You saved chick's lives. You are a true friend of birds.
@jontodryk1972
9 ай бұрын
Excellent thank you
@JeffBarricade
Жыл бұрын
Thank you for this video. I just want to get your thought on something. I have 3 different hygrometers (of course showing 3 different RH levels) and I've completed this test more than once and I do believe I am doing it correctly. I've tested and calibrated my Govee Wifi Thermo-Hygrometer three times (the first one was a salt test, the 2nd one I used a Boveda pack which supposedly guaranteed 74% RH, and the 3rd time I did the salt test again based on your video and used your chart for calibration). The thing that bothers me is that all tests have resulted in me calibrating the Govee at, or around, -7.0% RH in order to achieve a reading close to what it supposedly should be based on these tests. Once I adjust the Govee, the other two monitors will typically be around plus or minus 2-3% of the Govee. I do not know that I can trust those monitors either. Does a calibration adjustment of over -7.0% seem plausible or ridiculous? I find this to be a rather high calibration adjustment but I would love to hear other opinions. Thanks.
@benjamincrooker2533
3 күн бұрын
Over time, the little sensors inside the units get dirty and that's why you have to adjust/ calibrate them. Since there's not really a good way to clean them, you throw them away when you can no longer make them work right. So adjusting them plus or minus 10% doesn't really make any difference, as long as the end result is achieved. 😊
@jontodryk1972
9 ай бұрын
I use these in all my guitar cases
@davidhalldurham
Жыл бұрын
Very helpful video, Eric. Thank you.
@georgesevelle8778
Жыл бұрын
Eric, thanks again for an excellent video and information.
@marksabota4056
Жыл бұрын
Great video! Thanks. I have govee wifi hygrometer and I calibrated it about 2weeks ago, but I notice when my inkbird or thermpro reading 78-79 govee shoots way over 80% so I'm a bit concerned about how accurate it is between inkbird humidity controler and thermpro thermometer 🤔
@shelltown5663
Жыл бұрын
Interesting question.
@echohollowhome
11 ай бұрын
This is so cool!
@EL1TExATHLETE
11 ай бұрын
Easier way to make sure you have a proper humidity level is to use Boveda packs
@BillAckerman
Жыл бұрын
Another great video, Eric. I live at over 7000’ above sea level. Does the assumption that the relative humidity inside the ziploc is 75% still apply?
@horti.curious
5 ай бұрын
Can you tell me what the humidity readings after calibration should be at lower temps? Like 60-68? (My temps are at 61.) Thanks!
@rowdyroosterartisanmeats5068
9 ай бұрын
Hey Eric, Was that third video ever produced? i just bought a handful of these and was looking forward to hearing what you had to say about how the Govees can help regulate the cooling and humidifying units.
@2guysandacooler
9 ай бұрын
I'll get one made. Celebrate Sausage Season 4 happened, and I got back logged😅
@user-hm2sr4qn7q
Жыл бұрын
Eric, I am having the same issue as Marksabota4056. I cannot get inkbird and govee to match and I have calibrated both.
@user-hm2sr4qn7q
Жыл бұрын
I do live at 4850' above sea level
@2guysandacooler
Жыл бұрын
They rarely do. You don't need inkbird to match. If your Govee is calibrated, then use it to control your devices. For instance if the govee reads an average of 77% and your inkbird is set to 80%. Increase the inkbird to 83%. Does that makes sense?
@user-hm2sr4qn7q
Жыл бұрын
@@2guysandacooler It does! Thanks Eric
@troyshankles4747
Жыл бұрын
Eric do you have a turkey sausage recipe? Preferably something simple
@2guysandacooler
Жыл бұрын
You can take any of my chicken recipes and use turkey instead. The Italian chicken basil sausage was awesome!! To answer your question though I do have a few turkey recipes. Turkey Bologna, Turducken Sausage, Turkey salamini, and a turkey hot dog
@marcelodim9762
Жыл бұрын
@@2guysandacooler Hey Eric, would you ever do an Argentinian Blood Sausage video? Thanks for all you do.
@2guysandacooler
Жыл бұрын
Blood sausage is where I draw the line. No blood sausages on this channel
@marcelodim9762
Жыл бұрын
@@2guysandacooler thanks anyway
@georgesevelle8778
Жыл бұрын
@@2guysandacooler
@toolisgod6
Жыл бұрын
My calibration setting is grayed out and won't let me adjust. Anybody know a fix?
@reynolds19k
10 ай бұрын
Delete the device, reset the device and then reconnect it, once you reconnect it you should be able to load the settings window, make sure the device is within 2 meters of the phone and give it about 3 to 5 minutes, once it loads the internal settings it will allow you to adjust as needed. I use these devices in an extremely humid environment (95 to 100%) and have to calibrate them about every 6 months, they sometimes lose their minds and I've found that this process always brings them back to me. If that doesn't work, you can contact their customer support, they have always been good to me, hopefully they will be good to you.
@N8O-cw7jx
Жыл бұрын
How the hell are you claiming your eyeballing of the mix being subjectively "wet sand look" somehow confirms ~75%?? Please show or link your sources or math please.
@N8O-cw7jx
Жыл бұрын
Oh okay nevermind. These are culinary context bs-rough numbers ACCURATE enough to acheive the culinary goal. Not an actual calibration protocol for PRECISE calibration of the hardware.
Пікірлер: 31