Thanks for all the support! If you’re enjoying my videos and you would like to help out so that I can make even better videos, check out the link below! www.paypal.me/RiggsGarage
@gabrielbernardino3085
9 ай бұрын
Where is the link for the sensor?
@byronakahazard
6 ай бұрын
Where is the link for the sensor
@josephmathieu6351
6 ай бұрын
@@gabrielbernardino3085yby y GJ ggggnnnnnnnñmy9😊😊 654 🎉😢 v C😊😊😊😅😅q
@RiggsGarage
6 ай бұрын
@@byronakahazard should be in the video description
@cliftonr4445
4 ай бұрын
I am getting this code P2627 1/1 $09 Generic 02 Sensor Pumping Current Trim Circuit Low Bank 1 Sensor 1
@1yoan3
4 ай бұрын
Cars drive me crazy. If I had the money I would never bother fixing it myself, but I'm homeless and sleep in my Honda Odyssey 2008 that I got from a junkyard. I have no choice.
@lanpanthet
2 жыл бұрын
May God bless you and your family bro, may God give good health and protect u and your family.. Amin
@RiggsGarage
2 жыл бұрын
Thank you! He has so far
@ryanalderman6894
3 жыл бұрын
Great video . I have a 05 that did same thing . I replaced the entire spool valve which that oil pressure sensor came on . And it fixed it. I got the spool valve new for a great price off Amazon. Thanks again
@RiggsGarage
3 жыл бұрын
Thanks for watching! I'm glad you got it working right
@beastmode6134
10 ай бұрын
Super thankful for this video, I had the exact same issue and solution. My oil pressure sensor somehow didn’t have an o ring at all. Installed one and the car is back to running perfect.
@hashewcashew
Жыл бұрын
You’re amazing!! Thank you for being so detailed and helpful with price!
@RiggsGarage
Жыл бұрын
Thank you, happy to help!
@ayearetee3342
2 жыл бұрын
Awesome video I even liked the quick recap at the end. SUBSCRIBED!
@RiggsGarage
2 жыл бұрын
Thanks! Appreciate the kind words
@MylifeMB
2 ай бұрын
I don't know if this will help anyone but I was able to fix constant P2647 and going into limp mode (after oil change) by disconecting negative battery and turning the key and headlight on to drain capacitors, after that I let the van idle relearn for about 15 minutes turned it of for about 30 minutes and started right up without the code coming up drove it around no codes.
@RiggsGarage
2 ай бұрын
That's good news. Let us know how long it lasts or if it fixes the issue permanently? Thank you
@MylifeMB
Ай бұрын
@@RiggsGarage ended up replacing the whole vvt solenoid/oil sensor with a new (cheap) aftermarket after my initial post here because the vsa/limp mode just kept turning on the next few days but then the check engine and limp mode after a couple miles during test drive, came back also and so I did the whole disconnect battery again to clear codes even though battery was disconnected during installation of new part, not sure what was up with that, kinda scared me to think it was something else, but ever since the replacement and disconnected battery once during installation and once after test drive I have not had any issues for about 300 miles now. I did put a cheap "vcm muzzle" now after confirming that the new parts worked good and eco mode was running smoothly, after testing the old oil pressure switch/sensor with voltmeter it showed open line so it was definitely the failed part.
@RiggsGarage
3 жыл бұрын
Leave me a comment if this video helped you make that family truckster work!
@Laurenkobida
Жыл бұрын
Yes thank you thank you . If only you could show me all my fixes . Love learning
@kalvykalv
3 ай бұрын
I just got a 2007 odyssey that has this issue so I will try all of the solutions and see how it works out
@franciscozabalaga4871
3 жыл бұрын
didnt fix the vsa but the car run a lot better, thanks
@meld6728
8 күн бұрын
Code disappears after turning the car off. And code reader does not see any code. But driving after a while VSA light comes out. Code reader specifically says I should not put reader when car is running. What should I do?
@rebeccabongo1350
3 жыл бұрын
Hi hun, I had to jam on the brakes and heavy traffic and ever since then the VSA and the Little triangle comes on. I'm watching your videos and they're incredibly helpful. But if you've come across that. Or anything like that shoot me a message. Because I asked all kinds of questions so I can understand. I've had a couple of strokes so that's why I have to ask so many questions. Thanks again hun
@RiggsGarage
3 жыл бұрын
Hi! Thanks for watching! I have not messed with that system of the car - that's your traction control acting up I believe. Definitely something a mechanic should look at asap as it can get you and others hurt or killed.
@arabcampers9554
2 жыл бұрын
Hi Rebecca Did you solve the problem ? I had the same problem harsh brake and vsa came out after .
