Short and to the point How these types of videos should be made. Very good
@jyrbr9292
2 ай бұрын
Thank You! Great job
@rosemcbirney5123
2 жыл бұрын
Excellent shows where lever should be 3” on lever 3” on blade. Thankyou
@bentystoystore3768
4 жыл бұрын
Great job! Thank you!
@jamesingram3752
4 жыл бұрын
Great video dude!
@railfanjames7699
5 жыл бұрын
Hello, will this also apply for a 2007 John Deere la150 hydrostatic lawn tractor? 54 inch Edge deck.
@gillchaser449
4 жыл бұрын
I set my john deere Z345R so the front of the deck (actual blade cutting hight) is balls on to the height lever, and the back 1/8 - 1/4 high this ensures the correct actual cutting height.
@wcb22516
4 жыл бұрын
I have an 2003 or 04 L130 with a 48 inch deck and a different kind of bolt and shackle type of a system. I and having trouble trying to get it level. Any advice, can not find any video with that type of deck setup?
@sidwalker6902
3 жыл бұрын
The front was already set at 3", so why didn't you raise the rear of the blades by 1/8 to 1/4? That way the deck height lever would be correct for cutting at 3".
@Smalltechguy
5 жыл бұрын
I'm not finding anything on a L118 Deere. The adjustments are different.
@Robey1Kenobi
5 жыл бұрын
So you don't measure side to side?
@ivand964
4 жыл бұрын
what's different about E series and D series ?
@BarraGutheWorld
4 жыл бұрын
The d series are the older model of the e series
@ivand964
4 жыл бұрын
@@BarraGutheWorld Thank you
@markrini8111
3 жыл бұрын
couldnt you just place the tool on the rim of the deck
@robertmcmahon6061
4 жыл бұрын
forgot side to side...do it right, or not at all
@erh345
3 жыл бұрын
Your instructions are not exactly the same as the owners manual. What's the advantage of your way compared to the owners manual??
Пікірлер: 17