Featured Repair Kit: www.stormsure.com/boot-shoe-a...
-----------------------------------------------------------------------------------------------------------------
Got a pinhole in your favorite Wellington boots? Don't worry; Stormsure has you covered with our Boot and Shoe Repair Kit! In this comprehensive tutorial, we'll walk you through the simple steps to repair that pesky pinhole, making your boots as good as new.
All you'll need is for this repair is the Stormsure Boot and Shoe Repair Kit (available on our website, Amazon, and selected retailers), or a tube of Stormsure Flexible Repair Adhesive.
1. Clean the boots and sandpaper the area around the hole to ensure the glue will stick properly to the boot (this will make your repair last longer).
2. Cover the hole and the area around the hole in as much glue as is needed (not so much that it starts dripping off though).
3. Make sure the repair is level so nothing will run or drip while it is curing.
4. Leave it to cure for 12 hours (curing time will vary depending on conditions like humidity, temperature etc.)
5. Once cured, clean the area.
6. Enjoy your repaired boots!
Feel free to send us any pictures of your repair via email or social media too!
-----------------------------------------------------------------------------------------------------------------
Music: (massobeats - serenity: • [non copyright music] massobeats - serenity) • massobeats - serenity ...
Instagram: / stormsure
Twitter: / stormsure
For enquiries: sales@stormsure.com
Негізгі бет Тәжірибелік нұсқаулар және стиль Easy Leaky Boot Repair with Stormsure
Пікірлер