@TheOGJeff
2 жыл бұрын
Would also like to know any updates. My mother's car has it as well after going over a bad dip
@shawnp8076
25 күн бұрын
Anyone figure out the fix for this?
@devenp2069
2 жыл бұрын
Appreciate the knowledge/experience sharing. Great info and thank you for the llinks.
@RiggsGarage
2 жыл бұрын
Thank you !
@spyder53247
26 күн бұрын
I've had a P2646 on my 2010 Acura TL for the past 5+ years. I clear the code and just keep the RPM's down below maybe 4500-5k and its fine. The car never goes into limp mode, and runs perfectly fine. Since then I've changed the oil when its due (probably 7-8 times now), never any sludge issues, and its never run low on oil. A month ago the car threw a "Check VSA system" light on my dash, and the P2646 code came up in the back ground, but the check engine light never came on with it. That being said, I cant clear the VSA light or the P2646 code now.. Since the beginning of the rocker arm code issue started, Ive change the VVT solenoid assembly 3 times (new oil pressure sensor, screen and oring came with it every time with a factory Keihin part), and tried to change just the sensor once separately. Every time I could pull the car out, go down the road, let it rev and the P2646 code gets thrown every time.. I dont know what else to do. My car is now up for inspection next month, theres no check engine light, but the P2646 code comes up when its checked from the OBD2 which will fail me. What gives?
@docentjoel
8 ай бұрын
Outstanding. My daughter had been sideswiped and the VSA light / engine chugging started happening right after. We thought it had to do with the wreck, but after searching KZitem and finding this video, my daughter fixed it in 10 seconds. Oil was very low, she added two quarts and voila! problem solved. Thanks for clearly explaining what is going on.
@RiggsGarage
6 ай бұрын
Low oil is a big thing to watch on these vans. I'm on my second Honda van like this, they have all eaten oil. It is from the VCM system, make sure you disable that system if you can. I'll make a video on it soon!
@Ophilia535
Жыл бұрын
27mm socket wrench was the correct size to unscrew the sensor in case anyone is wondering.
@RiggsGarage
Жыл бұрын
Thank you
@Ophilia535
Жыл бұрын
@@RiggsGarage No, thank you!
@ShikyoGryfyn
Жыл бұрын
My 2.4l k24 had a vsa check engine light combo and I turned off the car and restarted it and the vsa went away, but the check engine light stayed
@RiggsGarage
Жыл бұрын
Check your codes and see what's going on
@nurulmonin9476
3 жыл бұрын
Hi I've Honda Odyssey exel 2006.. recently I change the motor mount after change engine vibrating when it is idle. Could you please tell me what the issue..
@RiggsGarage
3 жыл бұрын
Are there any check engine light codes? Could be a number of things. Misfire, foul plugs, ignition coil pack malfunctioning. I would check engine codes and go from there. Thanks for watching!
@nurulmonin9476
3 жыл бұрын
@@RiggsGarage Thanks for reply.No there's no check engine light. I was wondering it could be motor mount. I just gues.
@nothingfree3524
3 жыл бұрын
Had to replace oil pressure sensor on 2007 odesssay , didn't know where it was so went to garage and that mechanic found where it bongs and go him to replace it gonna cost $400 ! Plus laborr ! Then looked on internet auto zone $175 and ather places 200 or more and then found for $ 10 ! Bought that and put in and noore problem ! That was over a year ago and still working fine ! So shop around !
@RiggsGarage
3 жыл бұрын
Heck yes, shop and keep your money for other stuff. Thanks for watching!
@peppytrabonco
2 жыл бұрын
I have a 2007 Honda Ex-L what is the part number?
@nothingfree3524
Жыл бұрын
@@peppytrabonco just look up part and they basically are all the same from 2005- 2010 some places way overcharge and all have to due is find the price dat fits I got the part from Carparts on internet or since they rarely goes out I wented a head and spotted three more at junk yard and gots dem in tool box fur waininy day !
@joecox9958
3 жыл бұрын
Thanks alot! but from honda parts the correct sensor is 37240-R72-A01 not 37260-PZA-003, at least for 08 odyssey LX. also it would M10 so you can select O-ring. Honda sensor is
@ThatModernMombie
Жыл бұрын
My 07 Odyssey is doing this exact issue. Thanks for the advice! I really thought my rocker arm was broken and that would have been more than i could have afford.
@RiggsGarage
Жыл бұрын
Hope that's not broken! See if you can repair it yourself
@ThatModernMombie
Жыл бұрын
@@RiggsGarage It was just an oil issue. I had no idea it could throw that particular code. The more you know! Thanks again!
@RiggsGarage
Жыл бұрын
@@ThatModernMombie you're welcome!
