How to detailed hard surface with a simple knife tool and 3D cursor trick. Like & Subscribe for more. Music: • Sigma Male Song Remix ... #shorts #tutorial #blender #hardsurface
I make detailed modeling lessons on Patreon, you can find the link in my About page!
@wizart2100
Жыл бұрын
This guy loves origin point modeling
@ArijanRace
Жыл бұрын
3D cursor is underrated
@darien_3D
10 ай бұрын
@@ArijanRace 2 true
@iulianhagea5815
10 ай бұрын
I allways use 3D cursor in my workflow.
@BECK_4D
9 ай бұрын
if you are not using the 3D cursor a lot start learning how to because it is really useful
@Blap7
9 ай бұрын
@@BECK_4D alright man
@Xanatis
11 ай бұрын
I heard the blender community was above and beyond supportive but the comments on shorts makes me seriously question it 💀
@ArijanRace
11 ай бұрын
It's ok they are still supporting my channel by giving me views and comments 📈 Check out my discord, it's s nice community there
@babaslapofficial
10 ай бұрын
Some of these comments have to be ai generated 💀
@ArijanRace
10 ай бұрын
@@babaslapofficial it's ok because hate never comes from above
@slickricky769
10 ай бұрын
Pretty sure no everyone that watches the shorts can actual do 3D so 😅
@Teh_Random_Canadian
10 ай бұрын
@@slickricky769The people here are here to learn, at least I am. This guy in general though seems to have trolls follow him and complain about his techniques on every video.
@gifdoozer
9 ай бұрын
reccomending to use a plane with a surface deform modifier so you just gotta bend the plane so it's a non destructive operation :3
@ArijanRace
9 ай бұрын
Good idea, I will try this, thank you
@bwarbahzad6397
5 ай бұрын
:3
@jtmcdole
9 ай бұрын
I didn't think I needed blender shorts in my life, but this cements it for me. Thanks!
@TylerNPTOfficial
Жыл бұрын
Damn i have alway use loopcut my entire life now it time for changes.
@ArijanRace
Жыл бұрын
Always improving 🙏
@TylerNPTOfficial
Жыл бұрын
@@ArijanRace thx you for being my inspiration the past 8 months 🙏
@ArijanRace
Жыл бұрын
@@TylerNPTOfficial 100% my friend. Join my discord if you haven't already, you can always reach me there
@TylerNPTOfficial
Жыл бұрын
@@ArijanRace I will soon
@prixplox
10 ай бұрын
Same bro, don't even know why I didn't have the idea to just use the knife
@cloudlove1
11 ай бұрын
Love it. Obvious things are always hardest.
@quinnvictor1058
10 ай бұрын
Just use a lattice or mesh warp
@ultimate205
9 ай бұрын
Using a lattice would be slower, I'm not sure about the mesh warper
@finn3721
8 ай бұрын
THANKS
@Riley_Christian
7 ай бұрын
If you wanna preserve the original mesh, then yes forsure 👍
@AceAnimations
11 ай бұрын
Very informative 💯
@jumpy2783
9 ай бұрын
This man is a topology wizard 🧌
@HappyGaminz
9 ай бұрын
That is a troll emoji.
@jumpy2783
9 ай бұрын
@@HappyGaminz I didn’t mean to call a troll a Wizard
@affinity3d
10 ай бұрын
Do you have a video explaining this process? I’m very interested and your short is very concise
@Feierabend22
10 ай бұрын
he just did... pull up a knife with "k", then cut it and move the part in the front upwards and adjust or bevel some edges
@unknownguy6686
10 ай бұрын
@@Feierabend22you’re forgetting the whole subdivision modifier applied to the mesh that allows it to be smooth like that. OP wants to know how to do that, not just what’s on the short.
@MagodosFrames
9 ай бұрын
@@unknownguy6686 Yep, he's forgeting about topology
@wall_game4577
7 ай бұрын
Simple deform, curve modification no. Add more polygon, yes
@Viraltubs
8 ай бұрын
amazing bro!
