This is really helpful I would never have attempted to do this myself but this is like learning on the job. THANKS
@danweyer3612
6 жыл бұрын
I've watched all 4 parts of this video. It is the best how to video I've ever seen for old Mopars. Great job Cody. Please keep them coming
@theirishviking9928
6 жыл бұрын
Thanks a bunch Cody. Been on cudachallenger for a long time and getting fired up on the cuda.
@PatrickMichael2002
3 жыл бұрын
Thank you for the detailed instructions. I just got my new turn signal switch and need to pull the steering wheel in order to replace it. 👍😎👍
@TheLugnut
4 жыл бұрын
Terrific video. Keep up the great work!
@mikemccann7510
5 жыл бұрын
Thank you so much. I have been searching on how to replace the steering coupling on my 74 Challenger. The seal at the end of the coupler disintegrated in half and was wondering how to fix it. I now know what to order to be able to fix it. Awesome video's, watched them all.
@5BobbyDavis
5 жыл бұрын
Very professional and informative video.
@blk86trbo
6 жыл бұрын
Very informative, it helped me, thank you
@CoyoteCarChannel
4 жыл бұрын
Hey, I liked your video ! Thank you.
@ernestzabala4007
2 жыл бұрын
Awesome info!!
@skipsims2384
Жыл бұрын
Hey folks, I’m hoping someone might have a wave washer, last guy that went through this column left it out so, any help would be great, Cody of you have one, I’d be grateful, great vid too buddy!
@jakeblondelle8100
6 жыл бұрын
Great video, very informative...would the meat and potatoes part pertain to B bodies as well?...I'm researching to repair my 70 Roadrunner column
@Switching-Cars
7 жыл бұрын
nice video and tips and you got one new subscriber :) cam here because my 74 barracuda steering wheel as a grinding sound wen i turn and sometime it catch and i am wundering what could do that ? thanks
@59Napoli
4 ай бұрын
Superb and well narrated video for the DIY'r. Is there a website where I can buy a complete kit to rebuild my 70 Cuda Steering Column please? Thanks again, Look forward to watching more videos!
@robertlevine8243
5 жыл бұрын
Great video any videos on a 71 A body steering column rebuild ?
@Master_Shredder420
5 жыл бұрын
its basically the same thing
@Matt-eb8nm
Жыл бұрын
Can I use a steering wheel puller with 3 claw's to pull the steering wheel bearing housing and protect the housing with h rubber shims?
@juannoria2285
5 жыл бұрын
I have a 74 Chrysler New Yorker and was wandering if you could help me with the steering column.and how it all gose together from the horn to the ignition..any help would be appreciated ..thank you..
@rexosteen5451
2 жыл бұрын
hWat if you only want to diagnose/replace your ignition switch? Do you need to use the Miller tool c-4044. At 11:08 the upper bearing suddendly appears raised with the steering shaft. Can I attach a bearing and tap it the way you did to get access to the ignition switch?
@DannyRayHill-dn3oh
21 күн бұрын
73 challenger stirring column. Does the bottom of the column shaft have a bushings as the column comes out of the stirring column?
@pickles1st
6 жыл бұрын
Where do you get the bearing?
@richardharm8860
2 жыл бұрын
Wanted to ask you, I currently have Manual steering (70 Cuda) I want to move to Power Steering, can I use the same shaft by collapsing the pins, and will that actually work or, do I need to find a Shaft from a factory power steering e body. Thanks
@alexp5681
5 жыл бұрын
I have a big problem dnt have any of the screws would any one have the pitch and size of them
@MikeKocerha
7 жыл бұрын
My 73 challenger, slap stick auto doesn't have either that wavy washer or the allen locking key
@kellennelson1061
Жыл бұрын
Where can you find the wavy washer,having a hard time finding one
@1974charger123
7 жыл бұрын
I am looking for a replacement wavy washer and associated guide for my wavy washer for my 1970 challenger steering column. Would you have a spar or know where I can get a replacement?
@CudaCody
7 жыл бұрын
I've haven't yet found a place to get replacement Wavy Washers. I'm sure there are out there, but I just don't know where. I'm pretty sure some one of the members on the forum forum.e-bodies.org would have an extra or you can watch eBay. Sorry I don't have any extras right now.
@MrFiloubidou
4 жыл бұрын
Hi Cody, awesome videos, Will be very helpful quickly. May I ask you the name for the cover (part ref/ reseller) at 12:48 ? Cant find ☹. Thanks
@codyreich
4 жыл бұрын
I do not know of anyone that makes those covers. Best bet would be to get a used one from someone or a junkyard. Contact David at Roseville Dodge and he might have one. David 586-859-2575
@skipsims2384
Жыл бұрын
Did the wave washer get eliminated in 71 for reasons that the reverse lockout changed? I don’t have a wave washer in my 71 column. Anyone care to comment and share?
@angelacorbeil9931
Жыл бұрын
Hello, I have an E-body which I purchased from my dad. The 73 Challenger has been sitting for a really long time and one of the reasons why my dad stored it was because of a steering failure he had while driving it one day. While the car was running, the steering column locked up on him while he was making a sharp turn. With only milliseconds to decide what to do, he was able to force the steering wheel free of being locked. With that story in my head and now having the vehicle, I've just decided to replace the whole steering column (the goal is to restore/replace all the critical mechanics), however, after watching your video, I'm just curious on if you have any thoughts as of how a steering column could have locked up while driving. I just confirmed with him that he stored it after it happened the second time.
@car_ventures
6 ай бұрын
11:12 I'm stuck. C clip removed and I dare not tap harder with hammer. Trying to pry it forward but won't come forward
@pickles1st
6 жыл бұрын
And the buzzer switch I can't find them
@OnederElite
4 жыл бұрын
Hey Cody, question for you. While pulling on my column to try to get it free from the steering box I collapsed the pins referenced at around 11:30 of the video and my shaft is in two pieces now. Am I screwed, or is there a fix for this?
@codyreich
4 жыл бұрын
Easy fix. You just need to align the pins and put some special Loctite on it. This thread has more info... forum.e-bodies.org/wheels-tires-brakes-suspension-and-steering/12/best-collapsed-steering-shaft-repair/10973/
@OnederElite
4 жыл бұрын
Thank you sir!
@Switching-Cars
6 жыл бұрын
hi the part you have in your hand at 21:58 well the bearing is done in it in my 74 barracuda, do you know what is the part number ? thank you
@codyreich
6 жыл бұрын
Mr Pat, Wish I could help you but I don't know what part you are referring to.
@Switching-Cars
6 жыл бұрын
sorry i meen the parts at 17:38
@codyreich
6 жыл бұрын
Are you talking about the upper steering column bearing? www.rosevillemoparts.com/product_info.php/p/bearing-upper-steering-column-shaft-all-62-90/products_id/1794
@Switching-Cars
6 жыл бұрын
ya that must be it, the bearing just past de ignition key is done, looks like a hell of a job to do, i am at the steering gear for now, i need to continue to get to the dang bearing. thank you for your help.
@cuda383440
Жыл бұрын
What's that stupid cup on the steering colum? And how do i remove it ?
Пікірлер: 45