Go buy your own FW-190 PNP with our affiliate link: alnk.to/7X0Ahsg
@austinandtate
2 жыл бұрын
Your content is exactly what the RC space on KZitem needed. Great job man! Keep it up!
@TailHeavyProductions
2 жыл бұрын
Thank you! Glad you enjoy it 👍
@michelpetrus
2 жыл бұрын
Cannot agree more.
@jamesblake1848
2 жыл бұрын
agreed 👍👍
@Hype_RC
2 ай бұрын
Thanks for this one guys! I got one before they were discontinued and it absolutely helped me evolve as an Rc pilot . Thanks again 🙏🏾
@SamuelVega-r4u
6 ай бұрын
this Chanel is exactly what the rc comunity needs thank you keep it up
@gmorphan
2 жыл бұрын
I bought the FW190 4 months ago when HH had for $150 off and I'm so glad I did. This thing is tame when compared to it's brother, the 1.5 Mustang. I've only been flying for 2 years. but I'm able to look good in the sky with this warbird.
@mattmiller7494
2 жыл бұрын
If you break the tabs off the battery tray the fix I’ve used is to drill straight down through the rails at the back of the tray when fully inserted. Then insert a toothpick in the holes you drilled, cut to the height of the canopy so they won’t fall out during inverted flight. Works great on the Pitts 1400 as well to keep the battery from sliding back or you can use the bumper attached to the bottom of the canopy method that keeps the tray from sliding back. Either work fine but the bumper limits you to one battery size. Great videos guys, excellent flying!
@mattmiller7494
2 жыл бұрын
I’ve got a question for you since you guys modify airplanes more so than I do. I’ve got a motor out of another plane which is exact same dimensions but it’s 550Kv. The FW is 460Kv factory, do you think the extra 90Kv would make much difference in speed or power with the stock propeller? I didn’t want to modify the looks but get some more performance. Also my opinion but the three point landing doesn’t make the geometry of the landing gear work and I believe causes more damage than putting down on the mains then setting the tail down. I’m landing on dirt which is is a bit risky for landing on the mains, sometimes wheels will dig into a soft spot.
@Themilkman12345
2 жыл бұрын
Could you do a 3d trick series. Like the names of manoeuvres explanations and how to
@conndog7876
2 жыл бұрын
Awesome video. Would love to see a review on the recently released 1.2m Corsair by Eflite!
@Juiesxvgezchgdd
2 жыл бұрын
Same
@shelbyseelbach9568
2 жыл бұрын
It's the same as it has been for years with new Smart electronics. Really nothing new. Horizon Hobby didn't really push the envelope with this one. Just an update to an existing plane.
@roanlagos
Жыл бұрын
Great review guys! Snappy and informative! Just picked up one of these second hand and looking forward to flying it after changing out the basketballs lol.
@mikelarin8037
2 жыл бұрын
Finally, my weekend dose of tail heavy, now I can go out and fly
@skipatrollife-southernutah7805
2 жыл бұрын
Fantastic review, thank you guys for putting it together.
@themadscientistg7804
2 жыл бұрын
This dude speaks the truth. This butcher bird is awesome even with some minor flaws.
@Catofbaskerville
2 жыл бұрын
I think this would be a plane i may consider buying some day!
@chuckcawthon3370
2 жыл бұрын
Excellent Presentation. Great plane and honest valid critique .
@TailHeavyProductions
2 жыл бұрын
Thank you! That’s our goal with our reviews so it’s great to see the feedback. -Zach
@ramsandrzr3706
Жыл бұрын
Awesome video very informative great flying love this channel 👍👍👍👍
@air-headedaviator1805
2 жыл бұрын
Tail Heavy calling this the warm up plane, when this would be the aspirational one for me :v
@boss2234
Жыл бұрын
Love this plane.
@narenpai
2 жыл бұрын
You Guys should try the vailiant! It is a great plane
@jakeharrington3781
2 жыл бұрын
I’ve been following THP for a few months, and it s incredible. I always look forward to new vids.
@TailHeavyProductions
2 жыл бұрын
Thanks, Jake!
