I had previously drilled holes in my burn barrel with very limited results. I found this video and now my burn barrel is an absolute incinerator. Thanks for sharing,
@MRantzWI
5 жыл бұрын
Thanks for the video! Previously I really didn't give a s*** when I made my burn barrel, but this time I actually took the time and followed your advice. Burn five small bags of garbage in there, I swear to God that thing looked like a jet engine!! Thanks for taking the time and posting the video.
@createmomentum
2 жыл бұрын
Made my first burn barrel today using your instructions. It works awesome. Thank you for sharing.
@jetstream123
7 жыл бұрын
Made one per your instructions. I have had probably 6 or 7 burn barrels and this is by far the best one.
@mijemumijemu4466
4 жыл бұрын
Where can I buy a burn barrel? Or even just the barrel?
@stephenclarke145
7 жыл бұрын
Thanks, brilliant video and works great.
@NorthwoodsAcres
6 жыл бұрын
Thanks for the tutorial. I need a new burning barrel!
@ghoward912
7 жыл бұрын
People make things too complicated. Grab an axe lay the barrel on its side whack a few holes around the base for the air flow. Turn it upside down and whack a hole in the bottom for drainage. It's that simple!!!
@Dan-oz4qb
5 жыл бұрын
A few rounds with the 45 works too.
@edsock8932
2 жыл бұрын
I actually use 357 rounds at 10 yards.
@itssinkingin
6 жыл бұрын
Thanks for the info.
@CAMPFIRESKY
7 жыл бұрын
I will be doing this - THANKS - Might want to add a few holes in the bottom for drainage.
@NanaimoTimberwolves
7 жыл бұрын
yes, drainage for sure
@Loftikaz
4 жыл бұрын
Are the holes necessary what if i just want flames for photography reasons not need fast burning or anything
@timwicks3924
4 жыл бұрын
You will need some sort of holes on the bottom where air can be drawn in.
@p47thunderbolt68
6 жыл бұрын
Made holes with my Glock
@joint5269
5 жыл бұрын
P47 Thunderbolt Ooh so kool
@torreyintahoe
2 жыл бұрын
ghetto gun
@thelastengineer2315
5 жыл бұрын
Add a leaf blower to the mix chuck a lid on it and a chimney.
@HK-qj4im
5 жыл бұрын
I thought you were making it way to diffacult.. Until I saw the results. That vortex should burn up the shit pretty good.
@torreyintahoe
2 жыл бұрын
Check out some other peoples' methods. They get WAY more complicated than this.
@SuperPeter05
6 жыл бұрын
So get an axe, make 6-8 holes in the bottom of a barrel. Each time u slice the barrel make a 30deg+/- turn on the axe handle to twist the hole. Do each in same direction. Dont use best axe u have, old axe.
@Nightl3lade
7 жыл бұрын
wow just punch some holes in it, the fire doesnt give a shit if they are equally spaced, but good job nice video.
@frederickanthony1965
4 жыл бұрын
You right..
@frederickanthony1965
4 жыл бұрын
That guy is a boZo
@tonygaines15
4 жыл бұрын
@Mark Peterson I used "punch some holes in it"..... I made one like this some yaers ago..... night and day! If you want a barrel to keep you warm....this ain't the one. If you want a barrel that'll burn it up as fast as you can load it in.....this is the one!
@thutch558
6 жыл бұрын
👍
@battambangscooterandmotorc460
3 жыл бұрын
Alright. Uptight and outasight from Cambodia via Victoria getting ideas for burning tons of plastic. Bad shit but gotta be done. No eviro rules here yet as we're 50 years behind.
@uhjohnny_6066
6 жыл бұрын
Are you Canadian
@justnoted2995
2 жыл бұрын
Yep, listen to the pronunciation of 'round and about' :)
@netnaimo
8 жыл бұрын
I tried this with my barrel but the whole think just melted...
@brianbradburn
7 жыл бұрын
Did you use a plastic barrel?
@netnaimo
7 жыл бұрын
Damn plastic!
@TheChocolatealize
6 жыл бұрын
netnaimo
@TheLittlered1961
7 жыл бұрын
Your wife still talking to you after you used sewing tape?
@NanaimoTimberwolves
7 жыл бұрын
lol, got in shit for that one.
@phatrides222000
6 жыл бұрын
pretty sure you don't need to be that precise. Just wing it.
@mortgagefinancing5558
7 жыл бұрын
Why the angles ?
@HK-qj4im
5 жыл бұрын
Makes that vortex. The air turning...
@gregoryvirga3462
3 жыл бұрын
Wtf?! What is what the stuff he doesn't need? Lol. "I rented a hydraulic lift. Turns out I didn't need that either. Also a sandwich that's been in my freezer since '72. Turns out you don't need an old sandwich to make a hole." Lol
@jennym.9099
7 жыл бұрын
Why are people saying "I'n" instead of 'I'm"? Seems in alot of videos people are doing this making them sound grammatically challenged.
@vincentlawrence677
6 жыл бұрын
Speaking of grammatically challenged..it is A LOT, not alot.
@keithmacmurray5423
4 жыл бұрын
Or just put things in it and burn them.
@derickderidder7785
2 жыл бұрын
Camera is too far
@torreyintahoe
2 жыл бұрын
You're crazy to run a grinder on steel with no hearing pro and you seriously don't have a tape measure and borrowed your wife's sewing tape? LOL
@Vofact
5 жыл бұрын
right.. too complicated.. Another post simply said drill 10 -15 holes..3-4 on the bottom and the others around the sides..... just letting air in right??? Geesh
@tonygaines15
4 жыл бұрын
That's cool if your using the barrel to keep you warm.... But, your burning stuff to get rid of it....trash, wood, etc....this style is a true incinerator....burns super hot/fast!
@mijemumijemu4466
4 жыл бұрын
@@tonygaines15 where can I buy the barrel?
@tonygaines15
4 жыл бұрын
@@mijemumijemu4466 I get them from a local building supply store. Ask around... shouldn't be too hard to find.
Пікірлер: 57