Thanks for your videos. I have a 22 lt1 and enjoy watching and learning on what to do when I start doing mods to my car.
@joseluisgonzalez2081
10 ай бұрын
Thanks for watching appreciate your support 💪💪🙏🤝
@sergebasque8460
10 ай бұрын
Dyno with the closed hood you just proved it , those cold -air kit will only give you 8 to 10 maybe. When you tune it first time you will gain the most hp&tq, the cold air is not so the proved is in that video. Maybe when you supercharge it maybe you will pick-up hp&tq. Excellent content man honest you are thanks!
@joseluisgonzalez2081
10 ай бұрын
Thanks for support 💪💪
@erickreyes7373
10 ай бұрын
I saw you went 7.2 in the 1/8 mile felicidades bro !
@joseluisgonzalez2081
10 ай бұрын
Thanks brother finally we going faster
@1clean35th
10 ай бұрын
Absolutely 1000% the right decision. Over 1k in parts and lose power. Yeah send it back and use that money for a cam
@joseluisgonzalez2081
10 ай бұрын
Hahaha I’m really looking into those no chop cams tempting
@sergioduran3545
8 ай бұрын
Should have done a pull with your stock intake with the hood closed as well. The best 442 you got was with the hood open. Like you said, you don't race with your hood open
@1diybrotha
7 ай бұрын
The 103 an the Fab works better with boosted applications, stock apps it doesn't apply to well... but boosted apps needs more air flow an stock restricts that and It made a difference when I went to those 2 but I added a 2650 Magnuson SC.. made a difference.. Like the Vids
@EssMotorsports
10 ай бұрын
That honestly doesn't sound right if your car was untuned and didn't pick up barely anything. The car limits itself with the torque modeling. Tells me your tuner was not adjusting the torque tables, driver demand, peak torque, etc. Was he verifying the throttle open percentage? My car only opened throttle 62% after my mods.
@joseluisgonzalez2081
10 ай бұрын
Yes he tuned it well between the swaps of parts. But you also need to consider that the average car doesn’t have a tunner on site like we did to tune and adjust. Car was tested yesterday and just went fastest it has ever gone full weight And heavy driver me lol 7.210 @98
@chrishouston1406
10 ай бұрын
The true comparison for the airboxes is at the track. Stationary dynos are stationery dynoes.
@joseluisgonzalez2081
10 ай бұрын
Valid point. The fan in the front of car only has one steady speed. At the track air increases as you progress in speed. Great idea for a video. I still have the rotofab I’ll test it at the track. I’ll ask my tunner to send me the file that has the corrections for the roto fab to make it abit more controlled
@chrishouston1406
10 ай бұрын
@joseluisgonzalez2081 I feel like a back to back track test would be the final chapter on this subject. 😁
@joshwhite9983
10 ай бұрын
What was your Ethanol % at when you ran the 7.2?
@joseluisgonzalez2081
10 ай бұрын
I pumped a bit to raise it. I was at 69% And half a tank. So I kinda screwed up because I couldn’t waste it fast enough so I was racing a bit heavier than usual. I usually like to only have 1/4 of a tank. But our cars are really efficient lol
@TALIBAN47
9 ай бұрын
They have a 107 mm now
@FerasDishli
8 ай бұрын
Man you have to close the hood completely 100% to seal the Roto-fab , because it’s sucking hot air from the engine bey . I understand you could not close the hood because of the wires.
@mpulidolt1
10 ай бұрын
🔥
@joseluisgonzalez2081
10 ай бұрын
Thanks bro
@jamesechevarria3407
9 ай бұрын
I think you need the fan on so it can force air into the intake, do you have long tube headers? The engine is limited to the power it can create with that bottle neck at the exhaust
@gsfootage5959
9 ай бұрын
I honestly don't think exhaust is an issue or a bottle neck. th 6 Gen Camaro exhaust is very capable of supporting high horsepower. not to mention this car has c deletes, corsa x pipe and corsa extreme mufflers. A fan was in front of the vehicle and turned on with the rollers
@godspeed323
10 ай бұрын
Get a different brand I heard someone’s experience on his hellcat with a rotofab he lost by a car every time with a stock hellcat
@joseluisgonzalez2081
10 ай бұрын
Yeah that would be another good idea for vid. I’ll keep an eye out for a good used one. I actually like the carbon fiber Afe it’s so nice
Пікірлер: 25