Three Amigos… Cole has really won me over in these past several blogs. He’s loosened up since the very first time we met him last year. Good vibes between the three of you. Keep it up.
@THRASHIN
6 ай бұрын
Thanks brother!!!
@supercarspecifics
6 ай бұрын
little drag strip tip for the lights, when you do the standard psortmen lights as soon as the last yellow goes out hit the throttle it will allow you to smash throttle as it its turning green instead of waiting for it to go green then taking off without red lighting, so as soon as the last yellow goes out hit the throttle, not before the yellow as you will red light , but when the last yellow light goes out hit it
@daddydiesel5889
6 ай бұрын
👍🏻
@corymoore384
6 ай бұрын
Awesome content! To make life easier. You don’t have to remove the exhaust. If you remove the rear shocks you can skip the exhaust. Makes life a lot easier and faster. Then you just use the jack to raise or lower the bike to line up the axle. Keep up the great work!!!!
@THRASHIN
6 ай бұрын
Thanks for the info!
@dinkydotzero
6 ай бұрын
THRASHIN Driveway and patio cleaning, When this Harley thing falls through its good to have a backup career
@THRASHIN
6 ай бұрын
True!
@jeffkinsey3801
6 ай бұрын
You should spray those brake pistons with brake cleaner and air before pushing them into the caliper bore. You don't want the brake dust to get past the piston seals.
@mrdrivebytrucker
2 ай бұрын
So funny to see your rear brakes. We can down 101 from the Bay Area to Born Free this year. We were in your neighborhood and I completely lost my back brakes. They were paper thin just like yours
@anthonygreco1130
6 ай бұрын
Once again, an excellent vlog with educational content thrown in from Allen. Much appreciate his knowledge and input on tuning. Think about being in a Tuning class with Allen as the instructor! Total involvement 💯%. Tire mounting and balancing is a bonus !! Thank you for sharing this experience!!
@THRASHIN
6 ай бұрын
Glad you enjoyed it! Thanks for watching!
@Sepulveda542
6 ай бұрын
Juan and Cole up to no good, pulling a fast one on the boss! Let’s find out Thursday! T⚡️C
@Macx912
6 ай бұрын
Watched the “Ask me a question” with Lance and Cole from 12 years ago. Glad you guys are still friends and working together…….funny you guys have not changed that much.
@THRASHIN
6 ай бұрын
Haha!!! So good
@alanholcomb7285
6 ай бұрын
Thanks again for letting us know about Irwindale
@masonhammond8536
6 ай бұрын
That “road trippin” shirt is sick! Definitely gonna need that.
@locoocho2415
6 ай бұрын
Can't wait for the race..... Thrasin Supply Rocks
@Arizndn21
6 ай бұрын
I'm looking forward to seeing you guys in Az bike week
@THRASHIN
6 ай бұрын
Us too! Come say whats up!
@RoderickCross
6 ай бұрын
I installed that alloy art cush drive and you can definitely feel the difference, the first time I hit my throttle i got thrown back.
@RyandKyHarleyGuys
6 ай бұрын
Always sweet to see improvements in the dyno🎉
@THRASHIN
6 ай бұрын
Definitely!
@amberbali8881
4 ай бұрын
Good video but I'm frankly surprised at the low numbers. What cam? I have a 114, Road Glide Special, Cam, KW 2-1, S&S Stealth AC, Power Vision tune. 123.56 HP / 134.02 TQ. The 134 tq hits at 3006 rpm and carries 130 tq to 4500. The 117 should be way higher than mine. Wish the the graph was in SAE and a 5th gear run. Mine was a 5th gear. Allen seems like a very cool guy.
@mikeskidmore6754
4 ай бұрын
When I was a teenager , every gas station had a bubble balancer in their shop. Spin balancers are supposed to do a static and a dynamic balance. The wheel can be off balance from side to side too . Obviously a car wheel spin balancer tells you which side of the wheel to put weight on and where on the wheel too .
@pearlnjade62
6 ай бұрын
Nashville watching...with tornado watch going on as we watch
@THRASHIN
6 ай бұрын
Hope you're all good!