@noahholliday9761
Жыл бұрын
@@ThatModernMombie I'm guessing your VTEC solenoid gasket was leaking oil onto your alternator??
@pablocortez289
Жыл бұрын
Thanks for the video... replaced the oil pressure sensor and the VSA light has not come back. There was no o-ring on the one I removed; hondapartsnow shows a 13x1.5 mm o-ring, so I ordered one and it seems to large. Still put it on but I don't really think it needs one. Anyhow, all good now thanks.
@RiggsGarage
Жыл бұрын
Good to hear, keep that thing on the road!
@juliacleveland
6 күн бұрын
Can a mechanic make the light come on intentionally?
@moustafaelsheikh
2 жыл бұрын
Appreciate the knowledge/experience sharing. Great job. Thanks
@RiggsGarage
2 жыл бұрын
Thank you for watching!
@paniagua6650
3 жыл бұрын
Will this work for my 2011?
@RiggsGarage
3 жыл бұрын
I am unsure of this
@paniagua6650
3 жыл бұрын
@@RiggsGarage ok thank you
@Kenyo-fu1hy
2 жыл бұрын
Thank you, you helped me a lot with this video!!!!!!
@RiggsGarage
2 жыл бұрын
Glad to hear, thanks for watching!
@bobbysmemes2.052
2 ай бұрын
i have the same exact vsa issue on my acura tl 05 would this work on it too?
@RiggsGarage
2 ай бұрын
Possibly, this video is for a 3.5, but the TL has a 3.2. but both engines are J series, worth more research and a try
@edgarpena6810
Ай бұрын
Great video very helpful but the code p2646 / 2647 is not for the vsa, i have the same problem and with your video I fixed the p2646 the vsa is about the speed sensor, abs, etc
@TheDjp198
8 ай бұрын
THANX HOMIE !!!! U SAVED ME A LOT OF BREAD!!!
@RiggsGarage
8 ай бұрын
You're welcome!
@salsa29erlove
2 жыл бұрын
The o ring size u need is 13x1.5
@RiggsGarage
2 жыл бұрын
Excellent thanks
@johnk12345100
Жыл бұрын
On the sensor, does the O-ring go around the actual screw part that screws in or does the O-ring go around the Silver Ridge that looks about as big as a half a dollar? Thanks
@denisparanormal2790
3 жыл бұрын
Thank for your help they sensor is 35$ now
@RiggsGarage
3 жыл бұрын
I just searched the part number 37260-PZA-003 and its under $20 in several instances, thanks for watching!
@johnk12345100
2 жыл бұрын
Great video thanks hope you're still monitoring this, does that o'ring fit around that lifted section? Probably a stupid question but, I got a couple from Lowe's that seem to fit around it and tighten it, it still happens though when the car gets really warmed up it'll come on and give me that signal, thanks
@RiggsGarage
2 жыл бұрын
Hey there lowering fits tightly around the threaded section of the sensor. Let me know if that makes sense
@johnk12345100
2 жыл бұрын
@@RiggsGarage sorry but still confused, so there is a ridge on the round cylinder part, are you saying that it fits around that Ridge, the ridge is probably 30-second of an inch high in the size of the quarter, so the o-ring goes around that correct? I tried to send you a picture with a highlight but it won't let me hear
@lorettaverbanic5039
Жыл бұрын
Semi sharp turns seem to be causing my VSA warning indicator to come on, vehicle goes into limp mode and engine shakes…it’s a 2006 odyssey with 106,000 miles and I have it serviced at dealership where purchased. I only drive 5,000 miles/yr…really worried that dealership will take advantage of situation. Any ideas…haven’t tried autozone yet for the reader and codes but sure don’t see any similar situations in the comments. Thank you.
@dfields9511
Жыл бұрын
could installing a SVCM Controller also fix issues, ( VCM Delete )
@allanfranklin9615
5 ай бұрын
This video found the easiest possible repair. What's the next area to check if this isnt the problem?
@stophatecollaborate5419
2 жыл бұрын
Well figured out the main issue the VVT oil pressure switch was faulty reading 43 lb of pressure at the VVT spool ( located on the rear head driver side on the 05 on Odyssey) I overlooked it because I assumed more pressure is good lol not for a Honda. My van has 275,000 miles the VVT has never really worked properly since I've owned it a little over a year and it had okay power not very good gas mileage though. It had a severe oil leak coming from the front and rear valve cover so I replaced them did a valve lash, replace spark plugs let me tell you something this thing runs like it's brand new VVT worked excellent how about 2 days check engine light came on O2 sensor bank 1 which still ran perfect not the best gas mileage and the VVT was not working anymore but did not throw a light, not quite sure if it's just a fluke and went bad or if I overlook plugging something back in maybe a ground wire mind boggled about to start ripping back into it. I do not like the way it runs when the VVT turns on and burns oil so I'm going install a 87 ohm resistor at temperature control sensor to trick the ECM
@marineabc1
3 жыл бұрын
VSA light: It came in my wife 2007 Honda Odyssey twice on long distance trips. What bother me the most was the cruise control disengages. I was really pissed.
