I just made 230hp 152tq stock block with tuner2 cams on pump 92
@XJAYARE2Xx
2 жыл бұрын
I believe I saw your video last night on Facebook. It’s in a black crx? Those are good numbers!
@jasonlowther9936
2 жыл бұрын
@@XJAYARE2Xx yes
@XJAYARE2Xx
2 жыл бұрын
Some head work goes a long way!
@jasonlowther9936
2 жыл бұрын
@@XJAYARE2Xx it helped alot it could have made way more if I kept reving it
@XJAYARE2Xx
2 жыл бұрын
Now days you don’t need much to make some power. As long as it’s properly balanced it works. What are your future plans with the setup? You going for more power?
@JohnSmith-qn5ib
6 ай бұрын
What city is KV tune? And how much for a tune?
@XJAYARE2Xx
3 ай бұрын
You would have to contact him for pricing. He’s located in Bloomington Ca
@JohnSmith-qn5ib
3 ай бұрын
@@XJAYARE2Xx yup he already tuned my b20vtcec 228 hp
@mikebalzerhuge
2 жыл бұрын
Good numbers for all motor. 1/4 mile pass?
@XJAYARE2Xx
2 жыл бұрын
Thanks, Numbers are solid for being all motor. I’m gonna shoot for more in the future. I need to make a few changes first. That will happen over time, I want to enjoy this first. Yes I want to test 1/4 mile. Just need to find the free time first.
@lostboy1719
2 жыл бұрын
that tuner funny lol got the same setup i got the b20v with type r lsd trans, 250hp on e85
@XJAYARE2Xx
2 жыл бұрын
Kv is coo, definitely very knowledgeable! He aims to help with the most beneficial results. He got the most power out of what it was. I made 233hp n his dyno reads lower than most around. So the numbers I made are closer to your hp. I’m sure you car boogies! That trans is beast!
@Luisangelangulo2
2 жыл бұрын
220 is little bit I seen fully bulit b20v all motor push 263 whp
@XJAYARE2Xx
2 жыл бұрын
I actually made shy of 250 but I just said 220 due to it being a street car. Now that I threw a rod I don’t mind the numbers being out there. This was on e85 with small bolt ons and small cams. It made great numbers for what it really was. The tuner was surprised it made that much.
@juliusbatista4100
2 жыл бұрын
I knew it lmao I’ve seen plenty people making around 200 with a stock b20v and that’s on pump gas
@XJAYARE2Xx
2 жыл бұрын
@@juliusbatista4100 yeah now days it isn’t to hard to make 200 with a bseries all motor. Before I rod knocked the tuner told me with some stage 2 cams, 90mm throttle body, bigger header, and a victor x manifold I would have made 270-290 on race gas. I didn’t make it that far unfortunately but my new swap is almost done. The crank and block just got sent out to golden eagle for some touch up work. After that my builder will crank it out. I got tons of new parts! Stay tuned!
@jasonlowther9936
2 жыл бұрын
Not bad at all
@XJAYARE2Xx
2 жыл бұрын
Thank you I appreciate 🙏🏼
@93jdmmike
2 жыл бұрын
Good stuff
@XJAYARE2Xx
2 жыл бұрын
Thank you 🙏🏼
@nepzski
2 жыл бұрын
9k rpm or 10k?
@XJAYARE2Xx
2 жыл бұрын
Around 8700
@nepzski
2 жыл бұрын
@@XJAYARE2Xx sounded like much more lo
@rodrigobarreraloaiza3054
2 жыл бұрын
What set up used?
@XJAYARE2Xx
2 жыл бұрын
B20v high comp Built gsr head with mild cams. Basic bolt ons. This setup just rod knocked on thanksgiving. I’m in the process of building a replacement short block.
@rodrigobarreraloaiza3054
2 жыл бұрын
What piston and cam used?
@XJAYARE2Xx
2 жыл бұрын
@@rodrigobarreraloaiza3054 It was a 92mm stroker kit from BC. Had custom 13:5:1 Cp pistons n rods. I had Blox B cams which were small.
@Josh-wu7un
2 жыл бұрын
🔥
@XJAYARE2Xx
2 жыл бұрын
Thank you 💪🏼
@robalonches4940
2 жыл бұрын
Htfu
@XJAYARE2Xx
2 жыл бұрын
If you’re serious chava give me some time to test the car and we can work something out in the near future.
@robalonches4940
2 жыл бұрын
@@XJAYARE2Xx just playing with u my boy good shit keep up the good work and videos coming 👌👌..I can't really drive stick shift any more clutch leg too slow...
@XJAYARE2Xx
2 жыл бұрын
I was like damn that was fast haha. Thank you I appreciate it, I’ll keep the vids coming 🙏🏼. Damn at least you can still drive though. Progress is progress 💪🏼
Пікірлер: 41