@anthonyj6880
6 ай бұрын
Hell yesss stoked for the race 😤😤😤
@alanholcomb7285
6 ай бұрын
Stage your bike so that the second stage light just comes on and go on the last yellow lite. Then check your reaction time. Your time will still show even if you red lite then adjust your start.
@THRASHIN
6 ай бұрын
For sure!!
@andrewmendoza8165
6 ай бұрын
Hopefully i see you guys in AZ this week. Safe travels.
@THRASHIN
6 ай бұрын
You too!
@PackersFlip
6 ай бұрын
You guys should CAM the Fabricators 114 Road Glide and compare all 3 bikes 107-114-117
@Johnny5Rides
6 ай бұрын
Keep us posted on the MPG Juan and Lance are getting! I've had some tuning concerns lately and got my cammed 107 retuned recently and I'm getting around 35mpg. I'd love to hear what Juan is getting!
@THRASHIN
6 ай бұрын
We'll see what they get on their way to AZ today!
@nbitt1319
6 ай бұрын
Awesome vlog! Love the raw unedited footage kept in there. Hilarious!!😂
@steveo7767
6 ай бұрын
Cush drive replacement…excellent! I used the same one.
@mikehudecek9937
6 ай бұрын
What’s the name of that product?
@scottschiller1153
6 ай бұрын
Beautiful sounding machine😊!!
@THRASHIN
6 ай бұрын
It sure is!
@securityhead1396
6 ай бұрын
Chatham Uk watching. I also put Ohlins on my Dyna like you guys. Best regards Richard
@THRASHIN
6 ай бұрын
Stoked!
@cameronbartley6139
6 ай бұрын
Cool video guys. Good to see Givin that CVO sum TLC. SEE YOU GUYS OUT THERE AT ARIZONA BIKE WEEK... BE SAFE..
@THRASHIN
6 ай бұрын
Thanks! You too!
@steveo7767
6 ай бұрын
Lance, thrown some 2024 bags on your CVO and a 2 into 1 the racing S&S is amazing as well as the Vance and Hines!!!
@anthonygreco1130
6 ай бұрын
RB Racing black hole exhaust will also wake up the CVO !
@themindsmotor8539
6 ай бұрын
Thrashin I love the video ❤❤❤ - Lance 117 CVO sounds great and looks beautiful I hope she will perform as she looks on Thursday- I’m betting my money on Juan dog this time 😊😊😊😮. Praying for all of you 3 thrashers.
@THRASHIN
6 ай бұрын
Thanks for the love! Oh, she can perform!
@JamesLizama.actual
6 ай бұрын
What’s up the the burn out marks? Who complained?
@paulhewson4600
6 ай бұрын
Ya thats a Pussy move to have the burnout mark cleaned off that would be my last Tune at that place
@ParkStuntz
6 ай бұрын
They could be renting the shop?
@MarcusTurner-b6e
6 ай бұрын
Nice review keep up the good work Thrashin
@THRASHIN
6 ай бұрын
Thanks! Will do
@thexnewyorker7284
6 ай бұрын
Nice vid , I haven’t heard Mr softy music since I was a kid in Astoria 😂
@Streetglide2021CRUISEN
6 ай бұрын
Awesome video love watching you put the tires on you guys do a great job
@THRASHIN
6 ай бұрын
Glad you enjoyed!
@benmack8359
6 ай бұрын
Both set of pipes hurt your numbers. 2-1-2 with baffles is the way to go. Just got 126/139 CR 483 cam with port/polished 55mm throttle body and 6.2 injectors. The right set of pipes and baffles are key to the better torque.
@meanf1502
6 ай бұрын
Tank straps work awsome for hauling your bike around don't mess up your fork seals
@feedrate1
6 ай бұрын
You have to leave the bloopers in . Thanks guys for the awesome video. What was the green thing in the back wheel? 🤘🤘🤘
@THRASHIN
6 ай бұрын
Alloy Art Cush Drive Dampener!
@feedrate1
6 ай бұрын
Thank you
@sanibelinfluenced5015
6 ай бұрын
Can’t wait for Thursday!