@RiggsGarage
3 жыл бұрын
Yeah, cruise control is a must on the long distances. Did you fix it?
@marineabc1
3 жыл бұрын
No not yet. I happened on 1,100 mile trip to Florida in June & it just happen on a 120 mile trip I took today. Today's trip reset OK. I wonder if it could be the oil pressure sensor or the dash switch if self? It seems to be related to long distance driving.
@RiggsGarage
3 жыл бұрын
Definitely need to check the code
@mirzaabbass
Жыл бұрын
I have honda odyssey 2007. I am getting exact same issue with VSA light and sometimes oil pressure light flashes. I went to a mechanic for scan. he found code P0344, P0304, P0305. I am not sure what I should do. I went to couple of mechanics - some of them dont know what the code means.one guy suggested to change timebelt (not sure if that helps) which cost $1000. please advise.
@RiggsGarage
Жыл бұрын
The timing belt is just a maintenance item, it has nothing to do with the codes. Certainly change it if it has been over 100,000 miles or is looking worn. If it breaks, none of those codes will matter ☠️
@jonathanparraleal8464
Жыл бұрын
I got the VSA light after changing the front brakes. Does that light comes out also for brake fluid low pressure?
@MarkCastillo-c6c
Жыл бұрын
So quick question I have a 2010 honda odessy but I notice I don't have no power at times I put it in drive it do not move and in reverse it do not move I would have to shut it down then start it back then it move but after I little drive the power go's again
@williamsmith8760
10 ай бұрын
Which o-ring fit. Does it contact just below the threads or around the next level down.
@zorxhiio
8 ай бұрын
Te agradezco hermano. En vdd hice todooo lo que tu hiciste. Limpie el vtec, cambie sellos, cambie el sello de la base de aceite, y sigue igual. Ya mande pedir la pieza. Espero sea eso
@downforwhatever67
Жыл бұрын
We disabled VCM on our 2010 Honda Odyssey. We stopped consuming oil and we saw zero impact on MPG. We get 20.5 MPG average. 157,000 miles. Recommend disabling VCM on the 3.5. Thanks for this tip. I’ll know where to look if I get this issue.
@RiggsGarage
Жыл бұрын
We literally just bought another Odyssey with 150K a couple weeks ago and I just disabled the VCM. 100% recommend
@manuelabreu2432
Жыл бұрын
How do you disable the VCM
@RiggsGarage
Жыл бұрын
@@manuelabreu2432 Google VCMuzzler, it's a product that just tricks the ECU into thinking the engine is not fully warmed up so the VCM does not engage. It's a 5-minute plug and play install. I guess I should make a video!
@bibianacortez3779
Жыл бұрын
@@RiggsGarage did you make a video for the disabled VCM .?
@RiggsGarage
Жыл бұрын
@@bibianacortez3779 I have not, I will try to get one out in the next week
@abigailcollins35
Жыл бұрын
youre a gem. God bless you🙏🏿
@RiggsGarage
Жыл бұрын
Thanks! He has
@wendellstutzman4918
2 жыл бұрын
Dude you’re very helpful!
@RiggsGarage
2 жыл бұрын
Thanks for the kind words, appreciate it!
@cdotson0027
Жыл бұрын
How's that amazon part holding up a lot of the other ones are expensive
@susanafromindiana7463
2 ай бұрын
Replaced everything including the spool valve! Runs fine for a day or two then the same problem, had oil leak on valve cover, replaced it and plugs while I had it apart.scrubbed intake manifold, Checked oil pressure, thats fine! I think the problem is bad PCM ECM. There is a update for PCM. the real problem is the design and Honda keeps pushing this same issue out the door knowing full well the problem with this engine for profit..
@RiggsGarage
Ай бұрын
I am on my third, 3rd generation Odyssey and I am very sick of them. They can be great and they can be terrible. Probably going to buy a Chevy suburban next for the family
@jaywalker3553
3 жыл бұрын
Thanks bro ☝🏽☝🏽☝🏽
@roadking99jokerst60
6 ай бұрын
Get the Mustang on the road ! We want to see it.
@RiggsGarage
6 ай бұрын
On the lift right now getting work put in. I'm doing all the steering and ball joints. They were all trashed originals
@northfloridamobiledetailin2606
3 жыл бұрын
Your channel is helpful, thanks
@RiggsGarage
3 жыл бұрын
Thank you 🙏
@cdotson0027
Жыл бұрын
Could the vtec solenoid and oil pressure sensor on the other side also be causing these kinds of issues?
