD1305
7 жыл бұрын
thomas, couldnt thank you enough for how informative and crystal your video is. however, they're a bit different setting from your to mine to get the same effect.but it works well. now, i wonder if you could help me w/ how to do double swing door. i followed ur isntruction step by step but im kinda stuck on strecth parameter on step 3. i've changed the angle and try each different angle but it still wont work. any suggestion? really need your maestro advice
@tommillman6173
10 жыл бұрын
I like the pace of the flick. One item left for me...the wipeout does not seem to stay effective on hatch patterns. Is that normal?
@bhogalsimranjeet
11 жыл бұрын
Geat tutorial !!1 Thanks . However, when i try to attempt the same, the door swing doesnt remain attached to the frame and the door shutter when i stretch the block. Kindly suggest.
@MrDonnyHalim
11 жыл бұрын
i also apply flip action on the door, how to make the flip left to right work with the door after i change the scale of the door? up to down / down to up work just fine
@rajeshgp5777
10 жыл бұрын
great explanation , thanks thomas , it works
@ilovejingle
8 жыл бұрын
great video!
@marianafayez
8 жыл бұрын
it is an amazing video and very clear, but I need to know how to change the angle of the opening door, for example if I need it to open 45 degree not 90dgree, what should I do?
@caseybarber1177
11 жыл бұрын
Hello, I followed your tutorial and I had encountered a problem; the door panel not staying attached to the arch of the door swing. It was scaling in the opposite direction. Do you have any thoughts on what could be happening? Thank you
@МарияМихайлова-ю4ф
6 жыл бұрын
Hello! I have the same problem as you. Did you find answer on your problem?
@tm9832
6 жыл бұрын
Great video. Can you show us how to do a double door dynamic block? I am really struggling to get that one right.
@THinleyDhendupTopper
4 жыл бұрын
ME TOO
@Werkea
8 жыл бұрын
great help
@SebaQuiros
6 жыл бұрын
I´m trying to do the same but controlling the total width (including the frames) and the arc doest scale correctly even though I overrided the base point in the scale action associated with the linear parameter. Could you please help me?
@mcruzatt
10 жыл бұрын
Thanks man!!
@qiiven6176
10 жыл бұрын
Hi, Thomas, When I clik the Linear, and DONE select those two point, I can't see the arrows. could you tell me why? and How to make it Visible.
@dulceriosbisuteria
9 жыл бұрын
thanks
@wasiahmad3401
Жыл бұрын
Why you people using a simple door? Why not using a professional door with handle and different material?
Пікірлер: 40