@babelette
9 ай бұрын
That's so cool. I'm a beginner so this is my first time seeing using 3D crusor like this. Most courses don't focus on this. However, I feel like you could've easily done a loop cut here. Any reason you did a knife cut?
@thatonegamer9860
9 ай бұрын
A lot of times with more complicated geometry, like the indented surface of the object in the video, I find that loop cuts are not often perfectly straight because the loop bends to fit the geometry next to it. A knife cut in the Z axis was the easiest way to get a perfectly straight cut in this situation. Hope this helps!
@blendermanstudio
9 ай бұрын
Thats amazing ❤
@leifdux7277
4 ай бұрын
my in-built one does it ever since its origin 😊
@captainofnumenor8221
8 ай бұрын
Awesome!!!
@gegi4577
9 ай бұрын
good video
@renspeene
10 ай бұрын
Great tips
@omnomgamer8633
9 ай бұрын
Ok so beginner here. What are you using to smooth the big polygons into nice curves?
@thatonegamer9860
9 ай бұрын
The most basic way to do it is shading the object smooth and using the subdivision surface modifier👍
@FRANCOPROHOLA
8 ай бұрын
subdivision surface modifier
@spacepotato2516
8 ай бұрын
@FRANCOPROHOLA this is wrong and evil
@Luluskuy
5 ай бұрын
@@spacepotato2516what? It's not? What do mean by that??
@squishybluecat
25 күн бұрын
@@spacepotato2516 What? Are you stupid?
@eingooglenutzer4125
10 ай бұрын
Nice Cockpit from Huracan. Respect!
@hitlex5639
9 ай бұрын
great
@AbyssalSoda
9 ай бұрын
I'd probs just use a lattice or mesh warp, origin I used on occasion when doing quick overhangs. Or realigning stubborn verts.
@laserr10000000
8 ай бұрын
love the texture
@Denomote
6 ай бұрын
there's no texture lol
@stablermusic
10 ай бұрын
I was expecting a curve but that works too, probably better
@GetbackupUltra
4 ай бұрын
This works, if the object has a subsurf modifier
@neio589
10 ай бұрын
Sooo smooth
@JustChillingfrfr
9 ай бұрын
I just use lattices
@aiperthatgotmutatedbytruth5638
8 ай бұрын
Can you release a tutorial on how can i shade and give lusture so effectively(texturing as well pls)
@kipchickensout
9 ай бұрын
i think shift+w also bends, and there might also be a bend modifier
@Cyanide157
5 ай бұрын
How did you make that depression or dent so smoothly, I want a tutorial for that
@dwsg1990
9 ай бұрын
That gives me master chief cryo chamber vibes for some reason
@frosti8787
3 ай бұрын
hard surface sigma
@gigabytegallery7305
9 ай бұрын
This is much appreciated, going to try this out on creating a Halo inspired sci-fi project
@gamewavelondon
8 ай бұрын
cool
@blacklotus432
8 ай бұрын
Nice
@theGoogol
6 ай бұрын
Use "A" for constrain cut
@hageby123jean1
8 ай бұрын
What I liked about 3D Max, is that you didn't have to worry much about that, about origin 3D cursor etc Blender, you needed to worry about that. So. Ey. You have my support.
@ArijanRace
8 ай бұрын
Thank you my friend. How does it work in 3ds max?
@hageby123jean1
8 ай бұрын
@@ArijanRace Better, and much more simplier when it comes to bending things or moving things. Was weird to go to Blender and not have the same as 3D Max. BUT! In the end, Blender is victorious for being free source and so many add ons and you don't need to pay license. And so much more what Blender can do now, Its Incredible. So I stand with Blender now 👍
@auto_addict_01
8 ай бұрын
Lamborghini ❤
@arthurwilliam2106
2 ай бұрын
hey how do you have that shiny surface?