@tp7061
8 ай бұрын
Hello, I bought this van used from a family member. The vsa light and engine light have been on since I purchased. Currently the car will turn on but only stay on for a few seconds. Leading up to this the problem was the engine was starting to go slower and die. Have you had this problem? Its a 2009
@RiggsGarage
6 ай бұрын
I have not, hopefully you are able to figure it out?
@BrandonSalas-us8mm
8 ай бұрын
A crescent wrench how dare you? That’s almost more upsetting than reusing the O-rings or getting vital and sensors off of Amazon why don’t you just go to the junkyard and get a OEM one off a decent looking engine for clean oil, clean rocker arms and just swipe it come on bro get with the program 20 bucks savedis 20 bucks not spent 20 bucks not spent 20 bucks saved spend your money on O-rings instead
@RiggsGarage
8 ай бұрын
If a crescent wrench doesn't get that sender off with zero drama, then God help you LOL Pick n pull is 30 mins away and minimum 2 hour trip during work hours, amazon prime appears on my doorstep next day. Easy choices. But what you say makes sense, I just did something different because there are so many ways to do life
@PlamedieLukwele-wo5pj
Жыл бұрын
Comment fixer cette problème de lampe vsa en français svp
@Steef12
3 жыл бұрын
Do you remember what size o-ring you used? About to try this fix on my 2006 Honda Odyssey EX-L.
@RiggsGarage
3 жыл бұрын
I do not know the specific size, I have a random o-ring set that you can get at the auto parts store that has a bunch of different sizes. I compared what I had to those and just made sure it fit like the original one did. Thanks for watching!
@Steef12
3 жыл бұрын
@@RiggsGarage Ah. Thanks for the help. I found an o-ring kit at Lowe's and just finished installing the new sensor and o-ring. The closest o-ring I could find in similar size is a little bit thicker so hopefully that doesn't matter and hopefully my issue is resolved.
@lard1892
Жыл бұрын
VSA (Vehicle Stability Control) light comes on anytime the engine is not running properly. Honda doesn't like aftermarket parts, good luck with that.
@RiggsGarage
Жыл бұрын
Right, this video specifically covers a couple of codes that are in the description and the title.
@hellcatlyfesfyle7111
3 жыл бұрын
Thanks for your help it was a blessing changed oil great now
@RiggsGarage
3 жыл бұрын
Glad it helped! So you just changed oil and did not replace a sensor or O ring, right?
@rangel6242
3 жыл бұрын
Good video but there are many things that can cause the VSA and check engine to come on. I have a 2007 Honda Odyssey and have this persistent problem. VSA, Check Engine and vibration. Oil and filter is new. Transmission fluid clear and new, new battery, new Denso alternator, new rack and pinion, new administrator arms, new power steering pump, new serpentine belt, new shocks and struts. I am going to get the codes checked again. First time, no codes came up. Friends are suggesting oil treatment. My car has 186,000 on it. I have a lot of money into it and don’t want to give up on it. I have had prior alternator issues and finally just put in a Denso. No more battery light coming on. But after 30 to 40 minutes of driving, the VSA and Check Engine light come on and I get light vibration.
@RiggsGarage
3 жыл бұрын
Thanks for watching and commenting. You're right, there are lots of things that can make VSA come on. Once you get the codes read I should give you a direction to go. For example, cleaning the Vtec screen.
@rangel6242
3 жыл бұрын
@@RiggsGarage took it to Auto Zone today and once again ..... no error codes. It’s a true mystery. I am changing out the spark plugs tomorrow and crossing my fingers. I read somewhere that it could be the catalytic converters. Let’s hope not.
@RiggsGarage
3 жыл бұрын
I seriously doubt it's the spark plugs. I'd recommend not throwing parts at it and taking it to a shop that has a scan tool. That would be a more advanced scan tool than what is at AutoZone that can read all parameters of the engine operation, with no codes thrown
@rangel6242
3 жыл бұрын
@@RiggsGarage thank you...I needed to hear that. I’m going to try Aamco transmission.