@GregG_88
6 ай бұрын
Out of curiosity. How come you guys dont make pipes/ 2-1 for m8 baggers?
@THRASHIN
6 ай бұрын
Time! We have a lot of projects in the works right now so it's hard to juggle focusing on so many products. Hopefully one day we can get one dialed in!
@patrickhollis5332
6 ай бұрын
muriatic acid for the concrete makes for less work for sure but it will turn it white so might had to do the whole thing just according of how much yep the pads r wore out for sure
@Tonydoda
6 ай бұрын
Juan dude! when are you gonna make passenger peg mounts for baggers homie? I got all thrashin stuff all I'm missing is the mounts hahaha. Would be sick!! Alsoooooo black front brake reservoir caps!! You guys are the best! ❤
@cjkirk30s
6 ай бұрын
My dad taught me one thing before he left this shitty world "Be careful, be safe, don't stick your fingers where you wouldn't stick your face."
@THRASHIN
6 ай бұрын
Hahaha, we gotta put that on a shirt!
@Whizzy-72
6 ай бұрын
I would like to see a Vlog regarding the suspension u guys build in 🤘🏼
@THRASHIN
6 ай бұрын
Noted!
@paololololol
6 ай бұрын
Great video! Lance When are you gonna release that jacket on the website?
@THRASHIN
6 ай бұрын
We have some things in the works! Signup for our Email list to get updated on new releases
@tonniecate4231
6 ай бұрын
Looks clean. Lance's CVO needs a carbon front st fender. It would look killer.
@THRASHIN
6 ай бұрын
It would!
@toddchoops2488
6 ай бұрын
According to the manual those pins are a one time use anyway I found this out because I did the same dang thing LOL
@Ajoe5810
6 ай бұрын
Actions have consequences...No tacos but I got a chili rellano burrito to watch this...Get to the Strip!!!
@THRASHIN
6 ай бұрын
Thursday!
@lowriderstliving
6 ай бұрын
22 Lowrider ST S&S 465 Cam V&H 2-1 Perf Pipe S&S Stealth Intake DynoJet Tuner 124 HP/139 TQ Lance's CVO putting out those numbers with that setup makes me question my dyno numbers.
@hollandreece123
6 ай бұрын
I have a simular set up i haven’t had it on a dyno yet bet from everything ive seen your numbers seem correct maybe his 2-2 pipes are the issue
@streetsean
6 ай бұрын
I have to leave my F'ups in my videos because that's all I got...😂 Great video as always!
@THRASHIN
6 ай бұрын
You and me both! Thanks for the love!
@tttech4698
6 ай бұрын
When and where you guys going to az bike week? stoked to see you guys
@THRASHIN
6 ай бұрын
This week! Peep our IG for updates on where we'll be!
@coltwood5125
6 ай бұрын
Great video as usual homies...👍👍
@THRASHIN
6 ай бұрын
Thanks for watching!
@giddyuptwist665
6 ай бұрын
I think that cvo st has a 30 tooth gear that’s why that front end wants to pop up and it’s lighter
@THRASHIN
6 ай бұрын
Nice
@anthonygreco1130
6 ай бұрын
You are correct! Jerry Branch of Branch Flowmetrics spoke about this simple modification many years ago. RIP 🏁🏍️🏁
@302BAGGER
6 ай бұрын
I think lance was playing the sleepy dog on the last drag episode, in anticipation of needing “upgrades” well played sir!!
@THRASHIN
6 ай бұрын
Just wait 🔥
@russellmccullum4623
6 ай бұрын
What in the Red Neck Macgyver Noah's Ark hell is that balancer ??!! never seen one like that before . that's Wild !!
@THRASHIN
6 ай бұрын
It worked though!
@amberbali8881
4 ай бұрын
It's a bubble balancer. We all used them in the 60's, 70's 80's.
@thomastrevino7734
6 ай бұрын
I love fueling but I bet if you put the S&S in any of your bikes you will be upwards of 120 hp and 126 torque, if not more
@THRASHIN
6 ай бұрын
Maybe! But we're gonna rep Feuling till the grave...