@TheLofren
11 ай бұрын
Larrice or simple deform are your friends Also no need to change the 3d cursor just select from active origin
@jony466
11 ай бұрын
In some cases you need to change the 3d cursor cuz the origing might not be where you want to
@AdolfHitler-lk4vo
10 ай бұрын
simple deform is garbage
@lazypotato3707
10 ай бұрын
@@AdolfHitler-lk4voBarely any of the tools in blender is garbage, you're just garbage at using them.
@lightdark4340
10 ай бұрын
@@AdolfHitler-lk4vo I throw you in the bin every time.
@MondyTS
9 ай бұрын
When you select the psrt to bend if you use active origin this will not work
@yunzouwu757
10 ай бұрын
To make it easy and even to cut, clamp Shift
@Sigmash1
8 ай бұрын
New sub
@IrakliGogava
9 ай бұрын
you could use deform modifier without changing the base shape..
@elliejohnson2786
10 ай бұрын
Neat trick
@thatoneracerr5321
8 ай бұрын
I really want to see the final car.
@bluttur9519
9 ай бұрын
Hey Arijan It’s Darowebros/Nrrvideo, I’m just on a separate account. I was scrolling normally and saw this dude. Keep up the good work!
@root0062
10 ай бұрын
There are so many shortcuts I'm forgetting others for new ones..😅
@BECK_4D
9 ай бұрын
There is a point where you forget all the shortcuts but you know them all, and you just start using them naturally without thinking about them, just keep practicing and enjoy the process! :)
@N8-Squared
8 ай бұрын
If the topology allows it
@ghettomining7580
6 ай бұрын
could also use a curve modifier with an empty as point of reference.
@Denomote
6 ай бұрын
takes more time to setup
@dawodjamra5838
7 ай бұрын
What is the name of this program?
@sarcasme-_-6549
10 ай бұрын
He never told u that there is a subdivision modifier....that is also a reason why it is so smooth. But nice vid anyways bro!
@fribiesdi
10 ай бұрын
Isn't it fucking obvious when you take a look at the geometry in edit mode???
@topraktunca1829
9 ай бұрын
hmm I think everyone can easily spot there is a subdivision modifier
@sarcasme-_-6549
9 ай бұрын
@@fribiesdi Ok and?
@EmvyBeats
Жыл бұрын
did you use a Sub D?
@Babarin
Жыл бұрын
DAMN 💯
@MiltonDiasIIID
6 ай бұрын
Blender dont have a bend deformer?
@rajarajanmanoharan
8 ай бұрын
Step 1: Have great topology… 😅
@hamzanawaz4545
Жыл бұрын
phenominal trick
@plus2403
9 ай бұрын
What is the name of the track that plays in the background? Very nice one. I'm listening it on repeat.
@hrihori_art
9 ай бұрын
kzitem.info/news/bejne/z6GkyaSZmqCdrGU
@Sheikh-uddin
9 ай бұрын
I need also this 😢😢😢😢 but I don't have enough money sad 😢😢😢
@rnpk9572
10 ай бұрын
❤
@ademedis5565
10 ай бұрын
this which programme
@tudoriftimia5274
9 ай бұрын
What is the programm?
@DisalaShorts
4 ай бұрын
What is the gpu
@topy706
7 ай бұрын
using maya workflow in blender lol nice
@joseenriquejoson1994
Ай бұрын
Name of music?
@azzytheangel5494
9 ай бұрын
Wouldn't it be easier to just use a loop cut?
@boxodoge9780
Жыл бұрын
why did i think that was a phone case
@auto_addict_01
8 ай бұрын
Lamborghini Interior 🤔🤔🤔🤔🤔
@radicant7283
3 ай бұрын
This is just basic mesh editing though?
@mrsweetkandy7673
10 ай бұрын
I'm confused, why the knife tool instead of a loop cut? I'm a beginner so idk if there is anything i'm missing, as i feel a loop cut would be faster/easier to use in that context. Is there something i'm not thinking about?
@hanwencao1793
10 ай бұрын
a loop cut in that situation wouldn’t be a perfect circle cut
@Paul_Ward
10 ай бұрын
A loop cut would fix points between the two vertices either side of the indices they're being applied to depending on the distance of the indices. So it would be a wonky line. A knife cut will be straight using z, y or x key to bind the cut to that axis.