@av8tore71
2 жыл бұрын
It has an excellent dihedral wing which makes it very stable just like the Mooney I have at the airport and the one I scratch built out of balsa with an Oak spar.
@TailHeavyProductions
2 жыл бұрын
Yep! Sure does. I loved the Mooney I flew during my time building. Miss it a lot. -Zach
@Juiesxvgezchgdd
2 жыл бұрын
Another great vid so underrated
@maxabeywickrema8975
2 жыл бұрын
awesome videos! I've watched every single one. Can you do a video on the p51d that would be rad
@givdulsen
Жыл бұрын
I would love to see a review on the FMS 1400mm Corsair. Great video!
@Drifter-cz3lj
2 жыл бұрын
Such a Great video! You guys are so underrated! great editing!
@TailHeavyProductions
2 жыл бұрын
Thanks! Ben’s not only a great stick but also a talented man with a camera and editing software. -Zach
@yodecaf
2 жыл бұрын
You got the format down! Relatively short with great editing and unique information that only a pilot could tell you.
@Veneno2911
2 жыл бұрын
Can't wait for mine its on the way
@RedZone54
2 жыл бұрын
Would like to see your review of the eFlite 1.5 Meter P-51D
@steelrainfpv3383
2 жыл бұрын
As with most Eflite airplanes, the hard tires and battery straps are near useless, although the battery straps on this model are quite sufficient. I usually replace the wheels and tires with some equivalent and suitable DuBro low bounce variants, which help significantly with ground handling and landings, but their drawbacks are increased weight and non-scale looks.
@porternesbitt
2 жыл бұрын
Love it! You guys have or interested in reviewing any of the Durafly warbirds? I've got the MK1 and BF109E4 and I love them both they are such good flyers. Keep it up!
@TailHeavyProductions
2 жыл бұрын
Thanks! We haven’t considered it, nope, but cool to hear you’re enjoying them! 👍
@hoodzie9671
Жыл бұрын
Great video
@KB_RC
2 жыл бұрын
Awesome guys! I saw this is person for the first time at Oshkosh. I wonder how differently it flies from the P-51 1.5m??…the P-51 for me is pretty easy to fly! Even at slow speeds surprisingly!
@CalebT_RC
Жыл бұрын
Try the large blue p-51 from eflite. Some people say it’s a pain to land.
@snedhepsquadron406
2 жыл бұрын
when it isn’t backorderd, you should do a review on the eflite 1400mm A6M3
@Veneno2911
2 жыл бұрын
Can you review the eflite 1.5m p51
@tughillrc6327
2 жыл бұрын
Great review 👍
@phillipstutte71
2 жыл бұрын
Please review next the new funcub
@TailHeavyProductions
2 жыл бұрын
If we can get one in the states we will! 👍
@av8tore71
2 жыл бұрын
Gotta fly that tail
@TailHeavyProductions
2 жыл бұрын
You got that right!
@air-headedaviator1805
2 жыл бұрын
Say! Since you’re a learned aviation person in industry and hobby, would you know what correlation having heavier wing loadings due to flight performance? Like is there anything high wing loading allows a plane to do vs a low wing loading, or if able would you always want as low a wing loading as possible? I’m someone who fiddles with designing RC planes and would appreciate the insight!
@MChronicleSword
2 жыл бұрын
High wing loading gives more stability in windy conditions and high speeds
@TailHeavyProductions
2 жыл бұрын
Here’s a basic rundown for ya! Mel got it, too. Low wing loading = floaty, great for STOL, 3D, etc. Bad for turbulence/wind. High wing loading = better able to handle higher winds and turbulence without getting totally annihilated but requires more attention of the pilot at lower air speeds and high angles of attack. This is because you’re operating closer to the critical AOA during takeoff and landing.
@odiewan67
2 жыл бұрын
Have you guys done a flight review of any 3d printed airplanes?
@TailHeavyProductions
2 жыл бұрын
We have not nor do we have access to a 3D printer unfortunately.
@Robot_Child_Productions
2 жыл бұрын
Can you find and review a plane called the rainbow. You can fly it light or you can fly it heavy, it’ll do what ever you want it to. I have 1 that I when I go to the farm and do bush flying take all but bare avionics out but when I’m at the feild I fly her heavy
@davidmcneill3809
2 жыл бұрын
I wish I could land it that good.