@rangel6242
3 жыл бұрын
@@RiggsGarage Greetings... I took it to Aamco and they got a code. P2646/control valve rocker stuck. So I looked it up and understand now what is happening. Here is some history that will surely help...I did go too long between oil changes. I had it changed two weeks ago...obviously the CEL never went away. The CEL is triggering the VSA and limiting the rev to 2500 or under. I have disconnected the battery several times, and the CEL keeps coming back. I recently had the gasket replaced (5 months ago) at the oil filter mount bracket..that was leaking. There is no screen on this gasket, so there wouldn’t be a clog there. My guess is that the oil viscosity and/or low oil at one point triggered this CEL. Any suggestions you have will be highly appreciated. Thank you again. 2007 Honda Odyssey EXL 188,000 miles More: it has an “a” after the code and before the stuck rocker arm actuator. This means “bank 1” . One explanation is that it may be due to a voltage signal back from oil pressure switch. I got the CEL warning sometime after buying and installing a defective duralast alternator. Kept getting battery light. I just replaced it with a new Denso.
@ishtiaquemahmood7815
Жыл бұрын
Mate my civic 2007 is showing VSA on and engine light flashing. Diagnosis is showing p303, I put bad fuel and after that the VSA light came up. Mechanic said gasket is ok compression is fine but he found a bit of oil with the spark plug. No one could really figure it out.
@RiggsGarage
Жыл бұрын
Not sure on the civics, I have only messed with VSA on Odysseys.
@christiholt7980
2 жыл бұрын
I have a 2006 Honda Odyssey and my VSA light came on. All I did to get my VSA light to go off was change my oil. Hope this helps someone. The guy at the garage I took it to, told me that oil change has nothing to do with it but I told him to humor me do it anyway and it’s now off.
@RiggsGarage
2 жыл бұрын
This is great news!
@raulorivers4
3 ай бұрын
thanks for sharing! i owned an used 2009 odyssey and i am getting tired on all the problems that its being giving me
@RiggsGarage
3 ай бұрын
Thank you. I'm on my second van of this generation and ready to punt it 😂
@jameskim62
3 жыл бұрын
To back I did not see this video. I had the exact same issue. I had Engine check light, VSA, ABS, Airbag, Error code P2649, P0962, P0966, 0970, 0962, P0966, P0970. Honda dealer said the issue was bad ECU ground. They did not want to explain in depth What causes it. I don't think it was ground.
@RiggsGarage
3 жыл бұрын
What ended up happening?
@anacoyle5407
5 ай бұрын
Hoping this fixes my issue fingers crossed
@BrandonSalas-qm5vu
7 ай бұрын
Bet the Honda part has a new o ring
@RiggsGarage
7 ай бұрын
Probably
@katelynnmantz550
2 жыл бұрын
Our CRV has all this except 3500 rpm’s. Ours is 2800. Anything past 2801 it jerks once in limp mode
@RiggsGarage
2 жыл бұрын
That's not fun, hopefully you get it fixed!
@carlypetrovich1692
Жыл бұрын
I have this issue plus white smoke. No indication of a blown head gasket or overheating. Any ideas?
@RiggsGarage
Жыл бұрын
I mean white smoke is almost always a head gasket or coolant getting into combustion chamber somehow. I would dig into that before you mess with the VSA issue. Is the van losing coolant? Is the oil foamy? This needs investigation
@noahholliday9761
Жыл бұрын
So what if the vsa light goes off due to the VTEC solenoid gasket leaking oil onto your alternator, and causing the alternator to fail? Please tell me the easy fix for that. Considering the vsa light can go off for something so simple as low tire pressure, and voltage deficiencies there's almost no easy fix except for this specific scenario...
@RiggsGarage
Жыл бұрын
Astute observation. To answer your question, the easy fix for the scenario you outlined would be to fix the oil leak and replace the alternator. There are multiple things that can cause VSA, but the codes presented in the video are the ones I'm covering here where I found this specific fix worked.
@jaywalker3553
5 ай бұрын
Where’s the link to order this
@RiggsGarage
5 ай бұрын
It is in the description of the video, thank you sir
@barrettswendsen4339
6 ай бұрын
This was a life saver, for me it was just the O ring. I replaced the sensor to no fix. What made my engine act up was extreme cold.
@RiggsGarage
6 ай бұрын
Good work!
@reaganhernandez5861
2 жыл бұрын
my crv 2008 honda, the vsa light came on and my car started jerking, what could that be, plus my dasgboard flashes sometimes esp. after it rains a lot, and when im at a stand still the car revs up from 1 to 3 and down and again over and over
@RiggsGarage
2 жыл бұрын
Pretty hard to tell, you'll need to read codes to diagnose or go to a mechanic
@trealwilliams1563
2 жыл бұрын
I have yet to watch ⌚ the rest, but the way you opened that hood bra... I am guaranteed to watch the rest. That might be how you should start all of your videos brother! 🖖🏾👍🏽👍🏽
@RiggsGarage
2 жыл бұрын
Hey thanks for the kind words, I appreciate you watching and subscribing!
@TheTruthSeeker756
2 жыл бұрын
Thanks man! I am all set to tackle this tomorrow!