@g-man_knifedude2146
6 ай бұрын
Juan needs to do a big bore kit next!
@THRASHIN
6 ай бұрын
He already entered some cheat codes...
@janicegelbhaar7352
6 ай бұрын
Watching from N C , love the video, you guys rock
@THRASHIN
6 ай бұрын
Awesome! Thank you for watching!
@SoCalRidersMafia
6 ай бұрын
Lance you're worth too much money to be risking those hands! thats what we got cole now for. LOL
@THRASHIN
6 ай бұрын
Hahaha
@benfischer655
6 ай бұрын
Hey boys, you said 31” multiple times on the CVO front wheel sure looks the same as my 21. I could be wrong. Either way love the videos and really dig the parts I’ve been able to afford so far for my 22’ SG.
@THRASHIN
6 ай бұрын
Haha yea, it’s a joke. We joke like it’s a big wheel bagger
@paulpotempa8829
6 ай бұрын
Pro operation like Thrashn doesn’t have an enclosed trailer? How’s Juan gonna start a taco truck side hustle?
@THRASHIN
6 ай бұрын
We're accepting taco truck/trailer donations now
@gghostrrider
6 ай бұрын
What are the green things called I’m confused? Like what is the technical name
@THRASHIN
6 ай бұрын
Alloy Art Cush Drive Dampener! It's designed to replace and outlast standard rubber cush drive and smoothen your ride
@supercarspecifics
6 ай бұрын
hey cole what car you drive, you've metioned you drag'd your car and remember I love all makes JDM, Muscle and exotics
@THRASHIN
6 ай бұрын
Go peep his Instagram!
@supercarspecifics
6 ай бұрын
@@THRASHIN ON IT my bro you guys should drag race the 2 trucks with bikes in tow
@LUKEH79
6 ай бұрын
Dope as always fellas ✊🏻
@THRASHIN
6 ай бұрын
Appreciate it!
@0LD4L
6 ай бұрын
As a Harley technician, watching some of this is painful ahahah but you gotta learn somehow. The hard way sometimes!
@THRASHIN
6 ай бұрын
Hahah!!! We’re great at some things, good at some, and getting better at others. Haha but honestly have no shame. That’s why we share it. We are great at what we do.
@0LD4L
6 ай бұрын
Ahahah aren’t we all. If only I could help out! Legit y’all are great at what you do, keep up the killer work 🤙
@corymcarter6405
6 ай бұрын
Super Cush drive mod lol…cheap but effective upgrade,smoke tires with confidence..
@THRASHIN
6 ай бұрын
LETS GOOOO💨💨💨
@noonespecial1217
6 ай бұрын
I’ve been listening to Cole. He uses a lot of “our shop” in his talk the last few vlogs. Completely different from several years ago before your regular Vlogs w/Rusty Butcher and friends. So here’s the question.. Cole’s an entrepreneur like yourself, and he has money,, my guess is he’s partnered in at this point to Thrashin Supply Company. Am I right?
@ParkStuntz
6 ай бұрын
Yes
@THRASHIN
6 ай бұрын
Cole's the boss
@1962egl
Ай бұрын
what gear did he pull the dyno in?
@chip9832
6 ай бұрын
24:48 let us know if that green cush makes a difference
@THRASHIN
6 ай бұрын
It's noticeable for sure!
@nbitt1319
6 ай бұрын
“The donk setting” 😂😂😂
@BrewTownBiker
6 ай бұрын
Let’s Gooo!🌮🌮🌮🌮🌮
@wiseeyemedia6289
6 ай бұрын
is that a Thrashin crewneck i see???👀
@DK-455
6 ай бұрын
You guys could have balanced your wheels easily by using the bikes axle and setting the axle on two milk crates or something similar , slowly spinning the wheel and noting where it stops . It will always be the same spot (the heavy spot). You then add a weight or two 180 degrees opposite. When you can spin the wheel and it stops in a different spot each time , you'll know it's balanced properly. Simple.. you don't even have to thank me .
@THRASHIN
6 ай бұрын
Thanks for the tips!