@noahcutting546
Жыл бұрын
Could you review the Ultimate 3D Form Horizon Please!!!
@stratos2
2 жыл бұрын
This video was really nicely made, high production quality, detailed content.. however I couldn't help but feel like this was a sponsored advertisement more than a review, even if that is not true. I am sadly not fully sure what caused that.
@RadimentriX
Жыл бұрын
can the ar620 relay ESC telemetry like voltage, amperage, rpm etc to the radio?
@AveragePilot9201
Жыл бұрын
Got this plane brand new from a friend for only 300. Unfortunately I am too scared to un box it haha.
@TailHeavyProductions
Жыл бұрын
Nooooo! 🥲 Open her up! Such a fun and rewarding bird.
@AveragePilot9201
Жыл бұрын
@Tail Heavy Productions I would but I haven't flown for awhile and have never flown with max control arms. I'm worried the plane is a tad out of my league currently at least until I get back into it. And it stops being windy in north dakota
@sawyerheslep8493
Жыл бұрын
@@AveragePilot9201how'd it go?
@AveragePilot9201
Жыл бұрын
@sawyerheslep8493 ummm, haven't had time to fly it unfortunately, and still too scared too haha
@sawyerheslep8493
Жыл бұрын
@AveragePilot9201 follow up! So how'd it goo?
@snoriverrc3842
2 жыл бұрын
Do you still fly out of Marymoor RC or did you move?
@TailHeavyProductions
2 жыл бұрын
We’ve moved out of state
@trainsplanesandautomobiles2547
2 жыл бұрын
When you do a slow roll do you include rudder when your sideways. Because I can do fast roles and somewhat stay at the same altitude but when I do a slow role I loose a lot of altitude when the plane is sideways
@TailHeavyProductions
2 жыл бұрын
Yep, slow rolls incorporate every flight control at some point throughout the maneuver. The way I learned them was by making sure my inverted flying and knife edges were down first, then practicing slow 4 point rolls, and then blending them all together and trying out slow rolls. It’s definitely a more streamlined process if you learn it building block style. 👍 -Zach
@trainsplanesandautomobiles2547
2 жыл бұрын
@@TailHeavyProductions ok thanks! I just need to work on my knife edges a bit I guess
@jaythurb
Жыл бұрын
I have troubles with it pulling left on takeoff even when I ease on the throttle any suggestions on takeoff?
@TailHeavyProductions
Жыл бұрын
Be ready on the right rudder! 👍 It’ll still be required regardless of the throttle input rate.
@revsonsrc9573
2 жыл бұрын
So thoughts on the durafly tundra ?
@TailHeavyProductions
2 жыл бұрын
Sounds like we’re gonna have to do a review on it! 👀
@revsonsrc9573
2 жыл бұрын
@@TailHeavyProductions that would be awesome seemed to come out swinging at the timber while back and had forgotten about it. As the timber continues to grow and it just seemed to grow silent. Recently stumbled across them again in my search for more stol maybe it will be a good one decent priced at least but worth buying over a timber 🤔 🙌 would love to see you guys on the sticks with one
@ernestostrman5147
Жыл бұрын
Still havent flown mine
@miller330i
9 ай бұрын
can you add fvp to this?
@zeno6111753
2 жыл бұрын
All foam plane manufacturers should sell pots of paint for their models..
@bowenbrown
2 жыл бұрын
Say….. if it is a trainer as the title says, then I need one.
@boss2234
Жыл бұрын
E flightP51 1.5 mustang
@Oggibb
Жыл бұрын
Carbon cub ss Try please
@daysdesigns
2 жыл бұрын
It's unfortunate these companies won't use a halfway decent material for their retracts that doesn't end up egg shaped and flopping around all loose even after multiple greasy assed landings! LOL
@rcplaneuser
5 ай бұрын
Rewew the eflite ultimate 3d
@clarencegreen3071
Жыл бұрын
Could not watch. Music, or whatever that background noise is, is unbearable. Clean, uncluttered audio is very important. Why doesn't the evening news have a musical background?
Пікірлер: 86