@RiggsGarage
2 жыл бұрын
Good luck with it, keep that thing on the road!
@kimkaraffa7260
2 жыл бұрын
My car is doing this. It says I am 128 miles past due oil change. Is it ok for me to drive 15 miles to get oil change.
@RiggsGarage
2 жыл бұрын
Should be fine as long as your oil level is full, and as long as the engine isn't keeping you from safely accelerating and not getting hit by other cars
@rustyshakleford7002
2 жыл бұрын
If it was the o ring where was the "pressure" going out to? Wouldn't you have had a puddle under the van if that had anything to do with it???
@RiggsGarage
2 жыл бұрын
Yes, there was a small oil leak from that failed o ring connection.
@HawaiianReloads
2 жыл бұрын
My oil is black, low, thin like coffee. Lol! Just inherited from my son. Tuned it up. Was running on 3 cylinders. Smoked like crazy. Burning crud in heads. Then VSA light comes on. Thanks to your vid explaining possible low oil. Cool! I'll go add some now. And some gas... Be back with update.
@RiggsGarage
2 жыл бұрын
Yes, please change that oil!! Sounds gross haha
@toddclark5154
8 ай бұрын
Thanks! Gonna follow this and sounds right. Saved me hundreds of dollars and hours of hassle!
@RiggsGarage
6 ай бұрын
Good to hear, thank you for watching
@bobbytabrizi464
Жыл бұрын
Damn bro I watched a lot of videos about this you are very very very very good everybody else was Gilbert Gabbert much love thank you for straightforward directions and knowledge and while may I say you found out it wasn't even the part he was actually a leakage it's possible there is a crack or just needed to be sealed. I hope you have more videos
@RiggsGarage
Жыл бұрын
Thanks for watching! I do have more videos, I got another Odyssey. Need to edit, and I will send them
@ronshows4838
2 жыл бұрын
302,000 miles just changed the oil and fixed mine
@RiggsGarage
2 жыл бұрын
That's the best outcome possible, glad to hear it
@jackkurof512
2 жыл бұрын
Fixed mine wit 91 octane and new spark plugs
@RiggsGarage
2 жыл бұрын
Must have been a different issue, glad it was easy
@Alhawiti_Mohammed
21 күн бұрын
Thank you 🙏
@RiggsGarage
20 күн бұрын
You're welcome
@IAMCAKEGOD
Жыл бұрын
thank you sm for this video! This helped me sm, my old car had tranny failure so when it started sputtering that was my first fear. Now i know it’s completely different 🫶🏻
@RiggsGarage
Жыл бұрын
I hope your transmission is great, Thanks for watching!
@philthyphil2875
Жыл бұрын
You did t talk about the engine shake and what that was or how to fix it ?
@RiggsGarage
Жыл бұрын
Not following, that was the video. The vsa limp modes the engine and it shakes like crazy. The fix in my case was the sensor and o ring
@nunyabizness9045
Жыл бұрын
Mine comes on at random. It usually shuts off after about 25-30 miles. Is it anything to be concerned about?
@RiggsGarage
Жыл бұрын
Might check oil level, old oil, etc
@nunyabizness9045
Жыл бұрын
@@RiggsGarage oil level is good... Oil is clean... Maybe a short?
@octaviofuentes7781
2 жыл бұрын
Awesome we are having that exact same problem but no obd2 codes vsa light on and engine lacks on power
@RiggsGarage
2 жыл бұрын
I hope you get it fixed, thanks for watching!
@kashifsyed5443
3 жыл бұрын
What number of deep socket can be used to unscrew this sensor? I tried 24MM but it’s a bit short. Does anyone know the correct/exact size? Thanks 🙏
@ahmedembaby7040
3 жыл бұрын
Help to find where is the vsa sensor place outside the car i find the front one where is the rear one
@RiggsGarage
3 жыл бұрын
Hi there, it's on the driver's side towards the firewall, I think I show it in the video
@ashleyhaller7482
3 жыл бұрын
Did all that and my lights still on it's all brand new every thang u just said
@RiggsGarage
3 жыл бұрын
Could be a number of things - what code is the car throwing when the VSA issue happens? Did you make sure to seal the new sensor well with a fresh O ring? Fresh oil change / full oil?
@josephbon2373
2 жыл бұрын
Buenas tardes amigo, disuxlpa yo tengo el mismo problema pero ya le cambié los empaques fue lo primero q hice, después mandé pedir la pieza completa , me llegó nuevo y el problema sigue....que podría ser?? Primero con la válvula vieja marcaba el código p02646 y ya después con la nueva me marca el p02647, y se acelera hasta las 3 mil revoluciones..y se prende el check y el VSA ... Ojalá me puedas ayudar...gracias
@miguelrodriguez375
Жыл бұрын
Chequeale la manga grande de el filtro de air. Quisas tengas un cracidura.
