26mm Nibbi carb comparison and tuning on the Grom clone Hellcat 125. It is way lager all the way around for performance, but is it needed on what I have now? Seems the Nibbi is a bit too much for my configuration but did as good as the Mikuni. I also test which jets will fit in the Nibbi carb
I ended up with a 120 main! After multiple test drives and adjustments.
Keihin jets will fit the Nibi
It doesn't have to be fast to be fun, Create your own adventures
Current video links:
Adjustable intake: amzn.to/2yoWxqb
Nibi 26mm carb: amzn.to/2WbIQ74
Mikuni 26mm carb amzn.to/2WJmhFU
intake adapter swing plate: amzn.to/3drWVTp
It goes pretty good for a 125cc bike (55 mph after tune), suspension is nice, braking is good. 0-50 mph in 19 seconds
Links:
I get my bikes from Txpowersports.com use MOTOCHEEZ at checkout for a discount bit.ly/3asOO81
Shinko Offroad DOT Grom tire set: ebay.to/3dKIoDB
Jet kit: amzn.to/2Qf8PrJ
Frame bolts: The ones on a bike or metric but 5/16-18 or 24 (preferred) 5" long will work. I'd get grade 8, Grade 5 minimum. (ebay.to/2zdtG8a Grade 8) (ebay.to/2L5sCWq Grade 5)
I think it would be an awesome around town or city bike. Just like the clone it is not very fast
Available in Red, White and Blue!
PROS:
Honda clone horizontal 125cc engine
CONS:
no kickstart, Electric only
Specs: (most from Txpowersports website)
HELLCAT 125 ENGINE:
Engine Size: 124cc
Type: Electric start
Transmission: 4 speed manual with clutch
Drive: Chain drive
Cooling: Air Cooled
Ignition: CDI
Fuel Tank Capacity: 1.5 Gallons (5.5 L)
Top Speed: 54 mph (After Mods)
Horsepower: 12 (estimated)
Spark Plug Type /
Gap: A7RTC / 0.6~0.7 mm
Battery: 12V 7Ah (Included)
CHASSIS:
Front Brakes: Hydraulic Disc (Hand)
Rear Brakes: Hydraulic Disc (Foot)
Front Rim: 2.75 x 12 Alloy rim
Front Tires: 120 / 70 - 12
Rear Rim: 3.5 x 12 Alloy rim Rear
Tires: 120 / 70 - 12
Front Suspension: Dual inverted forks
Rear Suspension: Single shock absorber
Ground Clearance: 4.3 Inches (110 mm)
Seat Height: 30 Inches (760 mm)
Wheelbase: 49 Inches (1250 mm)
DIMENSION:
Overall Dimension:
70 x 30 x 39 Inches (1790 x 750 x 995 mm)
Carton Dimension: 64 x 22 x 32 Inches (1620 x 565 x 810 mm)
N.W.: 207 LBS (94 Kgs)
Watch us Unbox, assemble and review this bike with my opinions on it along the way, good and bad. I make these videos so you know what to expect when you purchase one of these Chinese bikes, I keep it 100% honest with what I find. Assembly is about 1 hour.
------------------------------------------------------------------------------------------
Like my videos? Links below, be sure to like and follow please :)
TaoTao Playlist:
DLX Hawk Playlist:
Go to www.motocheez.com for most up to date discounted links.
Thanks you for watching, PLEASE subscribe!
▽ Follow MotoCheez
Instagram: / motocheez
Facebook: / motocheez
Web: www.MotoCheez.com
Copyright Disclaimer Under Section 107 of the Copyright Act 1976, allowance is made for "fair use" for purposes such as criticism, comment, news reporting, teaching, scholarship, and research. Fair use is a use permitted by copyright statute that might otherwise be infringing. Non-profit, educational or personal use tips the balance in favor of fair use.
Custom intro music and Voice-overs by Harp C Chord, Ryan Harper.
Негізгі бет (E8) Hellcat Raptor 125cc Nibbi Carb side by side comparison Keihin Mikuni. Tuning jetting
No video
Пікірлер: 311