@DK-455
6 ай бұрын
You're welcome ! Thank you guys for the entertaining videos. I can't even imagine how much work it is, but just know how much we appreciate your efforts.
@reddevil331
Ай бұрын
What tires you running?
@hansolea
6 ай бұрын
Epic 🙌🏽 Epic 🤘🏽Epic ‼️
@jamescrooker9239
6 ай бұрын
When will the hoodies be restocked
@THRASHIN
6 ай бұрын
Working on it now! Sign up for our email list to receive updates!
@1962egl
Ай бұрын
Damm my 114 with a redshift 468 pulled 118/133
@unknownwsc7764
6 ай бұрын
Tire shop guy here. I'm just laughing my head off.
@THRASHIN
6 ай бұрын
Hahaha good times!!
@billyfinch7341
6 ай бұрын
Good stuff
@THRASHIN
6 ай бұрын
Tomorrows vlog is 🔥🔥🔥
@billyfinch7341
6 ай бұрын
@@THRASHIN Awesome
@danb9131
6 ай бұрын
Man… that thing is dialed!
@THRASHIN
6 ай бұрын
It is!
@steveschimmel1104
6 ай бұрын
Tire Balance Beads work great on motorcycles .....
@THRASHIN
6 ай бұрын
Good to know!
@pitt1108
6 ай бұрын
Static balance is the way moto GP does it. It’s said to be the most accurate way to balance a tire.
When are you guys going to start making raptor parts?
@THRASHIN
6 ай бұрын
Haha!!
@ms-22
6 ай бұрын
100% it was Gene that yelled at you for the burnout 🤣
@SoCalRidersMafia
6 ай бұрын
I love cole. But i think he smoke more weed than me. Dudes way to laid back LOL
@Bill0167
6 ай бұрын
Juan, I’m with you on bike in gear when you turn it off. I never leave my in neutral.
@SoCalRidersMafia
6 ай бұрын
Man Juan how u gonna leave the pin in homie! LOL Love ur ass
@portersadventures
6 ай бұрын
drop some soap on the bead before you remove old tire - goes a long way .... great vid
@THRASHIN
6 ай бұрын
Good tip! Thanks!
@paulgoolsby6120
6 ай бұрын
Clean that skid mark……No time for tacos!🥲
@THRASHIN
6 ай бұрын
Haha tacos will be back
@juanfgonzalez2039
6 ай бұрын
Use soap and water to remove and install tires much easier 😮
@freebehindbars8654
6 ай бұрын
*BeadBuster and you’ll never look back.
@juanfgonzalez2039
6 ай бұрын
@@freebehindbars8654 😂😂😂🤦♂️
@EzimMike
3 ай бұрын
I leave all my bikes in gears. I’m always afraid it will roll and fail over.
@chadmathews4631
6 ай бұрын
Man I wanna come hang out with you guys eat tacos and ride bikes
@THRASHIN
6 ай бұрын
Keep an eye out for our Grand opening announcement and you can come hang!
@jamie5428
6 ай бұрын
should have done a burnout in his shop this time
@THRASHIN
6 ай бұрын
Nahhhh, Allan is the man! It wasn't him that was upset. He loves the shenanigans!
@SoCalRidersMafia
6 ай бұрын
Bro mister softee stops by!! And you didnt stop for him?? Lance bro. have u ever taken the kids to get one? fr that was rookie moorpark mistake LOL
@THRASHIN
6 ай бұрын
Hahahah they come by multiple times a week
@SoCalRidersMafia
6 ай бұрын
I was just harassing u guys! Someone has too! I cant wait to bring FXR3 to your grand opening!@@THRASHIN
@775summit2
6 ай бұрын
Hey just curious why the Dunlop elite tires.
@THRASHIN
6 ай бұрын
No many make those tires sizes I think. But they work just fine for what we do anyways
@775summit2
6 ай бұрын
@@THRASHIN not a bad tire I had one myself. Just curious if you had any special reason. Second question yet 30,000 on the CVO and replaced that rear cush and rotors. I have 30,000 on mine wondering if I should start thinking about that? Thoughts
Пікірлер: 213