@98gem
2 жыл бұрын
So I have a 2011 Honda Pilot Touring and I am having this same problem. My VSA, VTM-4 and check engine light is flashing. I took it to orielys and codes read I have misfires so we changed my spark plugs but problem is still happening. I took it to a mechanic and they told me since I changed spark plugs it could be the coils, we changed it and we have same problem. I took it to a second mechanic and he told me it could be injectors we changed them and same problem!!! 😭 at this point your video is making more sense than what any of these mechanics have told me. My question is do you think what you did in your video would also help me? 😭😭
@RiggsGarage
2 жыл бұрын
Sorry to hear it's been a pain. Lots of things happening here, but I would definitely stop throwing parts at it - did the codes change after you swapped parts?? Plugs, coils, injectors?
@98gem
2 жыл бұрын
@@RiggsGarage thank you for the fast response! But no codes did not change. And it still does the same thing. Shakes, I can’t drive it more then 35-40mph and all same lights are on. Check engine still flashing. I took it to another mechanic after changing my injectors and he said that my motor is basically done for but I feel like it’s a big jump from the other mechanics telling me about the prior problems that could have been.. at this point I don’t know who to listen to or what to do.
@RiggsGarage
2 жыл бұрын
@@98gem has the engine been compression checked?
@Syamhouse_
2 жыл бұрын
#BINGO! Very helpful video. Thank U!
@RiggsGarage
2 жыл бұрын
Very welcome!
@dfields9511
Жыл бұрын
thank you, 2007 odyssey EXL, same code P2647, I checked the oil, it was dark, and dirty, but the maint minder said 20% life left, I went ahead and changed it early 5w20 synth Blend high mileage Havoline and new ST6607 filter, figure why not , change it now. going to have to do that always. so changed it . not long ago changed the valve cover gaskets and intake gaskets and spark plug grommets. The initial driving, after the oil change, maybe 20 miles getting up to 45 mph or so , in town local roads no issues. Still have to keep eye on it. next step maybe that screen and or sensor / o Ring. That sensor you had in your hand I think said Denso. which I think is the OE or about the only brand I would use to to replace it.
@nitpatel007
Жыл бұрын
Thanks Man U save me lots of money to mechanic 🎉
@RiggsGarage
Жыл бұрын
You're welcome, thanks for watching!
@brittanytwohawks8243
3 жыл бұрын
Will the VSA make the van not start at all?. I am having a hard time getting my vehicle to start.
@RiggsGarage
3 жыл бұрын
Not 100% sure on this one, sorry
@rocamoca8218
2 жыл бұрын
That's a problem whit your valves your vehicle needs valve adjustment
@NTSRFR4
2 жыл бұрын
They don't come with a new O ring?
@RiggsGarage
2 жыл бұрын
They do come with one, but if you want to use your existing sensor and replace the o-ring, you have to find an o-ring for it.
@kvis101
3 жыл бұрын
Hi, Thanks for the video. I am getting the VSA light with no engine line. I get a small hesitation while accelerating from a stop (or rolling stop) and then i get power back and a bit of a surge. This happens only when vehicle is hot. I just took the Vtec Solenoid valve a part and the vtec screen has some small pieces in it - but not bad. Would you recommend changing the Oil pressure switch? I have never gotten any codes - but i am going to take it again and see if we can find any codes.
@RiggsGarage
3 жыл бұрын
Thanks for watching. I would try and get some codes from the thing, is there any oil leakage or anything from around that switch?
@alimirm
2 жыл бұрын
Hi Kevin, were you able to make the VSA light go away?
@kvis101
2 жыл бұрын
@@alimirm No. For the life of me I can't figure it out.
@alimirm
2 жыл бұрын
@@kvis101 Thanks for the prompt reply. Really appreciate it.
@MX-CO
2 жыл бұрын
Have you heard of a VCMUZZLER 2?
@tybrownsr.4466
8 ай бұрын
Thanks!
@trealwilliams1563
2 жыл бұрын
I subscribed
@georgeleyva76
2 жыл бұрын
Hopefully you still monitor this, I have 2008 Odyssey and it’s giving me the VSA with the hazard triangle. When I got it tested, the guy at told me it was a misfire in cylinder one. Thoughts?
@RiggsGarage
2 жыл бұрын
I would pull the plug on cylinder 1 and take a peek. Could be spark plug, coil, oil leak in the plug hole, compression, etc
@georgeleyva76
2 жыл бұрын
@@RiggsGarage thanks hopefully that’s all that it is.
Пікірлер: 301