@Teh_Random_Canadian
10 ай бұрын
@@hanwencao1793However you could loop cut then straighten it with Scale > Y > 0
@hanwencao1793
10 ай бұрын
@@Teh_Random_Canadian i never knew that, thx!
@h10hunter
10 ай бұрын
Also, after loop cut, if you open the panel that pops up you can select how straight it is 😊
@AviYanK_770
8 ай бұрын
Cinema 4D - Bend Deformer🗿
@Bartokz
10 ай бұрын
what is the best addon for hard surface modellimg?
@joseruano539
9 ай бұрын
Box cutter and HardOps, I think both are great for that
@142vids
8 ай бұрын
Shorts are the worst shit the internet created. No favouriting, no adding to album, no fast forwarding.
@frogybot
10 ай бұрын
what u makin?
@FelixS088
4 ай бұрын
You proved me wrong 3D cursor is not useless sh*t
@MAXGAMINGYT265
10 ай бұрын
Without 3d cursor, Maya, Max,.. be😢😢
@jostasizzi818
11 ай бұрын
What is the song
@plus2403
9 ай бұрын
Aamol Acharya - Mafia
@jostasizzi818
8 ай бұрын
@@plus2403thanks
@passion_proh-jects
6 ай бұрын
Depressingly good... not the bend, obviously. Anyone can bend...
@hyperunboxing9304
8 ай бұрын
I thought it was Autodesk maya😐
@obsleet
9 ай бұрын
I thought it was going to be some trick. And then dude just used blender's basic modeling functions. lol.
@KG_BM
Жыл бұрын
Hooooly shit
@MrBrigadierArchived
9 ай бұрын
If anyone want to do this not only with Subd model, you still can use Proportional Editing Tool (righter from magnet icon above) and Lattice. The result will be the same.
@superduper7911
3 ай бұрын
Rhino is so much better at this
@Igrabbedcactus
6 ай бұрын
Too complicated, ill just give up
@The_Founder16
11 ай бұрын
Ever heard of simple deform?
@pyro_02
6 ай бұрын
We are in 2023 and this programs can’t bend a piece by using an AI and just letting you choose your desired degree angle an the point where it bends
@user-gj4zt1be3l
4 ай бұрын
genius with Subdivision...fake tutor.
@ArijanRace
4 ай бұрын
Shut up fool
@consilx2985
9 ай бұрын
просто сделать CRTL R ??????? Я для тебя шутка какая то ?
@THETALETSPLAY
11 ай бұрын
Don't understand. Why mesh bend smooth? You create hard line. Bad video :/
@ArijanRace
11 ай бұрын
It's smooth because of subdivision surface. Just because you don't understand something doesn't mean it's bad.
@THETALETSPLAY
11 ай бұрын
@@ArijanRace Then you showed what is so obvious. I would show you how to enable subdivs so that it would be so smooth - then ok.
@comradeboris2335
11 ай бұрын
I mean there might be better ways to do this but that depends on your workflow, thats the whole point of blender and 3d modeling in general. You find the way that fits your workflow the best. From what i see the method arijan used works well enough for the purpose he needs it for
@THETALETSPLAY
11 ай бұрын
@@comradeboris2335 I mean he didn't show How to do it, he showed what it looks like. It's like calling a video "how to make a ball soft", but in the video itself, squeezing the ball with hands and saying "look, it's soft". Question How is not disclosed.
@comradeboris2335
11 ай бұрын
@@THETALETSPLAY you cant be serious? Did you just watch the first 5 seconds? If youre looking for an indepth tutorial on how to do this then a short is probably not the best place to do so
@Chelogovrik
11 ай бұрын
Bro💀 don't use blender again
@ArijanRace
11 ай бұрын
Look in the mirror my friend
@Teh_Random_Canadian
10 ай бұрын
Why are you guys commenting this crap? Don't like his technique then don't watch. There is enough toxicity out there, don't add to it.
Пікірлер: 164