You have to measure with a camber gauge to make sure both sides are the same.
@boostedsamuari7436
4 жыл бұрын
How did u remove the screw and put it in the closer holes? Mine are in the stock holes and I can’t get the Allen wrench in there to un tighten them to move them
@Questchaun
4 жыл бұрын
You gotta drop ya shock. Also this dude hella fucked his tires up.
@boostedsamuari7436
4 жыл бұрын
Questchaun why U say that 😂
@waybach
4 ай бұрын
@@boostedsamuari7436bc he will get crazy inner wear. I know bc I had mine maxed out like this and brand new tires were thrashed after 10k miles
@oclaothug69
4 жыл бұрын
Did you need alignment after adjusting your camber plate?
@wowed1659
Жыл бұрын
Reccomended to get an alignment I mean it ain’t the biggest deal I would get the coilovers and adjust them to what I want and then get alignment. Don’t think you need a alignment if you adjust them again after that.
@kazouavang3472
4 жыл бұрын
How many degrees? Only camber adjusting ur coilovers?
@mateoalzate1738
2 жыл бұрын
im planning to get some Blue street coilovers kit for my jetta SE 2014, somehow is lowering on the drivers side.. bumper is scraping on the road at bumps and high rpm.. the Blue street coilovers notes says.. it does not have camber plate adjustment and non adjustable damper... will i still be able to obtain stiff suspension and look low profile at the same time??
@PedroCruz-lw3cs
3 жыл бұрын
It has to be carried for alignment later, or not ?
@Orelionsworkshop
Жыл бұрын
Yes, as soon as you touch the camber, other values changes.
@jesseandrewofficial1599
5 жыл бұрын
Did u take it to the alignment shop right after??
@Lunatikkvlogs
5 жыл бұрын
Na but i think you should have 🤷🏽♂️
@theraven507
4 жыл бұрын
Lunatikk Full send haha
@altraveling7019
Жыл бұрын
Bro I took the screws out fully and now can’t line up The holes fml
@klumtheultimate7046
5 жыл бұрын
Is each line a full degree?
@Lunatikkvlogs
5 жыл бұрын
Saucy Sausage I’m not sure but i read online somewhere that it was supposedly .5 degrees each line.. meaning that the max is going to be 3 degrees
@kazouavang3472
4 жыл бұрын
@@Lunatikkvlogs how did u camber ur rear?
@Lunatikkvlogs
4 жыл бұрын
I didn’t, its natural camber
@oem_spec
2 жыл бұрын
@@kazouavang3472 u need camber arms for rears
@stateboy80892
4 жыл бұрын
KDM bro 😁🤙
@dominicjordansalon3589
4 жыл бұрын
What spring rate?
@xLudotheox
4 жыл бұрын
Hey man just wondering how are these coilovers stiffness wise as I'm looking to buy some but worried they will just be stiff for everyday driving
@Lunatikkvlogs
4 жыл бұрын
They are very stiff lol but i got use to them.. it really depends on what spring rate you get them. the higher the spring rate the stiffer.
@xLudotheox
4 жыл бұрын
@@Lunatikkvlogs yeah I email BC and they said that for a smoother ride about 1kg off back and front should be smoother but not sure if better off mca street essentials
@matthewjasperson4764
4 жыл бұрын
I love my bc coilovers, I went from a softer than stock ride to pretty stiff all based on my own preference. That's the great thing about adjustable, tailor it to your liking.
@pableezy2oh9
2 жыл бұрын
Remember that you can adjust damping setting for a smoother ride
@pukino99
4 жыл бұрын
You didn’t have to replace sway link?
@Lunatikkvlogs
4 жыл бұрын
Nope i didn’t
@jersonmancebo7453
3 жыл бұрын
There’s no camber in the back with bc
@Lunatikkvlogs
3 жыл бұрын
Only the fronts
@velosterturbo1493
3 жыл бұрын
I did exactly everything and nothing changed I’m also on bc racing
@tossingchairs4460
3 жыл бұрын
you have to take the wheels off for a actual adjustment this guy is a complete joker
Пікірлер: 36